Categories 4
Product Result
-
ITEM NO : 2000769
10mmx19mm CYLINDRICAL BALL NOSED CARB' BURR DBL CU
BRAND : YORK
PART NO : YRK2101246K
Carbide Rotary Burrs - Cylindrical Ball Nosed Cylindrical Ball Nosed. All sizes are nominal with a 6mm shank unless other wise stated. Cut Numbers: Cut 3 - Rapid Cut. for use on softer non ferrous and plastic materials, i.e aluminium, fibreglass, plastics, hard rubber and zinc alloy, Cut 6 - Double Cut. Crosscut and double cut to improve control and chipbreaks. Manufactured from high grade tungsten carbide for general-purpose use. Cut 9 - Chipbreaker Chipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron. Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc. up to HRC65 hardness. Please note: • Work piece and tools should always be steady and well supported. • Carbide burrs are not suitable for 'milling' large amounts of material, they are for light stock removal and high revolutions 'LOW FEED - HIGH SPEED'. • Always ensure that at least 70% of the shank length is clamped by the collet or chuck of the tool being used. • Always ensure that the tool is rated to the recommended operating speed of the burr.
price : 936.00 Baht / EA
Stock Location QTY Lead time (Days) Local Thailand 918 7 International 918 25 -
ITEM NO : 2000739
10mmx19mm CYLINDRICAL ENDCUT CARBIDE BURR CUT-9
BRAND : YORK
PART NO : YRK2100249K
Carbide Rotary Burrs - Cylindrical-End Cutting Cylindrical-End Cutting All sizes are nominal with a 6mm shank unless other wise stated. Cut Numbers: Cut 3 - Rapid Cut. for use on softer non ferrous and plastic materials, i.e aluminium, fibreglass, plastics, hard rubber and zinc alloy, Cut 6 - Double Cut. Crosscut and double cut to improve control and chipbreaks. Manufactured from high grade tungsten carbide for general-purpose use. Cut 9 - Chipbreaker Chipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron. Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc. up to HRC65 hardness. Please note: • Work piece and tools should always be steady and well supported. • Carbide burrs are not suitable for 'milling' large amounts of material, they are for light stock removal and high revolutions 'LOW FEED - HIGH SPEED'. • Always ensure that at least 70% of the shank length is clamped by the collet or chuck of the tool being used. • Always ensure that the tool is rated to the recommended operating speed of the burr.
price : 1,000.00 Baht / EA
Stock Location QTY Lead time (Days) Local Thailand 618 7 International 618 25 -
ITEM NO : 2000738
10mmx19mm CYLINDRICAL ENDCUT CARBIDE BURR DBL CUT
BRAND : YORK
PART NO : YRK2100246K
Carbide Rotary Burrs - Cylindrical-End Cutting Cylindrical-End Cutting All sizes are nominal with a 6mm shank unless other wise stated. Cut Numbers: Cut 3 - Rapid Cut. for use on softer non ferrous and plastic materials, i.e aluminium, fibreglass, plastics, hard rubber and zinc alloy, Cut 6 - Double Cut. Crosscut and double cut to improve control and chipbreaks. Manufactured from high grade tungsten carbide for general-purpose use. Cut 9 - Chipbreaker Chipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron. Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc. up to HRC65 hardness. Please note: • Work piece and tools should always be steady and well supported. • Carbide burrs are not suitable for 'milling' large amounts of material, they are for light stock removal and high revolutions 'LOW FEED - HIGH SPEED'. • Always ensure that at least 70% of the shank length is clamped by the collet or chuck of the tool being used. • Always ensure that the tool is rated to the recommended operating speed of the burr.
price : 866.00 Baht / EA
Stock Location QTY Lead time (Days) Local Thailand 134 7 International 133 25 -
ITEM NO : 2000755
10mmx19mm CYLINDRICAL PLAIN END CARB' BURR DBL CUT
BRAND : YORK
PART NO : YRK2100746K
Carbide Rotary Burrs - Cylindrical Plain End Cut 6 double cut tungsten carbide rotary burrs feature a crosscut and double cut to improve control of chipbreaks. They are manufactured from high grade tungsten carbide for general-purpose use. Features and Benefits • Tungsten carbide construction for increased strength • Crosscut and double cut improves control of chipbreaks • Ideal for general purpose machining Typical Applications • Deburring • Polishing • Cast iron • Cast steel • Carbon steel • Alloy steel • Stainless steel up to HRC65 hardness. Notes • Work piece and tools should always be steady and well supported. • Carbide burrs are not suitable for 'milling' large amounts of material, they are for light stock removal and high revolutions 'LOW FEED - HIGH SPEED'. • Always ensure that at least 70% of the shank length is clamped by the collet or chuck of the tool being used. • Always ensure that the tool is rated to the recommended operating speed of the burr.
price : 949.00 Baht / EA
Stock Location QTY Lead time (Days) Local Thailand 421 7 International 414 25 -
ITEM NO : 2000787
10mmx19mm ROUND TREE CARBIDE BURR CUT-9
BRAND : YORK
PART NO : YRK2103249K
Carbide Rotary Burr - Round Tree Round Tree. All sizes are nominal with a 6mm shank unless other wise stated. Cut Numbers: Cut 6 - Double Cut. Crosscut and double cut to improve control and chipbreaks. Manufactured from high grade tungsten carbide for general-purpose use. Cut 9 - Chipbreaker Chipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron. Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc. up to HRC65 hardness. Please note: • Work piece and tools should always be steady and well supported. • Carbide burrs are not suitable for 'milling' large amounts of material, they are for light stock removal and high revolutions 'LOW FEED - HIGH SPEED'. • Always ensure that at least 70% of the shank length is clamped by the collet or chuck of the tool being used. • Always ensure that the tool is rated to the recommended operating speed of the burr.
price : 801.00 Baht / EA
Stock Location QTY Lead time (Days) Local Thailand 872 7 International 872 25 -
ITEM NO : 2000786
10mmx19mm ROUND TREE CARBIDE BURR DBL CUT
BRAND : YORK
PART NO : YRK2103246K
Carbide Rotary Burr - Round Tree Round Tree. All sizes are nominal with a 6mm shank unless other wise stated. Cut Numbers: Cut 6 - Double Cut. Crosscut and double cut to improve control and chipbreaks. Manufactured from high grade tungsten carbide for general-purpose use. Cut 9 - Chipbreaker Chipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron. Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc. up to HRC65 hardness. Please note: • Work piece and tools should always be steady and well supported. • Carbide burrs are not suitable for 'milling' large amounts of material, they are for light stock removal and high revolutions 'LOW FEED - HIGH SPEED'. • Always ensure that at least 70% of the shank length is clamped by the collet or chuck of the tool being used. • Always ensure that the tool is rated to the recommended operating speed of the burr.
price : 801.00 Baht / EA
Stock Location QTY Lead time (Days) Local Thailand 511 7 International 511 25 -
ITEM NO : 2000701
10x10mm BALL SHAPE CARBIDE BURR CUT 3
BRAND : KENNEDY
PART NO : KEN2106220K
Carbide Burrs - Ball Shape Ball Shape All sizes are nominal. Sizes marked * are 3mm shank, all others are 6mm shank. Cut Numbers: Cut 3 - Rapid Cut For use on softer non-ferrous and plastic materials, i.e. aluminium, fibreglass, plastics, hard rubber and zinc alloy. Cut 9 - Chipbreaker Chipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron.
price : 1,041.00 Baht / EA
Stock Location QTY Lead time (Days) Local Thailand 110 7 International 110 25 -
ITEM NO : 2000702
10x10mm BALL SHAPE CARBIDE BURR CUT 9
BRAND : KENNEDY
PART NO : KEN2106240K
Carbide Burrs - Ball Shape Ball Shape All sizes are nominal. Sizes marked * are 3mm shank, all others are 6mm shank. Cut Numbers: Cut 3 - Rapid Cut For use on softer non-ferrous and plastic materials, i.e. aluminium, fibreglass, plastics, hard rubber and zinc alloy. Cut 9 - Chipbreaker Chipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron.
price : 781.00 Baht / EA
Stock Location QTY Lead time (Days) Local Thailand 1 7 International 1 25 -
ITEM NO : 2000693
10x15mm OVAL SHAPE CARBIDE BURR CUT 9
BRAND : KENNEDY
PART NO : KEN2105200K
Carbide Burrs - Oval Shape Oval Shape. All sizes are nominal. Sizes marked * are 3mm shank, all others are 6mm shank. Cut Numbers: Cut 3 - Rapid Cut For use on softer non-ferrous and plastic materials, i.e. aluminium, fibreglass, plastics, hard rubber and zinc alloy. Cut 9 - Chipbreaker Chipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron. Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc. up to HRC65 hardness. Please note: Workpiece and tools should always be steady and well supported. Carbide burrs are not suitable for 'milling' large amounts of material, they are for light stock removal at high rpm's 'LOW FEED - HIGH SPEED'. Always ensure that at least 70% of the shank length is clamped by the collet or chuck of the tool being used. Always ensure that the tool is rated to the recommended operating speed of the burr.
price : 781.00 Baht / EA
Stock Location QTY Lead time (Days) Local Thailand 333 7 International 333 25 -
ITEM NO : 2000708
10x20mm CONICAL SHAPE CARBIDE BURR CUT 9
BRAND : KENNEDY
PART NO : KEN2107240K
Carbide Burrs - Conical Conical. All sizes are nominal. Sizes marked * are 3mm shank, all others are 6mm shank. Cut Numbers: Cut 9 - Chipbreaker Chipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron. Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc. up to HRC65 hardness. Please note: Workpiece and tools should always be steady and well supported. Carbide burrs are not suitable for 'milling' large amounts of material, they are for light stock removal at high rpm's 'LOW FEED - HIGH SPEED'. Always ensure that at least 70% of the shank length is clamped by the collet or chuck of the tool being used. Always ensure that the tool is rated to the recommended operating speed of the burr.
price : 956.00 Baht / EA
Stock Location QTY Lead time (Days) Local Thailand 173 7 International 173 25 -
ITEM NO : 2000668
10x20mm CYL. CARBIDE BALLNOSE BURR CUT 3
BRAND : KENNEDY
PART NO : KEN2101220K
Carbide Burrs - Cylindrical Ball Nosed Cylindrical Ball Nosed All sizes are nominal. Sizes marked * are 3mm shank, all others are 6mm shank. Cut Numbers: Cut 3 - Rapid Cut For use on softer non-ferrous and plastic materials, i.e. aluminium, fibreglass, plastics, hard rubber and zinc alloy. Cut 9 - Chipbreaker Chipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron. Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc. up to HRC65 hardness. Please note: Workpiece and tools should always be steady and well supported. Carbide burrs are not suitable for 'milling' large amounts of material, they are for light stock removal at high rpm's 'LOW FEED - HIGH SPEED'. Always ensure that at least 70% of the shank length is clamped by the collet or chuck of the tool being used. Always ensure that the tool is rated to the recommended operating speed of the burr.
price : 1,350.00 Baht / EA
Stock Location QTY Lead time (Days) Local Thailand 2 7 International 2 25 -
ITEM NO : 2000669
10x20mm CYL. CARBIDE BALLNOSE BURR CUT 9
BRAND : KENNEDY
PART NO : KEN2101240K
Carbide Burrs - Cylindrical Ball Nosed Cylindrical Ball Nosed All sizes are nominal. Sizes marked * are 3mm shank, all others are 6mm shank. Cut Numbers: Cut 3 - Rapid Cut For use on softer non-ferrous and plastic materials, i.e. aluminium, fibreglass, plastics, hard rubber and zinc alloy. Cut 9 - Chipbreaker Chipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron. Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc. up to HRC65 hardness. Please note: Workpiece and tools should always be steady and well supported. Carbide burrs are not suitable for 'milling' large amounts of material, they are for light stock removal at high rpm's 'LOW FEED - HIGH SPEED'. Always ensure that at least 70% of the shank length is clamped by the collet or chuck of the tool being used. Always ensure that the tool is rated to the recommended operating speed of the burr.
price : 1,013.00 Baht / EA
Stock Location QTY Lead time (Days) Local Thailand 3113 7 International 3113 25 -
ITEM NO : 2000647
10x20mm CYL. CARBIDE ENDCUT BURR CUT 3
BRAND : KENNEDY
PART NO : KEN2100220K
Carbide Burrs - Cylindrical-End Cutting Cylindrical-End Cutting. All sizes are nominal. Sizes marked * are 3mm shank, all others are 6mm shank. Cut Numbers: Cut 3 - Rapid Cut For use on softer non-ferrous and plastic materials, i.e. aluminium, fibreglass, plastics, hard rubber and zinc alloy. Cut 9 - Chipbreaker Chipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron. Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc. up to HRC65 hardness. Please note: Workpiece and tools should always be steady and well supported. Carbide burrs are not suitable for 'milling' large amounts of material, they are for light stock removal at high rpm's 'LOW FEED - HIGH SPEED'. Always ensure that at least 70% of the shank length is clamped by the collet or chuck of the tool being used. Always ensure that the tool is rated to the recommended operating speed of the burr.
price : 1,554.00 Baht / EA
Stock Location QTY Lead time (Days) Local Thailand 85 7 International 85 25 -
ITEM NO : 2000648
10x20mm CYL. CARBIDE ENDCUT BURR CUT 9
BRAND : KENNEDY
PART NO : KEN2100240K
Carbide Burrs - Cylindrical-End Cutting Cylindrical-End Cutting. All sizes are nominal. Sizes marked * are 3mm shank, all others are 6mm shank. Cut Numbers: Cut 3 - Rapid Cut For use on softer non-ferrous and plastic materials, i.e. aluminium, fibreglass, plastics, hard rubber and zinc alloy. Cut 9 - Chipbreaker Chipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron. Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc. up to HRC65 hardness. Please note: Workpiece and tools should always be steady and well supported. Carbide burrs are not suitable for 'milling' large amounts of material, they are for light stock removal at high rpm's 'LOW FEED - HIGH SPEED'. Always ensure that at least 70% of the shank length is clamped by the collet or chuck of the tool being used. Always ensure that the tool is rated to the recommended operating speed of the burr.
price : 843.00 Baht / EA
Stock Location QTY Lead time (Days) Local Thailand 281 7 International 281 25 -
ITEM NO : 2000658
10x20mm CYL. CARBIDE PLAIN END BURR CUT 9
BRAND : KENNEDY
PART NO : KEN2100740K
Carbide Burrs - Cylindrical Plain End Cylindrical Plain End. All sizes are nominal. Sizes marked * are 3mm shank, all others are 6mm shank. Cut Numbers: Cut 3 - Rapid Cut For use on softer non-ferrous and plastic materials, i.e. aluminium, fibreglass, plastics, hard rubber and zinc alloy. Cut 9 - Chipbreaker Chipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron. Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc. up to HRC65 hardness. Please note: Workpiece and tools should always be steady and well supported. Carbide burrs are not suitable for 'milling' large amounts of material, they are for light stock removal at high rpm's 'LOW FEED - HIGH SPEED'. Always ensure that at least 70% of the shank length is clamped by the collet or chuck of the tool being used. Always ensure that the tool is rated to the recommended operating speed of the burr.
price : 877.00 Baht / EA
Stock Location QTY Lead time (Days) Local Thailand 8 7 International 8 25 -
ITEM NO : 2000687
10x20mm POINTED TREE CARBIDE BURR CUT 9
BRAND : KENNEDY
PART NO : KEN2104240K
Carbide Burrs - Pointed Tree Pointed Tree. All sizes are nominal. Sizes marked * are 3mm shank, all others are 6mm shank. Cut Numbers: Cut 9 - Chipbreaker Chipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron.
price : 1,006.00 Baht / EA
Stock Location QTY Lead time (Days) Local Thailand 9 7 International 9 25 -
ITEM NO : 2000679
10x20mm ROUND TREE CARBIDE BURR CUT 3
BRAND : KENNEDY
PART NO : KEN2103220K
Carbide Burrs - Round Tree Round Tree All sizes are nominal. Sizes marked * are 3mm shank, all others are 6mm shank. Cut Numbers: Cut 3 - Rapid Cut For use on softer non-ferrous and plastic materials, i.e. aluminium, fibreglass, plastics, hard rubber and zinc alloy. Cut 9 - Chipbreaker Chipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron. Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc. up to HRC65 hardness. Please note: Workpiece and tools should always be steady and well supported. Carbide burrs are not suitable for 'milling' large amounts of material, they are for light stock removal at high rpm's 'LOW FEED - HIGH SPEED'. Always ensure that at least 70% of the shank length is clamped by the collet or chuck of the tool being used. Always ensure that the tool is rated to the recommended operating speed of the burr.
price : 1,752.00 Baht / EA
Stock Location QTY Lead time (Days) Local Thailand 530 7 International 530 25 -
ITEM NO : 2000680
10x20mm ROUND TREE CARBIDE BURR CUT 9
BRAND : KENNEDY
PART NO : KEN2103240K
Carbide Burrs - Round Tree Round Tree All sizes are nominal. Sizes marked * are 3mm shank, all others are 6mm shank. Cut Numbers: Cut 3 - Rapid Cut For use on softer non-ferrous and plastic materials, i.e. aluminium, fibreglass, plastics, hard rubber and zinc alloy. Cut 9 - Chipbreaker Chipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron. Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc. up to HRC65 hardness. Please note: Workpiece and tools should always be steady and well supported. Carbide burrs are not suitable for 'milling' large amounts of material, they are for light stock removal at high rpm's 'LOW FEED - HIGH SPEED'. Always ensure that at least 70% of the shank length is clamped by the collet or chuck of the tool being used. Always ensure that the tool is rated to the recommended operating speed of the burr.
price : 997.00 Baht / EA
Stock Location QTY Lead time (Days) Local Thailand 607 7 International 543 25 -
ITEM NO : 2000714
10x26mm CONICAL 14DEG. CARBIDE BURR CUT 3
BRAND : KENNEDY
PART NO : KEN2108220K
Carbide Burrs - Conical 14° Conical 14°. All sizes are nominal. Sizes marked * are 3mm shank, all others are 6mm shank. Cut Numbers: Cut 3 - Rapid Cut For use on softer non-ferrous and plastic materials, i.e. aluminium, fibreglass, plastics, hard rubber and zinc alloy. Cut 9 - Chipbreaker Chipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron. Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc. up to HRC65 hardness. Please note: Workpiece and tools should always be steady and well supported. Carbide burrs are not suitable for 'milling' large amounts of material, they are for light stock removal at high rpm's 'LOW FEED - HIGH SPEED'. Always ensure that at least 70% of the shank length is clamped by the collet or chuck of the tool being used. Always ensure that the tool is rated to the recommended operating speed of the burr.
price : 1,674.00 Baht / EA
Stock Location QTY Lead time (Days) Local Thailand 15 7 International 15 25 -
ITEM NO : 2000722
10x4mm CONICAL 90DEG. CARBIDE BURR CUT 9
BRAND : KENNEDY
PART NO : KEN2108930K
Carbide Burrs - Conical 90° Conical 90° Inc. Angle. All sizes are nominal. Sizes marked * are 3mm shank, all others are 6mm shank. Cut Numbers: Cut 9 - Chipbreaker Chipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron. Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc. up to HRC65 hardness. Please note: Workpiece and tools should always be steady and well supported. Carbide burrs are not suitable for 'milling' large amounts of material, they are for light stock removal at high rpm's 'LOW FEED - HIGH SPEED'. Always ensure that at least 70% of the shank length is clamped by the collet or chuck of the tool being used. Always ensure that the tool is rated to the recommended operating speed of the burr.
price : 799.00 Baht / EA
Stock Location QTY Lead time (Days) Local Thailand 58 7 International 58 25 -
ITEM NO : 2000772
11x25mm CYLINDRICAL BALLNOSE CARBIDE BURR CUT-9
BRAND : YORK
PART NO : YRK2101329K
Carbide Rotary Burrs - Cylindrical Ball Nosed Cylindrical Ball Nosed. All sizes are nominal with a 6mm shank unless other wise stated. Cut Numbers: Cut 3 - Rapid Cut. for use on softer non ferrous and plastic materials, i.e aluminium, fibreglass, plastics, hard rubber and zinc alloy, Cut 6 - Double Cut. Crosscut and double cut to improve control and chipbreaks. Manufactured from high grade tungsten carbide for general-purpose use. Cut 9 - Chipbreaker Chipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron. Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc. up to HRC65 hardness. Please note: • Work piece and tools should always be steady and well supported. • Carbide burrs are not suitable for 'milling' large amounts of material, they are for light stock removal and high revolutions 'LOW FEED - HIGH SPEED'. • Always ensure that at least 70% of the shank length is clamped by the collet or chuck of the tool being used. • Always ensure that the tool is rated to the recommended operating speed of the burr.
price : 1,217.00 Baht / EA
Stock Location QTY Lead time (Days) Local Thailand 416 7 International 416 25 -
ITEM NO : 2000819
11x9.5mm BALL SHAPE CARBIDE BURR CUT-9
BRAND : YORK
PART NO : YRK2106249K
Carbide Rotary Burrs - Ball Shape Ball Shape. All sizes are nominal with a 6mm shank unless other wise stated. Cut Numbers: Cut 6 - Double Cut. Crosscut and double cut to improve control and chipbreaks. Manufactured from high grade tungsten carbide for general-purpose use. Cut 9 - Chipbreaker Chipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron. Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc. up to HRC65 hardness. Please note: • Work piece and tools should always be steady and well supported. • Carbide burrs are not suitable for 'milling' large amounts of material, they are for light stock removal and high revolutions 'LOW FEED - HIGH SPEED'. • Always ensure that at least 70% of the shank length is clamped by the collet or chuck of the tool being used. • Always ensure that the tool is rated to the recommended operating speed of the burr.
price : 1,005.00 Baht / EA
Stock Location QTY Lead time (Days) Local Thailand 169 7 International 168 25 -
ITEM NO : 2000818
11x9.5mm BALL SHAPE CARBIDE BURR DBL CUT
BRAND : YORK
PART NO : YRK2106246K
Carbide Rotary Burrs - Ball Shape Ball Shape. All sizes are nominal with a 6mm shank unless other wise stated. Cut Numbers: Cut 6 - Double Cut. Crosscut and double cut to improve control and chipbreaks. Manufactured from high grade tungsten carbide for general-purpose use. Cut 9 - Chipbreaker Chipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron. Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc. up to HRC65 hardness. Please note: • Work piece and tools should always be steady and well supported. • Carbide burrs are not suitable for 'milling' large amounts of material, they are for light stock removal and high revolutions 'LOW FEED - HIGH SPEED'. • Always ensure that at least 70% of the shank length is clamped by the collet or chuck of the tool being used. • Always ensure that the tool is rated to the recommended operating speed of the burr.
price : 804.00 Baht / EA
Stock Location QTY Lead time (Days) Local Thailand 302 7 International 302 25 -
ITEM NO : 2000821
12.7x11mm BALL SHAPE CARBIDE BURR CUT-9
BRAND : YORK
PART NO : YRK2106329K
Carbide Rotary Burrs - Ball Shape Ball Shape. All sizes are nominal with a 6mm shank unless other wise stated. Cut Numbers: Cut 6 - Double Cut. Crosscut and double cut to improve control and chipbreaks. Manufactured from high grade tungsten carbide for general-purpose use. Cut 9 - Chipbreaker Chipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron. Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc. up to HRC65 hardness. Please note: • Work piece and tools should always be steady and well supported. • Carbide burrs are not suitable for 'milling' large amounts of material, they are for light stock removal and high revolutions 'LOW FEED - HIGH SPEED'. • Always ensure that at least 70% of the shank length is clamped by the collet or chuck of the tool being used. • Always ensure that the tool is rated to the recommended operating speed of the burr.
price : 1,206.00 Baht / EA
Stock Location QTY Lead time (Days) Local Thailand 22 7 International 22 25 -
ITEM NO : 2000820
12.7x11mm BALL SHAPE CARBIDE BURR DBL CUT
BRAND : YORK
PART NO : YRK2106326K
Carbide Rotary Burrs - Ball Shape Ball Shape. All sizes are nominal with a 6mm shank unless other wise stated. Cut Numbers: Cut 6 - Double Cut. Crosscut and double cut to improve control and chipbreaks. Manufactured from high grade tungsten carbide for general-purpose use. Cut 9 - Chipbreaker Chipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron. Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc. up to HRC65 hardness. Please note: • Work piece and tools should always be steady and well supported. • Carbide burrs are not suitable for 'milling' large amounts of material, they are for light stock removal and high revolutions 'LOW FEED - HIGH SPEED'. • Always ensure that at least 70% of the shank length is clamped by the collet or chuck of the tool being used. • Always ensure that the tool is rated to the recommended operating speed of the burr.
price : 904.00 Baht / EA
Stock Location QTY Lead time (Days) Local Thailand 10 7 International 10 25 -
ITEM NO : 2000871
12.7x12.7mm INVERTED CONEC/B BURR CUT 9
BRAND : YORK
PART NO : YRK2109329K
Carbide Rotary Burrs - Inverted Cone Inverted Cone. All sizes are nominal with a 6mm shank unless other wise stated. Cut 9 - Chipbreaker Chipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron. Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc. up to HRC65 hardness. Please note: • Work piece and tools should always be steady and well supported. • Carbide burrs are not suitable for 'milling' large amounts of material, they are for light stock removal and high revolutions 'LOW FEED - HIGH SPEED'. • Always ensure that at least 70% of the shank length is clamped by the collet or chuck of the tool being used. • Always ensure that the tool is rated to the recommended operating speed of the burr.
price : 1,196.00 Baht / EA
Stock Location QTY Lead time (Days) Local Thailand 73 7 International 73 25 -
ITEM NO : 2000797
12.7x19mm POINTED TREE CARBIDE BURR CUT-9
BRAND : YORK
PART NO : YRK2104289K
Carbide Rotary Burrs - Pointed Tree Pointed Tree. All sizes are nominal with a 6mm shank unless other wise stated. Cut Numbers: Cut 6 - Double Cut. Crosscut and double cut to improve control and chipbreaks. Manufactured from high grade tungsten carbide for general-purpose use. Cut 9 - Chipbreaker Chipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron. Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc. up to HRC65 hardness. Please note: • Work piece and tools should always be steady and well supported. • Carbide burrs are not suitable for 'milling' large amounts of material, they are for light stock removal and high revolutions 'LOW FEED - HIGH SPEED'. • Always ensure that at least 70% of the shank length is clamped by the collet or chuck of the tool being used. • Always ensure that the tool is rated to the recommended operating speed of the burr.
price : 1,114.00 Baht / EA
Stock Location QTY Lead time (Days) Local Thailand 106 7 International 106 25 -
ITEM NO : 2000831
12.7x22mm CONICAL SHAPE BURR DBL CUT
BRAND : YORK
PART NO : YRK2107326K
Carbide Rotary Burrs - Conical Shape Conical Shape. All sizes are nominal with a 6mm shank unless other wise stated. Cut Numbers: Cut 6 - Double Cut. Crosscut and double cut to improve control and chipbreaks. Manufactured from high grade tungsten carbide for general-purpose use. Cut 9 - Chipbreaker Chipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron. Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc. up to HRC65 hardness. Please note: • Work piece and tools should always be steady and well supported. • Carbide burrs are not suitable for 'milling' large amounts of material, they are for light stock removal and high revolutions 'LOW FEED - HIGH SPEED'. • Always ensure that at least 70% of the shank length is clamped by the collet or chuck of the tool being used. • Always ensure that the tool is rated to the recommended operating speed of the burr.
price : 1,013.00 Baht / EA
Stock Location QTY Lead time (Days) Local Thailand 315 7 International 315 25 -
ITEM NO : 2000832
12.7x22mm CONICAL SHAPE CARBIDE BURR CUT-9
BRAND : YORK
PART NO : YRK2107329K
Carbide Rotary Burrs - Conical Shape Conical Shape. All sizes are nominal with a 6mm shank unless other wise stated. Cut Numbers: Cut 6 - Double Cut. Crosscut and double cut to improve control and chipbreaks. Manufactured from high grade tungsten carbide for general-purpose use. Cut 9 - Chipbreaker Chipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron. Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc. up to HRC65 hardness. Please note: • Work piece and tools should always be steady and well supported. • Carbide burrs are not suitable for 'milling' large amounts of material, they are for light stock removal and high revolutions 'LOW FEED - HIGH SPEED'. • Always ensure that at least 70% of the shank length is clamped by the collet or chuck of the tool being used. • Always ensure that the tool is rated to the recommended operating speed of the burr.
price : 1,013.00 Baht / EA
Stock Location QTY Lead time (Days) Local Thailand 10 7 International 10 25 -
ITEM NO : 2000808
12.7x22mm OVAL SHAPE CARBIDE BURR CUT-9
BRAND : YORK
PART NO : YRK2105249K
Carbide Rotary Burrs - Oval shape Oval Shape. All sizes are nominal with a 6mm shank unless other wise stated. Cut 9 - Chipbreaker Chipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron. Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc. up to HRC65 hardness. Please note: • Work piece and tools should always be steady and well supported. • Carbide burrs are not suitable for 'milling' large amounts of material, they are for light stock removal and high revolutions 'LOW FEED - HIGH SPEED'. • Always ensure that at least 70% of the shank length is clamped by the collet or chuck of the tool being used. • Always ensure that the tool is rated to the recommended operating speed of the burr.
price : 1,052.00 Baht / EA
Stock Location QTY Lead time (Days) Local Thailand 19 7 International 19 25 -
ITEM NO : 2000771
12.7x25mm CYLINDRICAL BALL NOSED CARB' BURR DBL CU
BRAND : YORK
PART NO : YRK2101326K
Carbide Rotary Burrs - Cylindrical Ball Nosed Cylindrical Ball Nosed. All sizes are nominal with a 6mm shank unless other wise stated. Cut Numbers: Cut 3 - Rapid Cut. for use on softer non ferrous and plastic materials, i.e aluminium, fibreglass, plastics, hard rubber and zinc alloy, Cut 6 - Double Cut. Crosscut and double cut to improve control and chipbreaks. Manufactured from high grade tungsten carbide for general-purpose use. Cut 9 - Chipbreaker Chipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron. Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc. up to HRC65 hardness. Please note: • Work piece and tools should always be steady and well supported. • Carbide burrs are not suitable for 'milling' large amounts of material, they are for light stock removal and high revolutions 'LOW FEED - HIGH SPEED'. • Always ensure that at least 70% of the shank length is clamped by the collet or chuck of the tool being used. • Always ensure that the tool is rated to the recommended operating speed of the burr.
price : 1,217.00 Baht / EA
Stock Location QTY Lead time (Days) Local Thailand 1671 7 International 1664 25 -
ITEM NO : 2000741
12.7x25mm CYLINDRICAL ENDCUT CARBIDE BURR CUT-9
BRAND : YORK
PART NO : YRK2100289K
Carbide Rotary Burrs - Cylindrical-End Cutting Cylindrical-End Cutting All sizes are nominal with a 6mm shank unless other wise stated. Cut Numbers: Cut 3 - Rapid Cut. for use on softer non ferrous and plastic materials, i.e aluminium, fibreglass, plastics, hard rubber and zinc alloy, Cut 6 - Double Cut. Crosscut and double cut to improve control and chipbreaks. Manufactured from high grade tungsten carbide for general-purpose use. Cut 9 - Chipbreaker Chipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron. Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc. up to HRC65 hardness. Please note: • Work piece and tools should always be steady and well supported. • Carbide burrs are not suitable for 'milling' large amounts of material, they are for light stock removal and high revolutions 'LOW FEED - HIGH SPEED'. • Always ensure that at least 70% of the shank length is clamped by the collet or chuck of the tool being used. • Always ensure that the tool is rated to the recommended operating speed of the burr.
price : 1,350.00 Baht / EA
Stock Location QTY Lead time (Days) Local Thailand 36 7 International 36 25 -
ITEM NO : 2000740
12.7x25mm CYLINDRICAL ENDCUT CARBIDE BURR DBL CUT
BRAND : YORK
PART NO : YRK2100286K
Carbide Rotary Burrs - Cylindrical-End Cutting Cylindrical-End Cutting All sizes are nominal with a 6mm shank unless other wise stated. Cut Numbers: Cut 3 - Rapid Cut. for use on softer non ferrous and plastic materials, i.e aluminium, fibreglass, plastics, hard rubber and zinc alloy, Cut 6 - Double Cut. Crosscut and double cut to improve control and chipbreaks. Manufactured from high grade tungsten carbide for general-purpose use. Cut 9 - Chipbreaker Chipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron. Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc. up to HRC65 hardness. Please note: • Work piece and tools should always be steady and well supported. • Carbide burrs are not suitable for 'milling' large amounts of material, they are for light stock removal and high revolutions 'LOW FEED - HIGH SPEED'. • Always ensure that at least 70% of the shank length is clamped by the collet or chuck of the tool being used. • Always ensure that the tool is rated to the recommended operating speed of the burr.
price : 1,474.00 Baht / EA
Stock Location QTY Lead time (Days) Local Thailand 191 7 International 191 25 -
ITEM NO : 2000757
12.7x25mm CYLINDRICAL PLAIN END CARB' BURR DBL CUT
BRAND : YORK
PART NO : YRK2100786K
Carbide Rotary Burrs - Cylindrical Plain End Cut 6 double cut tungsten carbide rotary burrs feature a crosscut and double cut to improve control of chipbreaks. They are manufactured from high grade tungsten carbide for general-purpose use. Features and Benefits • Tungsten carbide construction for increased strength • Crosscut and double cut improves control of chipbreaks • Ideal for general purpose machining Typical Applications • Deburring • Polishing • Cast iron • Cast steel • Carbon steel • Alloy steel • Stainless steel up to HRC65 hardness. Notes • Work piece and tools should always be steady and well supported. • Carbide burrs are not suitable for 'milling' large amounts of material, they are for light stock removal and high revolutions 'LOW FEED - HIGH SPEED'. • Always ensure that at least 70% of the shank length is clamped by the collet or chuck of the tool being used. • Always ensure that the tool is rated to the recommended operating speed of the burr.
price : 1,278.00 Baht / EA
Stock Location QTY Lead time (Days) Local Thailand 549 7 International 528 25 -
ITEM NO : 2000758
12.7x25mm CYLINDRICAL PLAIN END CARBIDE BURR CUT-9
BRAND : YORK
PART NO : YRK2100789K
Cut-9 Chipbreaker Cylindrical Plain End Carbide Rotary Burrs Cut-9 chipbreaker rotary burrs are designed for fast stock removal and improved control for reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron. Features and Benefits • Solid carbide construction • Enables fast stock removal on hard materials • Allows for improved control and reduced chips Typical Applications • Deburring • Polishing • Cast iron • Cast steel • Carbon steel • Alloy steel • Stainless steel up to HRC65 hardness. Notes • Work piece and tools should always be steady and well supported. • Carbide burrs are not suitable for 'milling' large amounts of material, they are for light stock removal and high revolutions 'LOW FEED - HIGH SPEED'. • Always ensure that at least 70% of the shank length is clamped by the collet or chuck of the tool being used. • Always ensure that the tool is rated to the recommended operating speed of the burr.
price : 1,319.00 Baht / EA
Stock Location QTY Lead time (Days) Local Thailand 166 7 International 166 25 -
ITEM NO : 2000799
12.7x25mm POINTED TREE CARBIDE BURR CUT-9
BRAND : YORK
PART NO : YRK2104329K
Carbide Rotary Burrs - Pointed Tree Pointed Tree. All sizes are nominal with a 6mm shank unless other wise stated. Cut Numbers: Cut 6 - Double Cut. Crosscut and double cut to improve control and chipbreaks. Manufactured from high grade tungsten carbide for general-purpose use. Cut 9 - Chipbreaker Chipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron. Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc. up to HRC65 hardness. Please note: • Work piece and tools should always be steady and well supported. • Carbide burrs are not suitable for 'milling' large amounts of material, they are for light stock removal and high revolutions 'LOW FEED - HIGH SPEED'. • Always ensure that at least 70% of the shank length is clamped by the collet or chuck of the tool being used. • Always ensure that the tool is rated to the recommended operating speed of the burr.
price : 1,051.00 Baht / EA
Stock Location QTY Lead time (Days) Local Thailand 138 7 International 138 25 -
ITEM NO : 2000798
12.7x25mm POINTED TREE CARBIDE BURR DBL CUT
BRAND : YORK
PART NO : YRK2104326K
Carbide Rotary Burrs - Pointed Tree Pointed Tree. All sizes are nominal with a 6mm shank unless other wise stated. Cut Numbers: Cut 6 - Double Cut. Crosscut and double cut to improve control and chipbreaks. Manufactured from high grade tungsten carbide for general-purpose use. Cut 9 - Chipbreaker Chipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron. Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc. up to HRC65 hardness. Please note: • Work piece and tools should always be steady and well supported. • Carbide burrs are not suitable for 'milling' large amounts of material, they are for light stock removal and high revolutions 'LOW FEED - HIGH SPEED'. • Always ensure that at least 70% of the shank length is clamped by the collet or chuck of the tool being used. • Always ensure that the tool is rated to the recommended operating speed of the burr.
price : 1,191.00 Baht / EA
Stock Location QTY Lead time (Days) Local Thailand 34 7 International 34 25 -
ITEM NO : 2000789
12.7x25mm ROUND TREE CARBIDE BURR CUT-9
BRAND : YORK
PART NO : YRK2103329K
Carbide Rotary Burr - Round Tree Round Tree. All sizes are nominal with a 6mm shank unless other wise stated. Cut Numbers: Cut 6 - Double Cut. Crosscut and double cut to improve control and chipbreaks. Manufactured from high grade tungsten carbide for general-purpose use. Cut 9 - Chipbreaker Chipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron. Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc. up to HRC65 hardness. Please note: • Work piece and tools should always be steady and well supported. • Carbide burrs are not suitable for 'milling' large amounts of material, they are for light stock removal and high revolutions 'LOW FEED - HIGH SPEED'. • Always ensure that at least 70% of the shank length is clamped by the collet or chuck of the tool being used. • Always ensure that the tool is rated to the recommended operating speed of the burr.
price : 1,032.00 Baht / EA
Stock Location QTY Lead time (Days) Local Thailand 76 7 International 76 25 -
ITEM NO : 2000788
12.7x25mm ROUND TREE CARBIDE BURR DBL CUT
BRAND : YORK
PART NO : YRK2103326K
Carbide Rotary Burr - Round Tree Round Tree. All sizes are nominal with a 6mm shank unless other wise stated. Cut Numbers: Cut 6 - Double Cut. Crosscut and double cut to improve control and chipbreaks. Manufactured from high grade tungsten carbide for general-purpose use. Cut 9 - Chipbreaker Chipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron. Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc. up to HRC65 hardness. Please note: • Work piece and tools should always be steady and well supported. • Carbide burrs are not suitable for 'milling' large amounts of material, they are for light stock removal and high revolutions 'LOW FEED - HIGH SPEED'. • Always ensure that at least 70% of the shank length is clamped by the collet or chuck of the tool being used. • Always ensure that the tool is rated to the recommended operating speed of the burr.
price : 1,032.00 Baht / EA
Stock Location QTY Lead time (Days) Local Thailand 1259 7 International 1259 25 -
ITEM NO : 2000843
12.7x28mm CONICAL 14 DEGCARBIDE BURR DBL CUT
BRAND : YORK
PART NO : YRK2108326K
Carbide Rotary Burrs - Conical 14° Conical 14°. All sizes are nominal with a 6mm shank unless other wise stated. Cut Numbers: Cut 6 - Double Cut. Crosscut and double cut to improve control and chipbreaks. Manufactured from high grade tungsten carbide for general-purpose use. Cut 9 - Chipbreaker Chipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron. Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc. up to HRC65 hardness. Please note: • Work piece and tools should always be steady and well supported. • Carbide burrs are not suitable for 'milling' large amounts of material, they are for light stock removal and high revolutions 'LOW FEED - HIGH SPEED'. • Always ensure that at least 70% of the shank length is clamped by the collet or chuck of the tool being used. • Always ensure that the tool is rated to the recommended operating speed of the burr.
price : 1,271.00 Baht / EA
Stock Location QTY Lead time (Days) Local Thailand 225 7 International 225 25 -
ITEM NO : 2000844
12.7x28mm CONICAL 14DEG CARBIDE BURR CUT-9
BRAND : YORK
PART NO : YRK2108329K
Carbide Rotary Burrs - Conical 14° Conical 14°. All sizes are nominal with a 6mm shank unless other wise stated. Cut Numbers: Cut 6 - Double Cut. Crosscut and double cut to improve control and chipbreaks. Manufactured from high grade tungsten carbide for general-purpose use. Cut 9 - Chipbreaker Chipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron. Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc. up to HRC65 hardness. Please note: • Work piece and tools should always be steady and well supported. • Carbide burrs are not suitable for 'milling' large amounts of material, they are for light stock removal and high revolutions 'LOW FEED - HIGH SPEED'. • Always ensure that at least 70% of the shank length is clamped by the collet or chuck of the tool being used. • Always ensure that the tool is rated to the recommended operating speed of the burr.
price : 1,413.00 Baht / EA
Stock Location QTY Lead time (Days) Local Thailand 364 7 International 364 25 -
ITEM NO : 2000780
12.7x32mm FLAME SHAPE CARBIDE BURR CUT-9
BRAND : YORK
PART NO : YRK2102329K
Carbide Rotary Burrs - Flame Shape Flame Shape. All sizes are nominal with a 6mm shank unless other wise stated. Cut Numbers: Cut 6 - Double Cut. Crosscut and double cut to improve control and chipbreaks. Manufactured from high grade tungsten carbide for general-purpose use. Cut 9 - Chipbreaker Chipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron. Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc. up to HRC65 hardness. Please note: • Work piece and tools should always be steady and well supported. • Carbide burrs are not suitable for 'milling' large amounts of material, they are for light stock removal and high revolutions 'LOW FEED - HIGH SPEED'. • Always ensure that at least 70% of the shank length is clamped by the collet or chuck of the tool being used. • Always ensure that the tool is rated to the recommended operating speed of the burr.
price : 1,284.00 Baht / EA
Stock Location QTY Lead time (Days) Local Thailand 280 7 International 280 25 -
ITEM NO : 2000779
12.7x32mm FLAME SHAPE CARBIDE BURR DBL CUT
BRAND : YORK
PART NO : YRK2102326K
Carbide Rotary Burrs - Flame Shape Flame Shape. All sizes are nominal with a 6mm shank unless other wise stated. Cut Numbers: Cut 6 - Double Cut. Crosscut and double cut to improve control and chipbreaks. Manufactured from high grade tungsten carbide for general-purpose use. Cut 9 - Chipbreaker Chipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron. Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc. up to HRC65 hardness. Please note: • Work piece and tools should always be steady and well supported. • Carbide burrs are not suitable for 'milling' large amounts of material, they are for light stock removal and high revolutions 'LOW FEED - HIGH SPEED'. • Always ensure that at least 70% of the shank length is clamped by the collet or chuck of the tool being used. • Always ensure that the tool is rated to the recommended operating speed of the burr.
price : 1,284.00 Baht / EA
Stock Location QTY Lead time (Days) Local Thailand 879 7 International 879 25 -
ITEM NO : 2000851
12.7x6.3mm CONICAL 90DEGCARBIDE BURR CUT-9
BRAND : YORK
PART NO : YRK2108959K
Carbide Rotary Burrs - Conical 90° Inc. Angle Conical 90° Inc. Angle. All sizes are nominal with a 6mm shank unless other wise stated. Cut Numbers: Cut 6 - Double Cut. Crosscut and double cut to improve control and chipbreaks. Manufactured from high grade tungsten carbide for general-purpose use. Cut 9 - Chipbreaker Chipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron. Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc. up to HRC65 hardness. Please note: • Work piece and tools should always be steady and well supported. • Carbide burrs are not suitable for 'milling' large amounts of material, they are for light stock removal and high revolutions 'LOW FEED - HIGH SPEED'. • Always ensure that at least 70% of the shank length is clamped by the collet or chuck of the tool being used. • Always ensure that the tool is rated to the recommended operating speed of the burr.
price : 1,148.00 Baht / EA
Stock Location QTY Lead time (Days) Local Thailand 466 7 International 466 25 -
ITEM NO : 2000703
12x12mm BALL SHAPE CARBIDE BURR CUT 9
BRAND : KENNEDY
PART NO : KEN2106320K
Carbide Burrs - Ball Shape Ball Shape All sizes are nominal. Sizes marked * are 3mm shank, all others are 6mm shank. Cut Numbers: Cut 3 - Rapid Cut For use on softer non-ferrous and plastic materials, i.e. aluminium, fibreglass, plastics, hard rubber and zinc alloy. Cut 9 - Chipbreaker Chipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron.
price : 1,062.00 Baht / EA
Stock Location QTY Lead time (Days) Local Thailand 18 7 International 18 25 -
ITEM NO : 2000649
12x20mm CYL. CARBIDE ENDCUT BURR CUT 9
BRAND : KENNEDY
PART NO : KEN2100280K
Carbide Burrs - Cylindrical-End Cutting Cylindrical-End Cutting. All sizes are nominal. Sizes marked * are 3mm shank, all others are 6mm shank. Cut Numbers: Cut 3 - Rapid Cut For use on softer non-ferrous and plastic materials, i.e. aluminium, fibreglass, plastics, hard rubber and zinc alloy. Cut 9 - Chipbreaker Chipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron. Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc. up to HRC65 hardness. Please note: Workpiece and tools should always be steady and well supported. Carbide burrs are not suitable for 'milling' large amounts of material, they are for light stock removal at high rpm's 'LOW FEED - HIGH SPEED'. Always ensure that at least 70% of the shank length is clamped by the collet or chuck of the tool being used. Always ensure that the tool is rated to the recommended operating speed of the burr.
price : 1,136.00 Baht / EA
Stock Location QTY Lead time (Days) Local Thailand 7 7 International 7 25 -
ITEM NO : 2000659
12x20mm CYL. CARBIDE PLAIN END BURR CUT 9
BRAND : KENNEDY
PART NO : KEN2100780K
Carbide Burrs - Cylindrical Plain End Cylindrical Plain End. All sizes are nominal. Sizes marked * are 3mm shank, all others are 6mm shank. Cut Numbers: Cut 3 - Rapid Cut For use on softer non-ferrous and plastic materials, i.e. aluminium, fibreglass, plastics, hard rubber and zinc alloy. Cut 9 - Chipbreaker Chipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron. Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc. up to HRC65 hardness. Please note: Workpiece and tools should always be steady and well supported. Carbide burrs are not suitable for 'milling' large amounts of material, they are for light stock removal at high rpm's 'LOW FEED - HIGH SPEED'. Always ensure that at least 70% of the shank length is clamped by the collet or chuck of the tool being used. Always ensure that the tool is rated to the recommended operating speed of the burr.
price : 1,113.00 Baht / EA
Stock Location QTY Lead time (Days) Local Thailand 132 7 International 132 25 -
ITEM NO : 2000694
12x20mm OVAL SHAPE CARBIDE BURR CUT 9
BRAND : KENNEDY
PART NO : KEN2105240K
Carbide Burrs - Oval Shape Oval Shape. All sizes are nominal. Sizes marked * are 3mm shank, all others are 6mm shank. Cut Numbers: Cut 3 - Rapid Cut For use on softer non-ferrous and plastic materials, i.e. aluminium, fibreglass, plastics, hard rubber and zinc alloy. Cut 9 - Chipbreaker Chipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron. Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc. up to HRC65 hardness. Please note: Workpiece and tools should always be steady and well supported. Carbide burrs are not suitable for 'milling' large amounts of material, they are for light stock removal at high rpm's 'LOW FEED - HIGH SPEED'. Always ensure that at least 70% of the shank length is clamped by the collet or chuck of the tool being used. Always ensure that the tool is rated to the recommended operating speed of the burr.
price : 1,136.00 Baht / EA
Stock Location QTY Lead time (Days) Local Thailand 20 7 International 20 25 -
ITEM NO : 2000688
12x20mm POINTED TREE CARBIDE BURR CUT 9
BRAND : KENNEDY
PART NO : KEN2104280K
Carbide Burrs - Pointed Tree Pointed Tree. All sizes are nominal. Sizes marked * are 3mm shank, all others are 6mm shank. Cut Numbers: Cut 9 - Chipbreaker Chipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron.
price : 1,022.00 Baht / EA
Stock Location QTY Lead time (Days) Local Thailand 12 7 International 12 25 -
ITEM NO : 2000709
12x25mm CONICAL SHAPE CARBIDE BURR CUT 9
BRAND : KENNEDY
PART NO : KEN2107320K
Carbide Burrs - Conical Conical. All sizes are nominal. Sizes marked * are 3mm shank, all others are 6mm shank. Cut Numbers: Cut 9 - Chipbreaker Chipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron. Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc. up to HRC65 hardness. Please note: Workpiece and tools should always be steady and well supported. Carbide burrs are not suitable for 'milling' large amounts of material, they are for light stock removal at high rpm's 'LOW FEED - HIGH SPEED'. Always ensure that at least 70% of the shank length is clamped by the collet or chuck of the tool being used. Always ensure that the tool is rated to the recommended operating speed of the burr.
price : 1,136.00 Baht / EA
Stock Location QTY Lead time (Days) Local Thailand 60 7 International 60 25
recent products
-
ITEM NO : 3050391
Sling Wire Mesh L6Ft Dia 3In VLL4800Lb
BRAND : LIFT-ALL
PART NO : 4T110X6
Wire Mesh Sling Sling Type Triangle and Choker - Type 1 Sling Length 6 ft. Sling Width 4 In. Vertical Hitch Capacity 4800 lb. Choker Hitch Capacity 4800 lb. Basket Hitch Capacity 9600 lb. Length of Sling Leg 4.8 ft. Sling Material Galvanized High Tensile Steel Terminal Thickness 1/2 In. Terminal Dia 3 In. Wire Gauge 10
price : 23,619.00 Baht / EA
