Categories 4
Product Result
-
ITEM NO : 2000769
10mmx19mm CYLINDRICAL BALL NOSED CARB' BURR DBL CU
BRAND : YORK
PART NO : YRK2101246K
Carbide Rotary Burrs - Cylindrical Ball Nosed Cylindrical Ball Nosed. All sizes are nominal with a 6mm shank unless other wise stated. Cut Numbers: Cut 3 - Rapid Cut. for use on softer non ferrous and plastic materials, i.e aluminium, fibreglass, plastics, hard rubber and zinc alloy, Cut 6 - Double Cut. Crosscut and double cut to improve control and chipbreaks. Manufactured from high grade tungsten carbide for general-purpose use. Cut 9 - Chipbreaker Chipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron. Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc. up to HRC65 hardness. Please note: • Work piece and tools should always be steady and well supported. • Carbide burrs are not suitable for 'milling' large amounts of material, they are for light stock removal and high revolutions 'LOW FEED - HIGH SPEED'. • Always ensure that at least 70% of the shank length is clamped by the collet or chuck of the tool being used. • Always ensure that the tool is rated to the recommended operating speed of the burr.
price : 936.00 Baht / EA
Stock Location QTY Lead time (Days) Local Thailand 833 7 International 847 25 -
ITEM NO : 2000739
10mmx19mm CYLINDRICAL ENDCUT CARBIDE BURR CUT-9
BRAND : YORK
PART NO : YRK2100249K
Carbide Rotary Burrs - Cylindrical-End Cutting Cylindrical-End Cutting All sizes are nominal with a 6mm shank unless other wise stated. Cut Numbers: Cut 3 - Rapid Cut. for use on softer non ferrous and plastic materials, i.e aluminium, fibreglass, plastics, hard rubber and zinc alloy, Cut 6 - Double Cut. Crosscut and double cut to improve control and chipbreaks. Manufactured from high grade tungsten carbide for general-purpose use. Cut 9 - Chipbreaker Chipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron. Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc. up to HRC65 hardness. Please note: • Work piece and tools should always be steady and well supported. • Carbide burrs are not suitable for 'milling' large amounts of material, they are for light stock removal and high revolutions 'LOW FEED - HIGH SPEED'. • Always ensure that at least 70% of the shank length is clamped by the collet or chuck of the tool being used. • Always ensure that the tool is rated to the recommended operating speed of the burr.
price : 1,000.00 Baht / EA
Stock Location QTY Lead time (Days) Local Thailand 598 7 International 598 25 -
ITEM NO : 2000738
10mmx19mm CYLINDRICAL ENDCUT CARBIDE BURR DBL CUT
BRAND : YORK
PART NO : YRK2100246K
Carbide Rotary Burrs - Cylindrical-End Cutting Cylindrical-End Cutting All sizes are nominal with a 6mm shank unless other wise stated. Cut Numbers: Cut 3 - Rapid Cut. for use on softer non ferrous and plastic materials, i.e aluminium, fibreglass, plastics, hard rubber and zinc alloy, Cut 6 - Double Cut. Crosscut and double cut to improve control and chipbreaks. Manufactured from high grade tungsten carbide for general-purpose use. Cut 9 - Chipbreaker Chipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron. Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc. up to HRC65 hardness. Please note: • Work piece and tools should always be steady and well supported. • Carbide burrs are not suitable for 'milling' large amounts of material, they are for light stock removal and high revolutions 'LOW FEED - HIGH SPEED'. • Always ensure that at least 70% of the shank length is clamped by the collet or chuck of the tool being used. • Always ensure that the tool is rated to the recommended operating speed of the burr.
price : 866.00 Baht / EA
Stock Location QTY Lead time (Days) Local Thailand 130 7 International 129 25 -
ITEM NO : 2000755
10mmx19mm CYLINDRICAL PLAIN END CARB' BURR DBL CUT
BRAND : YORK
PART NO : YRK2100746K
Carbide Rotary Burrs - Cylindrical Plain End Cut 6 double cut tungsten carbide rotary burrs feature a crosscut and double cut to improve control of chipbreaks. They are manufactured from high grade tungsten carbide for general-purpose use. Features and Benefits • Tungsten carbide construction for increased strength • Crosscut and double cut improves control of chipbreaks • Ideal for general purpose machining Typical Applications • Deburring • Polishing • Cast iron • Cast steel • Carbon steel • Alloy steel • Stainless steel up to HRC65 hardness. Notes • Work piece and tools should always be steady and well supported. • Carbide burrs are not suitable for 'milling' large amounts of material, they are for light stock removal and high revolutions 'LOW FEED - HIGH SPEED'. • Always ensure that at least 70% of the shank length is clamped by the collet or chuck of the tool being used. • Always ensure that the tool is rated to the recommended operating speed of the burr.
price : 949.00 Baht / EA
Stock Location QTY Lead time (Days) Local Thailand 415 7 International 409 25 -
ITEM NO : 2000787
10mmx19mm ROUND TREE CARBIDE BURR CUT-9
BRAND : YORK
PART NO : YRK2103249K
Carbide Rotary Burr - Round Tree Round Tree. All sizes are nominal with a 6mm shank unless other wise stated. Cut Numbers: Cut 6 - Double Cut. Crosscut and double cut to improve control and chipbreaks. Manufactured from high grade tungsten carbide for general-purpose use. Cut 9 - Chipbreaker Chipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron. Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc. up to HRC65 hardness. Please note: • Work piece and tools should always be steady and well supported. • Carbide burrs are not suitable for 'milling' large amounts of material, they are for light stock removal and high revolutions 'LOW FEED - HIGH SPEED'. • Always ensure that at least 70% of the shank length is clamped by the collet or chuck of the tool being used. • Always ensure that the tool is rated to the recommended operating speed of the burr.
price : 801.00 Baht / EA
Stock Location QTY Lead time (Days) Local Thailand 852 7 International 852 25 -
ITEM NO : 2000786
10mmx19mm ROUND TREE CARBIDE BURR DBL CUT
BRAND : YORK
PART NO : YRK2103246K
Carbide Rotary Burr - Round Tree Round Tree. All sizes are nominal with a 6mm shank unless other wise stated. Cut Numbers: Cut 6 - Double Cut. Crosscut and double cut to improve control and chipbreaks. Manufactured from high grade tungsten carbide for general-purpose use. Cut 9 - Chipbreaker Chipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron. Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc. up to HRC65 hardness. Please note: • Work piece and tools should always be steady and well supported. • Carbide burrs are not suitable for 'milling' large amounts of material, they are for light stock removal and high revolutions 'LOW FEED - HIGH SPEED'. • Always ensure that at least 70% of the shank length is clamped by the collet or chuck of the tool being used. • Always ensure that the tool is rated to the recommended operating speed of the burr.
price : 801.00 Baht / EA
Stock Location QTY Lead time (Days) Local Thailand 468 7 International 468 25 -
ITEM NO : 2000701
10x10mm BALL SHAPE CARBIDE BURR CUT 3
BRAND : KENNEDY
PART NO : KEN2106220K
Carbide Burrs - Ball Shape Ball Shape All sizes are nominal. Sizes marked * are 3mm shank, all others are 6mm shank. Cut Numbers: Cut 3 - Rapid Cut For use on softer non-ferrous and plastic materials, i.e. aluminium, fibreglass, plastics, hard rubber and zinc alloy. Cut 9 - Chipbreaker Chipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron.
price : 1,041.00 Baht / EA
Stock Location QTY Lead time (Days) Local Thailand 108 7 International 108 25 -
ITEM NO : 2000702
10x10mm BALL SHAPE CARBIDE BURR CUT 9
BRAND : KENNEDY
PART NO : KEN2106240K
Carbide Burrs - Ball Shape Ball Shape All sizes are nominal. Sizes marked * are 3mm shank, all others are 6mm shank. Cut Numbers: Cut 3 - Rapid Cut For use on softer non-ferrous and plastic materials, i.e. aluminium, fibreglass, plastics, hard rubber and zinc alloy. Cut 9 - Chipbreaker Chipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron.
price : 781.00 Baht / EA
Stock Location QTY Lead time (Days) Local Thailand 1 7 International 1 25 -
ITEM NO : 2000693
10x15mm OVAL SHAPE CARBIDE BURR CUT 9
BRAND : KENNEDY
PART NO : KEN2105200K
Carbide Burrs - Oval Shape Oval Shape. All sizes are nominal. Sizes marked * are 3mm shank, all others are 6mm shank. Cut Numbers: Cut 3 - Rapid Cut For use on softer non-ferrous and plastic materials, i.e. aluminium, fibreglass, plastics, hard rubber and zinc alloy. Cut 9 - Chipbreaker Chipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron. Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc. up to HRC65 hardness. Please note: Workpiece and tools should always be steady and well supported. Carbide burrs are not suitable for 'milling' large amounts of material, they are for light stock removal at high rpm's 'LOW FEED - HIGH SPEED'. Always ensure that at least 70% of the shank length is clamped by the collet or chuck of the tool being used. Always ensure that the tool is rated to the recommended operating speed of the burr.
price : 781.00 Baht / EA
Stock Location QTY Lead time (Days) Local Thailand 306 7 International 306 25 -
ITEM NO : 2000708
10x20mm CONICAL SHAPE CARBIDE BURR CUT 9
BRAND : KENNEDY
PART NO : KEN2107240K
Carbide Burrs - Conical Conical. All sizes are nominal. Sizes marked * are 3mm shank, all others are 6mm shank. Cut Numbers: Cut 9 - Chipbreaker Chipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron. Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc. up to HRC65 hardness. Please note: Workpiece and tools should always be steady and well supported. Carbide burrs are not suitable for 'milling' large amounts of material, they are for light stock removal at high rpm's 'LOW FEED - HIGH SPEED'. Always ensure that at least 70% of the shank length is clamped by the collet or chuck of the tool being used. Always ensure that the tool is rated to the recommended operating speed of the burr.
price : 956.00 Baht / EA
Stock Location QTY Lead time (Days) Local Thailand 158 7 International 158 25 -
ITEM NO : 2000668
10x20mm CYL. CARBIDE BALLNOSE BURR CUT 3
BRAND : KENNEDY
PART NO : KEN2101220K
Carbide Burrs - Cylindrical Ball Nosed Cylindrical Ball Nosed All sizes are nominal. Sizes marked * are 3mm shank, all others are 6mm shank. Cut Numbers: Cut 3 - Rapid Cut For use on softer non-ferrous and plastic materials, i.e. aluminium, fibreglass, plastics, hard rubber and zinc alloy. Cut 9 - Chipbreaker Chipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron. Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc. up to HRC65 hardness. Please note: Workpiece and tools should always be steady and well supported. Carbide burrs are not suitable for 'milling' large amounts of material, they are for light stock removal at high rpm's 'LOW FEED - HIGH SPEED'. Always ensure that at least 70% of the shank length is clamped by the collet or chuck of the tool being used. Always ensure that the tool is rated to the recommended operating speed of the burr.
price : 1,350.00 Baht / EA
Stock Location QTY Lead time (Days) Local Thailand 2 7 International 2 25 -
ITEM NO : 2000669
10x20mm CYL. CARBIDE BALLNOSE BURR CUT 9
BRAND : KENNEDY
PART NO : KEN2101240K
Carbide Burrs - Cylindrical Ball Nosed Cylindrical Ball Nosed All sizes are nominal. Sizes marked * are 3mm shank, all others are 6mm shank. Cut Numbers: Cut 3 - Rapid Cut For use on softer non-ferrous and plastic materials, i.e. aluminium, fibreglass, plastics, hard rubber and zinc alloy. Cut 9 - Chipbreaker Chipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron. Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc. up to HRC65 hardness. Please note: Workpiece and tools should always be steady and well supported. Carbide burrs are not suitable for 'milling' large amounts of material, they are for light stock removal at high rpm's 'LOW FEED - HIGH SPEED'. Always ensure that at least 70% of the shank length is clamped by the collet or chuck of the tool being used. Always ensure that the tool is rated to the recommended operating speed of the burr.
price : 1,013.00 Baht / EA
Stock Location QTY Lead time (Days) Local Thailand 3113 7 International 3113 25 -
ITEM NO : 2000647
10x20mm CYL. CARBIDE ENDCUT BURR CUT 3
BRAND : KENNEDY
PART NO : KEN2100220K
Carbide Burrs - Cylindrical-End Cutting Cylindrical-End Cutting. All sizes are nominal. Sizes marked * are 3mm shank, all others are 6mm shank. Cut Numbers: Cut 3 - Rapid Cut For use on softer non-ferrous and plastic materials, i.e. aluminium, fibreglass, plastics, hard rubber and zinc alloy. Cut 9 - Chipbreaker Chipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron. Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc. up to HRC65 hardness. Please note: Workpiece and tools should always be steady and well supported. Carbide burrs are not suitable for 'milling' large amounts of material, they are for light stock removal at high rpm's 'LOW FEED - HIGH SPEED'. Always ensure that at least 70% of the shank length is clamped by the collet or chuck of the tool being used. Always ensure that the tool is rated to the recommended operating speed of the burr.
price : 1,554.00 Baht / EA
Stock Location QTY Lead time (Days) Local Thailand 82 7 International 82 25 -
ITEM NO : 2000648
10x20mm CYL. CARBIDE ENDCUT BURR CUT 9
BRAND : KENNEDY
PART NO : KEN2100240K
Carbide Burrs - Cylindrical-End Cutting Cylindrical-End Cutting. All sizes are nominal. Sizes marked * are 3mm shank, all others are 6mm shank. Cut Numbers: Cut 3 - Rapid Cut For use on softer non-ferrous and plastic materials, i.e. aluminium, fibreglass, plastics, hard rubber and zinc alloy. Cut 9 - Chipbreaker Chipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron. Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc. up to HRC65 hardness. Please note: Workpiece and tools should always be steady and well supported. Carbide burrs are not suitable for 'milling' large amounts of material, they are for light stock removal at high rpm's 'LOW FEED - HIGH SPEED'. Always ensure that at least 70% of the shank length is clamped by the collet or chuck of the tool being used. Always ensure that the tool is rated to the recommended operating speed of the burr.
price : 843.00 Baht / EA
Stock Location QTY Lead time (Days) Local Thailand 271 7 International 271 25 -
ITEM NO : 2000658
10x20mm CYL. CARBIDE PLAIN END BURR CUT 9
BRAND : KENNEDY
PART NO : KEN2100740K
Carbide Burrs - Cylindrical Plain End Cylindrical Plain End. All sizes are nominal. Sizes marked * are 3mm shank, all others are 6mm shank. Cut Numbers: Cut 3 - Rapid Cut For use on softer non-ferrous and plastic materials, i.e. aluminium, fibreglass, plastics, hard rubber and zinc alloy. Cut 9 - Chipbreaker Chipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron. Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc. up to HRC65 hardness. Please note: Workpiece and tools should always be steady and well supported. Carbide burrs are not suitable for 'milling' large amounts of material, they are for light stock removal at high rpm's 'LOW FEED - HIGH SPEED'. Always ensure that at least 70% of the shank length is clamped by the collet or chuck of the tool being used. Always ensure that the tool is rated to the recommended operating speed of the burr.
price : 877.00 Baht / EA
Stock Location QTY Lead time (Days) Local Thailand 8 7 International 8 25 -
ITEM NO : 2000687
10x20mm POINTED TREE CARBIDE BURR CUT 9
BRAND : KENNEDY
PART NO : KEN2104240K
Carbide Burrs - Pointed Tree Pointed Tree. All sizes are nominal. Sizes marked * are 3mm shank, all others are 6mm shank. Cut Numbers: Cut 9 - Chipbreaker Chipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron.
price : 1,006.00 Baht / EA
Stock Location QTY Lead time (Days) Local Thailand 9 7 International 9 25 -
ITEM NO : 2000679
10x20mm ROUND TREE CARBIDE BURR CUT 3
BRAND : KENNEDY
PART NO : KEN2103220K
Carbide Burrs - Round Tree Round Tree All sizes are nominal. Sizes marked * are 3mm shank, all others are 6mm shank. Cut Numbers: Cut 3 - Rapid Cut For use on softer non-ferrous and plastic materials, i.e. aluminium, fibreglass, plastics, hard rubber and zinc alloy. Cut 9 - Chipbreaker Chipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron. Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc. up to HRC65 hardness. Please note: Workpiece and tools should always be steady and well supported. Carbide burrs are not suitable for 'milling' large amounts of material, they are for light stock removal at high rpm's 'LOW FEED - HIGH SPEED'. Always ensure that at least 70% of the shank length is clamped by the collet or chuck of the tool being used. Always ensure that the tool is rated to the recommended operating speed of the burr.
price : 1,752.00 Baht / EA
Stock Location QTY Lead time (Days) Local Thailand 530 7 International 530 25 -
ITEM NO : 2000680
10x20mm ROUND TREE CARBIDE BURR CUT 9
BRAND : KENNEDY
PART NO : KEN2103240K
Carbide Burrs - Round Tree Round Tree All sizes are nominal. Sizes marked * are 3mm shank, all others are 6mm shank. Cut Numbers: Cut 3 - Rapid Cut For use on softer non-ferrous and plastic materials, i.e. aluminium, fibreglass, plastics, hard rubber and zinc alloy. Cut 9 - Chipbreaker Chipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron. Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc. up to HRC65 hardness. Please note: Workpiece and tools should always be steady and well supported. Carbide burrs are not suitable for 'milling' large amounts of material, they are for light stock removal at high rpm's 'LOW FEED - HIGH SPEED'. Always ensure that at least 70% of the shank length is clamped by the collet or chuck of the tool being used. Always ensure that the tool is rated to the recommended operating speed of the burr.
price : 997.00 Baht / EA
Stock Location QTY Lead time (Days) Local Thailand 572 7 International 512 25 -
ITEM NO : 2000714
10x26mm CONICAL 14DEG. CARBIDE BURR CUT 3
BRAND : KENNEDY
PART NO : KEN2108220K
Carbide Burrs - Conical 14° Conical 14°. All sizes are nominal. Sizes marked * are 3mm shank, all others are 6mm shank. Cut Numbers: Cut 3 - Rapid Cut For use on softer non-ferrous and plastic materials, i.e. aluminium, fibreglass, plastics, hard rubber and zinc alloy. Cut 9 - Chipbreaker Chipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron. Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc. up to HRC65 hardness. Please note: Workpiece and tools should always be steady and well supported. Carbide burrs are not suitable for 'milling' large amounts of material, they are for light stock removal at high rpm's 'LOW FEED - HIGH SPEED'. Always ensure that at least 70% of the shank length is clamped by the collet or chuck of the tool being used. Always ensure that the tool is rated to the recommended operating speed of the burr.
price : 1,674.00 Baht / EA
Stock Location QTY Lead time (Days) Local Thailand 15 7 International 15 25 -
ITEM NO : 2000722
10x4mm CONICAL 90DEG. CARBIDE BURR CUT 9
BRAND : KENNEDY
PART NO : KEN2108930K
Carbide Burrs - Conical 90° Conical 90° Inc. Angle. All sizes are nominal. Sizes marked * are 3mm shank, all others are 6mm shank. Cut Numbers: Cut 9 - Chipbreaker Chipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron. Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc. up to HRC65 hardness. Please note: Workpiece and tools should always be steady and well supported. Carbide burrs are not suitable for 'milling' large amounts of material, they are for light stock removal at high rpm's 'LOW FEED - HIGH SPEED'. Always ensure that at least 70% of the shank length is clamped by the collet or chuck of the tool being used. Always ensure that the tool is rated to the recommended operating speed of the burr.
price : 799.00 Baht / EA
Stock Location QTY Lead time (Days) Local Thailand 58 7 International 58 25 -
ITEM NO : 2000772
11x25mm CYLINDRICAL BALLNOSE CARBIDE BURR CUT-9
BRAND : YORK
PART NO : YRK2101329K
Carbide Rotary Burrs - Cylindrical Ball Nosed Cylindrical Ball Nosed. All sizes are nominal with a 6mm shank unless other wise stated. Cut Numbers: Cut 3 - Rapid Cut. for use on softer non ferrous and plastic materials, i.e aluminium, fibreglass, plastics, hard rubber and zinc alloy, Cut 6 - Double Cut. Crosscut and double cut to improve control and chipbreaks. Manufactured from high grade tungsten carbide for general-purpose use. Cut 9 - Chipbreaker Chipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron. Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc. up to HRC65 hardness. Please note: • Work piece and tools should always be steady and well supported. • Carbide burrs are not suitable for 'milling' large amounts of material, they are for light stock removal and high revolutions 'LOW FEED - HIGH SPEED'. • Always ensure that at least 70% of the shank length is clamped by the collet or chuck of the tool being used. • Always ensure that the tool is rated to the recommended operating speed of the burr.
price : 1,217.00 Baht / EA
Stock Location QTY Lead time (Days) Local Thailand 354 7 International 354 25 -
ITEM NO : 2000819
11x9.5mm BALL SHAPE CARBIDE BURR CUT-9
BRAND : YORK
PART NO : YRK2106249K
Carbide Rotary Burrs - Ball Shape Ball Shape. All sizes are nominal with a 6mm shank unless other wise stated. Cut Numbers: Cut 6 - Double Cut. Crosscut and double cut to improve control and chipbreaks. Manufactured from high grade tungsten carbide for general-purpose use. Cut 9 - Chipbreaker Chipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron. Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc. up to HRC65 hardness. Please note: • Work piece and tools should always be steady and well supported. • Carbide burrs are not suitable for 'milling' large amounts of material, they are for light stock removal and high revolutions 'LOW FEED - HIGH SPEED'. • Always ensure that at least 70% of the shank length is clamped by the collet or chuck of the tool being used. • Always ensure that the tool is rated to the recommended operating speed of the burr.
price : 1,005.00 Baht / EA
Stock Location QTY Lead time (Days) Local Thailand 162 7 International 161 25 -
ITEM NO : 2000818
11x9.5mm BALL SHAPE CARBIDE BURR DBL CUT
BRAND : YORK
PART NO : YRK2106246K
Carbide Rotary Burrs - Ball Shape Ball Shape. All sizes are nominal with a 6mm shank unless other wise stated. Cut Numbers: Cut 6 - Double Cut. Crosscut and double cut to improve control and chipbreaks. Manufactured from high grade tungsten carbide for general-purpose use. Cut 9 - Chipbreaker Chipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron. Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc. up to HRC65 hardness. Please note: • Work piece and tools should always be steady and well supported. • Carbide burrs are not suitable for 'milling' large amounts of material, they are for light stock removal and high revolutions 'LOW FEED - HIGH SPEED'. • Always ensure that at least 70% of the shank length is clamped by the collet or chuck of the tool being used. • Always ensure that the tool is rated to the recommended operating speed of the burr.
price : 804.00 Baht / EA
Stock Location QTY Lead time (Days) Local Thailand 300 7 International 300 25 -
ITEM NO : 2000821
12.7x11mm BALL SHAPE CARBIDE BURR CUT-9
BRAND : YORK
PART NO : YRK2106329K
Carbide Rotary Burrs - Ball Shape Ball Shape. All sizes are nominal with a 6mm shank unless other wise stated. Cut Numbers: Cut 6 - Double Cut. Crosscut and double cut to improve control and chipbreaks. Manufactured from high grade tungsten carbide for general-purpose use. Cut 9 - Chipbreaker Chipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron. Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc. up to HRC65 hardness. Please note: • Work piece and tools should always be steady and well supported. • Carbide burrs are not suitable for 'milling' large amounts of material, they are for light stock removal and high revolutions 'LOW FEED - HIGH SPEED'. • Always ensure that at least 70% of the shank length is clamped by the collet or chuck of the tool being used. • Always ensure that the tool is rated to the recommended operating speed of the burr.
price : 1,206.00 Baht / EA
Stock Location QTY Lead time (Days) Local Thailand 14 7 International 14 25 -
ITEM NO : 2000820
12.7x11mm BALL SHAPE CARBIDE BURR DBL CUT
BRAND : YORK
PART NO : YRK2106326K
Carbide Rotary Burrs - Ball Shape Ball Shape. All sizes are nominal with a 6mm shank unless other wise stated. Cut Numbers: Cut 6 - Double Cut. Crosscut and double cut to improve control and chipbreaks. Manufactured from high grade tungsten carbide for general-purpose use. Cut 9 - Chipbreaker Chipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron. Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc. up to HRC65 hardness. Please note: • Work piece and tools should always be steady and well supported. • Carbide burrs are not suitable for 'milling' large amounts of material, they are for light stock removal and high revolutions 'LOW FEED - HIGH SPEED'. • Always ensure that at least 70% of the shank length is clamped by the collet or chuck of the tool being used. • Always ensure that the tool is rated to the recommended operating speed of the burr.
price : 904.00 Baht / EA
Stock Location QTY Lead time (Days) Local Thailand 2 7 International 2 25 -
ITEM NO : 2000871
12.7x12.7mm INVERTED CONEC/B BURR CUT 9
BRAND : YORK
PART NO : YRK2109329K
Carbide Rotary Burrs - Inverted Cone Inverted Cone. All sizes are nominal with a 6mm shank unless other wise stated. Cut 9 - Chipbreaker Chipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron. Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc. up to HRC65 hardness. Please note: • Work piece and tools should always be steady and well supported. • Carbide burrs are not suitable for 'milling' large amounts of material, they are for light stock removal and high revolutions 'LOW FEED - HIGH SPEED'. • Always ensure that at least 70% of the shank length is clamped by the collet or chuck of the tool being used. • Always ensure that the tool is rated to the recommended operating speed of the burr.
price : 1,196.00 Baht / EA
Stock Location QTY Lead time (Days) Local Thailand 73 7 International 73 25 -
ITEM NO : 2000797
12.7x19mm POINTED TREE CARBIDE BURR CUT-9
BRAND : YORK
PART NO : YRK2104289K
Carbide Rotary Burrs - Pointed Tree Pointed Tree. All sizes are nominal with a 6mm shank unless other wise stated. Cut Numbers: Cut 6 - Double Cut. Crosscut and double cut to improve control and chipbreaks. Manufactured from high grade tungsten carbide for general-purpose use. Cut 9 - Chipbreaker Chipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron. Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc. up to HRC65 hardness. Please note: • Work piece and tools should always be steady and well supported. • Carbide burrs are not suitable for 'milling' large amounts of material, they are for light stock removal and high revolutions 'LOW FEED - HIGH SPEED'. • Always ensure that at least 70% of the shank length is clamped by the collet or chuck of the tool being used. • Always ensure that the tool is rated to the recommended operating speed of the burr.
price : 1,114.00 Baht / EA
Stock Location QTY Lead time (Days) Local Thailand 103 7 International 103 25 -
ITEM NO : 2000831
12.7x22mm CONICAL SHAPE BURR DBL CUT
BRAND : YORK
PART NO : YRK2107326K
Carbide Rotary Burrs - Conical Shape Conical Shape. All sizes are nominal with a 6mm shank unless other wise stated. Cut Numbers: Cut 6 - Double Cut. Crosscut and double cut to improve control and chipbreaks. Manufactured from high grade tungsten carbide for general-purpose use. Cut 9 - Chipbreaker Chipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron. Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc. up to HRC65 hardness. Please note: • Work piece and tools should always be steady and well supported. • Carbide burrs are not suitable for 'milling' large amounts of material, they are for light stock removal and high revolutions 'LOW FEED - HIGH SPEED'. • Always ensure that at least 70% of the shank length is clamped by the collet or chuck of the tool being used. • Always ensure that the tool is rated to the recommended operating speed of the burr.
price : 1,013.00 Baht / EA
Stock Location QTY Lead time (Days) Local Thailand 285 7 International 285 25 -
ITEM NO : 2000832
12.7x22mm CONICAL SHAPE CARBIDE BURR CUT-9
BRAND : YORK
PART NO : YRK2107329K
Carbide Rotary Burrs - Conical Shape Conical Shape. All sizes are nominal with a 6mm shank unless other wise stated. Cut Numbers: Cut 6 - Double Cut. Crosscut and double cut to improve control and chipbreaks. Manufactured from high grade tungsten carbide for general-purpose use. Cut 9 - Chipbreaker Chipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron. Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc. up to HRC65 hardness. Please note: • Work piece and tools should always be steady and well supported. • Carbide burrs are not suitable for 'milling' large amounts of material, they are for light stock removal and high revolutions 'LOW FEED - HIGH SPEED'. • Always ensure that at least 70% of the shank length is clamped by the collet or chuck of the tool being used. • Always ensure that the tool is rated to the recommended operating speed of the burr.
price : 1,013.00 Baht / EA
Stock Location QTY Lead time (Days) Local Thailand 117 7 International 117 25 -
ITEM NO : 2000808
12.7x22mm OVAL SHAPE CARBIDE BURR CUT-9
BRAND : YORK
PART NO : YRK2105249K
Carbide Rotary Burrs - Oval shape Oval Shape. All sizes are nominal with a 6mm shank unless other wise stated. Cut 9 - Chipbreaker Chipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron. Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc. up to HRC65 hardness. Please note: • Work piece and tools should always be steady and well supported. • Carbide burrs are not suitable for 'milling' large amounts of material, they are for light stock removal and high revolutions 'LOW FEED - HIGH SPEED'. • Always ensure that at least 70% of the shank length is clamped by the collet or chuck of the tool being used. • Always ensure that the tool is rated to the recommended operating speed of the burr.
price : 1,052.00 Baht / EA
Stock Location QTY Lead time (Days) Local Thailand 5 7 International 5 25 -
ITEM NO : 2000771
12.7x25mm CYLINDRICAL BALL NOSED CARB' BURR DBL CU
BRAND : YORK
PART NO : YRK2101326K
Carbide Rotary Burrs - Cylindrical Ball Nosed Cylindrical Ball Nosed. All sizes are nominal with a 6mm shank unless other wise stated. Cut Numbers: Cut 3 - Rapid Cut. for use on softer non ferrous and plastic materials, i.e aluminium, fibreglass, plastics, hard rubber and zinc alloy, Cut 6 - Double Cut. Crosscut and double cut to improve control and chipbreaks. Manufactured from high grade tungsten carbide for general-purpose use. Cut 9 - Chipbreaker Chipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron. Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc. up to HRC65 hardness. Please note: • Work piece and tools should always be steady and well supported. • Carbide burrs are not suitable for 'milling' large amounts of material, they are for light stock removal and high revolutions 'LOW FEED - HIGH SPEED'. • Always ensure that at least 70% of the shank length is clamped by the collet or chuck of the tool being used. • Always ensure that the tool is rated to the recommended operating speed of the burr.
price : 1,217.00 Baht / EA
Stock Location QTY Lead time (Days) Local Thailand 1638 7 International 1634 25 -
ITEM NO : 2000741
12.7x25mm CYLINDRICAL ENDCUT CARBIDE BURR CUT-9
BRAND : YORK
PART NO : YRK2100289K
Carbide Rotary Burrs - Cylindrical-End Cutting Cylindrical-End Cutting All sizes are nominal with a 6mm shank unless other wise stated. Cut Numbers: Cut 3 - Rapid Cut. for use on softer non ferrous and plastic materials, i.e aluminium, fibreglass, plastics, hard rubber and zinc alloy, Cut 6 - Double Cut. Crosscut and double cut to improve control and chipbreaks. Manufactured from high grade tungsten carbide for general-purpose use. Cut 9 - Chipbreaker Chipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron. Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc. up to HRC65 hardness. Please note: • Work piece and tools should always be steady and well supported. • Carbide burrs are not suitable for 'milling' large amounts of material, they are for light stock removal and high revolutions 'LOW FEED - HIGH SPEED'. • Always ensure that at least 70% of the shank length is clamped by the collet or chuck of the tool being used. • Always ensure that the tool is rated to the recommended operating speed of the burr.
price : 1,350.00 Baht / EA
Stock Location QTY Lead time (Days) Local Thailand 36 7 International 36 25 -
ITEM NO : 2000740
12.7x25mm CYLINDRICAL ENDCUT CARBIDE BURR DBL CUT
BRAND : YORK
PART NO : YRK2100286K
Carbide Rotary Burrs - Cylindrical-End Cutting Cylindrical-End Cutting All sizes are nominal with a 6mm shank unless other wise stated. Cut Numbers: Cut 3 - Rapid Cut. for use on softer non ferrous and plastic materials, i.e aluminium, fibreglass, plastics, hard rubber and zinc alloy, Cut 6 - Double Cut. Crosscut and double cut to improve control and chipbreaks. Manufactured from high grade tungsten carbide for general-purpose use. Cut 9 - Chipbreaker Chipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron. Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc. up to HRC65 hardness. Please note: • Work piece and tools should always be steady and well supported. • Carbide burrs are not suitable for 'milling' large amounts of material, they are for light stock removal and high revolutions 'LOW FEED - HIGH SPEED'. • Always ensure that at least 70% of the shank length is clamped by the collet or chuck of the tool being used. • Always ensure that the tool is rated to the recommended operating speed of the burr.
price : 1,474.00 Baht / EA
Stock Location QTY Lead time (Days) Local Thailand 179 7 International 182 25 -
ITEM NO : 2000757
12.7x25mm CYLINDRICAL PLAIN END CARB' BURR DBL CUT
BRAND : YORK
PART NO : YRK2100786K
Carbide Rotary Burrs - Cylindrical Plain End Cut 6 double cut tungsten carbide rotary burrs feature a crosscut and double cut to improve control of chipbreaks. They are manufactured from high grade tungsten carbide for general-purpose use. Features and Benefits • Tungsten carbide construction for increased strength • Crosscut and double cut improves control of chipbreaks • Ideal for general purpose machining Typical Applications • Deburring • Polishing • Cast iron • Cast steel • Carbon steel • Alloy steel • Stainless steel up to HRC65 hardness. Notes • Work piece and tools should always be steady and well supported. • Carbide burrs are not suitable for 'milling' large amounts of material, they are for light stock removal and high revolutions 'LOW FEED - HIGH SPEED'. • Always ensure that at least 70% of the shank length is clamped by the collet or chuck of the tool being used. • Always ensure that the tool is rated to the recommended operating speed of the burr.
price : 1,278.00 Baht / EA
Stock Location QTY Lead time (Days) Local Thailand 543 7 International 522 25 -
ITEM NO : 2000758
12.7x25mm CYLINDRICAL PLAIN END CARBIDE BURR CUT-9
BRAND : YORK
PART NO : YRK2100789K
Cut-9 Chipbreaker Cylindrical Plain End Carbide Rotary Burrs Cut-9 chipbreaker rotary burrs are designed for fast stock removal and improved control for reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron. Features and Benefits • Solid carbide construction • Enables fast stock removal on hard materials • Allows for improved control and reduced chips Typical Applications • Deburring • Polishing • Cast iron • Cast steel • Carbon steel • Alloy steel • Stainless steel up to HRC65 hardness. Notes • Work piece and tools should always be steady and well supported. • Carbide burrs are not suitable for 'milling' large amounts of material, they are for light stock removal and high revolutions 'LOW FEED - HIGH SPEED'. • Always ensure that at least 70% of the shank length is clamped by the collet or chuck of the tool being used. • Always ensure that the tool is rated to the recommended operating speed of the burr.
price : 1,319.00 Baht / EA
Stock Location QTY Lead time (Days) Local Thailand 161 7 International 161 25 -
ITEM NO : 2000799
12.7x25mm POINTED TREE CARBIDE BURR CUT-9
BRAND : YORK
PART NO : YRK2104329K
Carbide Rotary Burrs - Pointed Tree Pointed Tree. All sizes are nominal with a 6mm shank unless other wise stated. Cut Numbers: Cut 6 - Double Cut. Crosscut and double cut to improve control and chipbreaks. Manufactured from high grade tungsten carbide for general-purpose use. Cut 9 - Chipbreaker Chipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron. Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc. up to HRC65 hardness. Please note: • Work piece and tools should always be steady and well supported. • Carbide burrs are not suitable for 'milling' large amounts of material, they are for light stock removal and high revolutions 'LOW FEED - HIGH SPEED'. • Always ensure that at least 70% of the shank length is clamped by the collet or chuck of the tool being used. • Always ensure that the tool is rated to the recommended operating speed of the burr.
price : 1,051.00 Baht / EA
Stock Location QTY Lead time (Days) Local Thailand 117 7 International 117 25 -
ITEM NO : 2000798
12.7x25mm POINTED TREE CARBIDE BURR DBL CUT
BRAND : YORK
PART NO : YRK2104326K
Carbide Rotary Burrs - Pointed Tree Pointed Tree. All sizes are nominal with a 6mm shank unless other wise stated. Cut Numbers: Cut 6 - Double Cut. Crosscut and double cut to improve control and chipbreaks. Manufactured from high grade tungsten carbide for general-purpose use. Cut 9 - Chipbreaker Chipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron. Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc. up to HRC65 hardness. Please note: • Work piece and tools should always be steady and well supported. • Carbide burrs are not suitable for 'milling' large amounts of material, they are for light stock removal and high revolutions 'LOW FEED - HIGH SPEED'. • Always ensure that at least 70% of the shank length is clamped by the collet or chuck of the tool being used. • Always ensure that the tool is rated to the recommended operating speed of the burr.
price : 1,191.00 Baht / EA
Stock Location QTY Lead time (Days) Local Thailand 34 7 International 34 25 -
ITEM NO : 2000789
12.7x25mm ROUND TREE CARBIDE BURR CUT-9
BRAND : YORK
PART NO : YRK2103329K
Carbide Rotary Burr - Round Tree Round Tree. All sizes are nominal with a 6mm shank unless other wise stated. Cut Numbers: Cut 6 - Double Cut. Crosscut and double cut to improve control and chipbreaks. Manufactured from high grade tungsten carbide for general-purpose use. Cut 9 - Chipbreaker Chipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron. Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc. up to HRC65 hardness. Please note: • Work piece and tools should always be steady and well supported. • Carbide burrs are not suitable for 'milling' large amounts of material, they are for light stock removal and high revolutions 'LOW FEED - HIGH SPEED'. • Always ensure that at least 70% of the shank length is clamped by the collet or chuck of the tool being used. • Always ensure that the tool is rated to the recommended operating speed of the burr.
price : 1,032.00 Baht / EA
Stock Location QTY Lead time (Days) Local Thailand 50 7 International 50 25 -
ITEM NO : 2000788
12.7x25mm ROUND TREE CARBIDE BURR DBL CUT
BRAND : YORK
PART NO : YRK2103326K
Carbide Rotary Burr - Round Tree Round Tree. All sizes are nominal with a 6mm shank unless other wise stated. Cut Numbers: Cut 6 - Double Cut. Crosscut and double cut to improve control and chipbreaks. Manufactured from high grade tungsten carbide for general-purpose use. Cut 9 - Chipbreaker Chipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron. Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc. up to HRC65 hardness. Please note: • Work piece and tools should always be steady and well supported. • Carbide burrs are not suitable for 'milling' large amounts of material, they are for light stock removal and high revolutions 'LOW FEED - HIGH SPEED'. • Always ensure that at least 70% of the shank length is clamped by the collet or chuck of the tool being used. • Always ensure that the tool is rated to the recommended operating speed of the burr.
price : 1,032.00 Baht / EA
Stock Location QTY Lead time (Days) Local Thailand 1259 7 International 1259 25 -
ITEM NO : 2000843
12.7x28mm CONICAL 14 DEGCARBIDE BURR DBL CUT
BRAND : YORK
PART NO : YRK2108326K
Carbide Rotary Burrs - Conical 14° Conical 14°. All sizes are nominal with a 6mm shank unless other wise stated. Cut Numbers: Cut 6 - Double Cut. Crosscut and double cut to improve control and chipbreaks. Manufactured from high grade tungsten carbide for general-purpose use. Cut 9 - Chipbreaker Chipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron. Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc. up to HRC65 hardness. Please note: • Work piece and tools should always be steady and well supported. • Carbide burrs are not suitable for 'milling' large amounts of material, they are for light stock removal and high revolutions 'LOW FEED - HIGH SPEED'. • Always ensure that at least 70% of the shank length is clamped by the collet or chuck of the tool being used. • Always ensure that the tool is rated to the recommended operating speed of the burr.
price : 1,271.00 Baht / EA
Stock Location QTY Lead time (Days) Local Thailand 216 7 International 216 25 -
ITEM NO : 2000844
12.7x28mm CONICAL 14DEG CARBIDE BURR CUT-9
BRAND : YORK
PART NO : YRK2108329K
Carbide Rotary Burrs - Conical 14° Conical 14°. All sizes are nominal with a 6mm shank unless other wise stated. Cut Numbers: Cut 6 - Double Cut. Crosscut and double cut to improve control and chipbreaks. Manufactured from high grade tungsten carbide for general-purpose use. Cut 9 - Chipbreaker Chipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron. Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc. up to HRC65 hardness. Please note: • Work piece and tools should always be steady and well supported. • Carbide burrs are not suitable for 'milling' large amounts of material, they are for light stock removal and high revolutions 'LOW FEED - HIGH SPEED'. • Always ensure that at least 70% of the shank length is clamped by the collet or chuck of the tool being used. • Always ensure that the tool is rated to the recommended operating speed of the burr.
price : 1,413.00 Baht / EA
Stock Location QTY Lead time (Days) Local Thailand 346 7 International 346 25 -
ITEM NO : 2000780
12.7x32mm FLAME SHAPE CARBIDE BURR CUT-9
BRAND : YORK
PART NO : YRK2102329K
Carbide Rotary Burrs - Flame Shape Flame Shape. All sizes are nominal with a 6mm shank unless other wise stated. Cut Numbers: Cut 6 - Double Cut. Crosscut and double cut to improve control and chipbreaks. Manufactured from high grade tungsten carbide for general-purpose use. Cut 9 - Chipbreaker Chipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron. Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc. up to HRC65 hardness. Please note: • Work piece and tools should always be steady and well supported. • Carbide burrs are not suitable for 'milling' large amounts of material, they are for light stock removal and high revolutions 'LOW FEED - HIGH SPEED'. • Always ensure that at least 70% of the shank length is clamped by the collet or chuck of the tool being used. • Always ensure that the tool is rated to the recommended operating speed of the burr.
price : 1,284.00 Baht / EA
Stock Location QTY Lead time (Days) Local Thailand 280 7 International 280 25 -
ITEM NO : 2000779
12.7x32mm FLAME SHAPE CARBIDE BURR DBL CUT
BRAND : YORK
PART NO : YRK2102326K
Carbide Rotary Burrs - Flame Shape Flame Shape. All sizes are nominal with a 6mm shank unless other wise stated. Cut Numbers: Cut 6 - Double Cut. Crosscut and double cut to improve control and chipbreaks. Manufactured from high grade tungsten carbide for general-purpose use. Cut 9 - Chipbreaker Chipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron. Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc. up to HRC65 hardness. Please note: • Work piece and tools should always be steady and well supported. • Carbide burrs are not suitable for 'milling' large amounts of material, they are for light stock removal and high revolutions 'LOW FEED - HIGH SPEED'. • Always ensure that at least 70% of the shank length is clamped by the collet or chuck of the tool being used. • Always ensure that the tool is rated to the recommended operating speed of the burr.
price : 1,284.00 Baht / EA
Stock Location QTY Lead time (Days) Local Thailand 851 7 International 851 25 -
ITEM NO : 2000851
12.7x6.3mm CONICAL 90DEGCARBIDE BURR CUT-9
BRAND : YORK
PART NO : YRK2108959K
Carbide Rotary Burrs - Conical 90° Inc. Angle Conical 90° Inc. Angle. All sizes are nominal with a 6mm shank unless other wise stated. Cut Numbers: Cut 6 - Double Cut. Crosscut and double cut to improve control and chipbreaks. Manufactured from high grade tungsten carbide for general-purpose use. Cut 9 - Chipbreaker Chipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron. Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc. up to HRC65 hardness. Please note: • Work piece and tools should always be steady and well supported. • Carbide burrs are not suitable for 'milling' large amounts of material, they are for light stock removal and high revolutions 'LOW FEED - HIGH SPEED'. • Always ensure that at least 70% of the shank length is clamped by the collet or chuck of the tool being used. • Always ensure that the tool is rated to the recommended operating speed of the burr.
price : 1,148.00 Baht / EA
Stock Location QTY Lead time (Days) Local Thailand 465 7 International 465 25 -
ITEM NO : 2000703
12x12mm BALL SHAPE CARBIDE BURR CUT 9
BRAND : KENNEDY
PART NO : KEN2106320K
Carbide Burrs - Ball Shape Ball Shape All sizes are nominal. Sizes marked * are 3mm shank, all others are 6mm shank. Cut Numbers: Cut 3 - Rapid Cut For use on softer non-ferrous and plastic materials, i.e. aluminium, fibreglass, plastics, hard rubber and zinc alloy. Cut 9 - Chipbreaker Chipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron.
price : 1,062.00 Baht / EA
Stock Location QTY Lead time (Days) Local Thailand 18 7 International 18 25 -
ITEM NO : 2000649
12x20mm CYL. CARBIDE ENDCUT BURR CUT 9
BRAND : KENNEDY
PART NO : KEN2100280K
Carbide Burrs - Cylindrical-End Cutting Cylindrical-End Cutting. All sizes are nominal. Sizes marked * are 3mm shank, all others are 6mm shank. Cut Numbers: Cut 3 - Rapid Cut For use on softer non-ferrous and plastic materials, i.e. aluminium, fibreglass, plastics, hard rubber and zinc alloy. Cut 9 - Chipbreaker Chipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron. Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc. up to HRC65 hardness. Please note: Workpiece and tools should always be steady and well supported. Carbide burrs are not suitable for 'milling' large amounts of material, they are for light stock removal at high rpm's 'LOW FEED - HIGH SPEED'. Always ensure that at least 70% of the shank length is clamped by the collet or chuck of the tool being used. Always ensure that the tool is rated to the recommended operating speed of the burr.
price : 1,136.00 Baht / EA
Stock Location QTY Lead time (Days) Local Thailand 7 7 International 7 25 -
ITEM NO : 2000659
12x20mm CYL. CARBIDE PLAIN END BURR CUT 9
BRAND : KENNEDY
PART NO : KEN2100780K
Carbide Burrs - Cylindrical Plain End Cylindrical Plain End. All sizes are nominal. Sizes marked * are 3mm shank, all others are 6mm shank. Cut Numbers: Cut 3 - Rapid Cut For use on softer non-ferrous and plastic materials, i.e. aluminium, fibreglass, plastics, hard rubber and zinc alloy. Cut 9 - Chipbreaker Chipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron. Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc. up to HRC65 hardness. Please note: Workpiece and tools should always be steady and well supported. Carbide burrs are not suitable for 'milling' large amounts of material, they are for light stock removal at high rpm's 'LOW FEED - HIGH SPEED'. Always ensure that at least 70% of the shank length is clamped by the collet or chuck of the tool being used. Always ensure that the tool is rated to the recommended operating speed of the burr.
price : 1,113.00 Baht / EA
Stock Location QTY Lead time (Days) Local Thailand 126 7 International 126 25 -
ITEM NO : 2000694
12x20mm OVAL SHAPE CARBIDE BURR CUT 9
BRAND : KENNEDY
PART NO : KEN2105240K
Carbide Burrs - Oval Shape Oval Shape. All sizes are nominal. Sizes marked * are 3mm shank, all others are 6mm shank. Cut Numbers: Cut 3 - Rapid Cut For use on softer non-ferrous and plastic materials, i.e. aluminium, fibreglass, plastics, hard rubber and zinc alloy. Cut 9 - Chipbreaker Chipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron. Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc. up to HRC65 hardness. Please note: Workpiece and tools should always be steady and well supported. Carbide burrs are not suitable for 'milling' large amounts of material, they are for light stock removal at high rpm's 'LOW FEED - HIGH SPEED'. Always ensure that at least 70% of the shank length is clamped by the collet or chuck of the tool being used. Always ensure that the tool is rated to the recommended operating speed of the burr.
price : 1,136.00 Baht / EA
Stock Location QTY Lead time (Days) Local Thailand 20 7 International 20 25 -
ITEM NO : 2000688
12x20mm POINTED TREE CARBIDE BURR CUT 9
BRAND : KENNEDY
PART NO : KEN2104280K
Carbide Burrs - Pointed Tree Pointed Tree. All sizes are nominal. Sizes marked * are 3mm shank, all others are 6mm shank. Cut Numbers: Cut 9 - Chipbreaker Chipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron.
price : 1,022.00 Baht / EA
Stock Location QTY Lead time (Days) Local Thailand 6 7 International 6 25 -
ITEM NO : 2000709
12x25mm CONICAL SHAPE CARBIDE BURR CUT 9
BRAND : KENNEDY
PART NO : KEN2107320K
Carbide Burrs - Conical Conical. All sizes are nominal. Sizes marked * are 3mm shank, all others are 6mm shank. Cut Numbers: Cut 9 - Chipbreaker Chipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron. Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc. up to HRC65 hardness. Please note: Workpiece and tools should always be steady and well supported. Carbide burrs are not suitable for 'milling' large amounts of material, they are for light stock removal at high rpm's 'LOW FEED - HIGH SPEED'. Always ensure that at least 70% of the shank length is clamped by the collet or chuck of the tool being used. Always ensure that the tool is rated to the recommended operating speed of the burr.
price : 1,136.00 Baht / EA
Stock Location QTY Lead time (Days) Local Thailand 46 7 International 46 25
