Categories 4
สินค้าที่พบ
-
ITEM NO : 3327739
6 -DRAWER X/LARGE EXTRA DUTYTOOL CHEST
BRAND : KENNEDY
รหัสสินค้า : KEN5944865K
Keep your tools safe and neatly organised with this extra large, heavy-duty tool chest from Kennedy?. Constructed from durable, heavyweight material, this tool chest will protect and store your tools in a range of settings, from home workshops to industrial warehouses. Features and Benefits ? Large top compartment to fit larger tools ? Heavy gauge steel construction for rigidity and security ? Epoxy powder paint finish resists corrosion and abrasion ? Fully lockable drawers for security ? Full width piano hinge for strength and tamper prevention ? Quick release ball bearing drawer sliders for easy access ? Tote Tray, drawers liners, and a top mat keep tools in place ? Suitable as a standalone unit or combined with a roller cabinet for maximum storage ? Rigid aluminium edges handles for durable access and product life
ราคา : 39,117.00 บาท / EA
สต็อกสินค้า คลังสินค้า จำนวน ระยะเวลาจัดส่ง (วัน) ประเทศไทย 11 7 ต่างประเทศ 11 90 -
ITEM NO : 3107758
COUPLER
BRAND : EVERTITE
รหัสสินค้า : 307DCBR
CAP:QUICK DISCONNECT TYPE DUST, COUPLER, SIZE 3/4IN MATL BRASS, CONN CAMLOCK, Condition Class : Surplus Never Used original packaging
ราคา : 832.00 บาท / EA
-
ITEM NO : 3108629
SEAL KIT
BRAND : CUMMINS
รหัสสินค้า : 3934486
KIT: TYPE SEAL OIL REAR (blank) USE: ENGINE CUMMINS C8.3 Condition Class : Surplus Never Used original packaging
ราคา : 1,212.00 บาท / ST
-
ITEM NO : 3329057
"RITE" PACKING TAPE - Green
BRAND : LOCAL SUPPLY
รหัสสินค้า : N/A
CM0000010 "RITE" PACKING TAPE - Green Size: 2 Inch x 66 Yard THK: 0.05 mm. P/N: N/A MFG: LOCAL SUPPLY
ราคา : ขอใบเสนอราคา
-
ITEM NO : 3329058
"RONG" PACKING TAPE - Red
BRAND : LOCAL SUPPLY
รหัสสินค้า : N/A
CM0000011 "RONG" PACKING TAPE - Red Size: 2 Inch x 66 Yard THK: 0.05 mm. P/N: N/A MFG: LOCAL SUPPLY
ราคา : ขอใบเสนอราคา
-
ITEM NO : 3328993
(FOR GREEN HOSE) OXYGEN HOSE
BRAND : LOCAL SUPPLY
รหัสสินค้า : N/A
**Special clearance prices! Limited stock available.**
FG1010906
GREEN HOSE - OXYGEN HOSE
SIZE 1/4" LENGTH 20M INCLUDED WITH
QUICK CONNECT/FLASH BACK ARRESTERราคา : ขอใบเสนอราคา
-
ITEM NO : 3105778
0-12.7mm/0.5" M/F INDICATOR0.001mm/0.00005"
BRAND : OXFORD
รหัสสินค้า : OXD3316040K
0-12.7mm/0.5" M/F INDICATOR0.001mm/0.00005"
ราคา : 10,868.00 บาท / EA
สต็อกสินค้า คลังสินค้า จำนวน ระยะเวลาจัดส่ง (วัน) ประเทศไทย 31 7 ต่างประเทศ 31 25 -
ITEM NO : 2016578
0.25mm HSS S/S JOBBER DRILL
BRAND : SHERWOOD
รหัสสินค้า : SHR0250010X
J100 Series HSS Straight Shank Black Oxide Jobber Drills (Metric) The J100 Series are general purpose HSS straight shank drills with a black oxide finish. Ideal for applications involving steel (including cast steel) cast iron (Including malleable cast iron) as well as nickel, brass aluminium alloys and graphite. Their 118° point allows for precise hole alignment and reliable cutting performance whilst the black oxide coating helps reduce heat by retaining coolant on the tool surface. It also helps reduce the risk of the tool staining. Features and Benefits • General purpose drills with a black oxide finish • Ideal for applications involving steel, iron, nickel, brass, aluminium alloy and graphite • Point angle of 118° for precise holemaking and precision cutting • Black oxide coating helps aid chip flow, reduce heat and prevent staining Standards • Manufactured to BS 328/DIN338RN Typical Applications • Cutting and drilling • Ferrous materials Notes • Available in sizes 0.25mm -20.00mm
ราคา : 773.00 บาท / PK of 10 EA
สต็อกสินค้า คลังสินค้า จำนวน ระยะเวลาจัดส่ง (วัน) ประเทศไทย 98 7 ต่างประเทศ 98 25 -
ITEM NO : 2016579
0.30mm HSS S/S JOBBER DRILL
BRAND : SHERWOOD
รหัสสินค้า : SHR0250012A
J100 Series HSS Straight Shank Black Oxide Jobber Drills (Metric) The J100 Series are general purpose HSS straight shank drills with a black oxide finish. Ideal for applications involving steel (including cast steel) cast iron (Including malleable cast iron) as well as nickel, brass aluminium alloys and graphite. Their 118° point allows for precise hole alignment and reliable cutting performance whilst the black oxide coating helps reduce heat by retaining coolant on the tool surface. It also helps reduce the risk of the tool staining. Features and Benefits • General purpose drills with a black oxide finish • Ideal for applications involving steel, iron, nickel, brass, aluminium alloy and graphite • Point angle of 118° for precise holemaking and precision cutting • Black oxide coating helps aid chip flow, reduce heat and prevent staining Standards • Manufactured to BS 328/DIN338RN Typical Applications • Cutting and drilling • Ferrous materials Notes • Available in sizes 0.25mm -20.00mm
ราคา : 773.00 บาท / PK of 10 EA
สต็อกสินค้า คลังสินค้า จำนวน ระยะเวลาจัดส่ง (วัน) ประเทศไทย 90 7 ต่างประเทศ 900 25 -
ITEM NO : 2016580
0.35mm HSS S/S JOBBER DRILL
BRAND : SHERWOOD
รหัสสินค้า : SHR0250014F
J100 Series HSS Straight Shank Black Oxide Jobber Drills (Metric) The J100 Series are general purpose HSS straight shank drills with a black oxide finish. Ideal for applications involving steel (including cast steel) cast iron (Including malleable cast iron) as well as nickel, brass aluminium alloys and graphite. Their 118° point allows for precise hole alignment and reliable cutting performance whilst the black oxide coating helps reduce heat by retaining coolant on the tool surface. It also helps reduce the risk of the tool staining. Features and Benefits • General purpose drills with a black oxide finish • Ideal for applications involving steel, iron, nickel, brass, aluminium alloy and graphite • Point angle of 118° for precise holemaking and precision cutting • Black oxide coating helps aid chip flow, reduce heat and prevent staining Standards • Manufactured to BS 328/DIN338RN Typical Applications • Cutting and drilling • Ferrous materials Notes • Available in sizes 0.25mm -20.00mm
ราคา : 509.00 บาท / PK of 10 EA
สต็อกสินค้า คลังสินค้า จำนวน ระยะเวลาจัดส่ง (วัน) ประเทศไทย 34 7 ต่างประเทศ 34 25 -
ITEM NO : 2018370
0.40mm CARBIDE PCB DRILL
BRAND : SHERWOOD
รหัสสินค้า : SHR1583004D
Carbide Printed Circuit Board Drills Solid carbide printed circuit board drills. Suitable for drilling through printed circuit boards. Shank diameter 3.175mm, 38mm overall length. Manufactured to DIN 1899.
ราคา : 310.00 บาท / EA
สต็อกสินค้า คลังสินค้า จำนวน ระยะเวลาจัดส่ง (วัน) ประเทศไทย 292 7 ต่างประเทศ 292 25 -
ITEM NO : 2016581
0.40mm HSS S/S JOBBER DRILL
BRAND : SHERWOOD
รหัสสินค้า : SHR0250016L
J100 Series HSS Straight Shank Black Oxide Jobber Drills (Metric) The J100 Series are general purpose HSS straight shank drills with a black oxide finish. Ideal for applications involving steel (including cast steel) cast iron (Including malleable cast iron) as well as nickel, brass aluminium alloys and graphite. Their 118° point allows for precise hole alignment and reliable cutting performance whilst the black oxide coating helps reduce heat by retaining coolant on the tool surface. It also helps reduce the risk of the tool staining. Features and Benefits • General purpose drills with a black oxide finish • Ideal for applications involving steel, iron, nickel, brass, aluminium alloy and graphite • Point angle of 118° for precise holemaking and precision cutting • Black oxide coating helps aid chip flow, reduce heat and prevent staining Standards • Manufactured to BS 328/DIN338RN Typical Applications • Cutting and drilling • Ferrous materials Notes • Available in sizes 0.25mm -20.00mm
ราคา : 509.00 บาท / PK of 10 EA
สต็อกสินค้า คลังสินค้า จำนวน ระยะเวลาจัดส่ง (วัน) ประเทศไทย 32 7 ต่างประเทศ 32 25 -
ITEM NO : 2018371
0.45mm CARBIDE PCB DRILL
BRAND : SHERWOOD
รหัสสินค้า : SHR1583005E
Carbide Printed Circuit Board Drills Solid carbide printed circuit board drills. Suitable for drilling through printed circuit boards. Shank diameter 3.175mm, 38mm overall length. Manufactured to DIN 1899.
ราคา : 310.00 บาท / EA
สต็อกสินค้า คลังสินค้า จำนวน ระยะเวลาจัดส่ง (วัน) ประเทศไทย 170 7 ต่างประเทศ 170 25 -
ITEM NO : 3104056
0.5 l cleaning solution Suitable for all lenses
BRAND : UVEX
รหัสสินค้า : 9972.1
0.5 liter cleaning cartridge for all UVEX sunglasses models
ราคา : 380.00 บาท / ชิ้น
-
ITEM NO : 2022100
0.5 TON 2.5MTR HAND CHAINHOISTC/W OVERLOAD BRAKE
BRAND : MATLOCK
รหัสสินค้า : MTL9414200K
Hand Chain Hoists Quality made 2.5m and 3m chain hoists with a capacity ranging from ½ to 3 tonnes. Fitted with heat treated and ground, triple-spur geared shaft and pinion. Hooks fitted with robust safety latches and 360 degree rotation. All models include mechanical load brake for extra safety. EN 13157+A1:2009 and EC Council Directive 2006/42/EC Machinery compliant.
ราคา : 7,979.00 บาท / EA
สต็อกสินค้า คลังสินค้า จำนวน ระยะเวลาจัดส่ง (วัน) ประเทศไทย 1 7 ต่างประเทศ 4 25 -
ITEM NO : 2018372
0.50mm CARBIDE PCB DRILL
BRAND : SHERWOOD
รหัสสินค้า : SHR1583006F
Carbide Printed Circuit Board Drills Solid carbide printed circuit board drills. Suitable for drilling through printed circuit boards. Shank diameter 3.175mm, 38mm overall length. Manufactured to DIN 1899.
ราคา : 310.00 บาท / EA
สต็อกสินค้า คลังสินค้า จำนวน ระยะเวลาจัดส่ง (วัน) ประเทศไทย 133 7 ต่างประเทศ 106 25 -
ITEM NO : 2016583
0.50mm HSS S/S JOBBER DRILL
BRAND : SHERWOOD
รหัสสินค้า : SHR0250020R
J100 Series HSS Straight Shank Black Oxide Jobber Drills (Metric) The J100 Series are general purpose HSS straight shank drills with a black oxide finish. Ideal for applications involving steel (including cast steel) cast iron (Including malleable cast iron) as well as nickel, brass aluminium alloys and graphite. Their 118° point allows for precise hole alignment and reliable cutting performance whilst the black oxide coating helps reduce heat by retaining coolant on the tool surface. It also helps reduce the risk of the tool staining. Features and Benefits • General purpose drills with a black oxide finish • Ideal for applications involving steel, iron, nickel, brass, aluminium alloy and graphite • Point angle of 118° for precise holemaking and precision cutting • Black oxide coating helps aid chip flow, reduce heat and prevent staining Standards • Manufactured to BS 328/DIN338RN Typical Applications • Cutting and drilling • Ferrous materials Notes • Available in sizes 0.25mm -20.00mm
ราคา : 509.00 บาท / PK of 10 EA
สต็อกสินค้า คลังสินค้า จำนวน ระยะเวลาจัดส่ง (วัน) ประเทศไทย 41 7 ต่างประเทศ 41 25 -
ITEM NO : 2018373
0.55mm CARBIDE PCB DRILL
BRAND : SHERWOOD
รหัสสินค้า : SHR1583007G
Carbide Printed Circuit Board Drills Solid carbide printed circuit board drills. Suitable for drilling through printed circuit boards. Shank diameter 3.175mm, 38mm overall length. Manufactured to DIN 1899.
ราคา : 310.00 บาท / EA
สต็อกสินค้า คลังสินค้า จำนวน ระยะเวลาจัดส่ง (วัน) ประเทศไทย 147 7 ต่างประเทศ 147 25 -
ITEM NO : 2016584
0.55mm HSS S/S JOBBER DRILL
BRAND : SHERWOOD
รหัสสินค้า : SHR0250022T
J100 Series HSS Straight Shank Black Oxide Jobber Drills (Metric) The J100 Series are general purpose HSS straight shank drills with a black oxide finish. Ideal for applications involving steel (including cast steel) cast iron (Including malleable cast iron) as well as nickel, brass aluminium alloys and graphite. Their 118° point allows for precise hole alignment and reliable cutting performance whilst the black oxide coating helps reduce heat by retaining coolant on the tool surface. It also helps reduce the risk of the tool staining. Features and Benefits • General purpose drills with a black oxide finish • Ideal for applications involving steel, iron, nickel, brass, aluminium alloy and graphite • Point angle of 118° for precise holemaking and precision cutting • Black oxide coating helps aid chip flow, reduce heat and prevent staining Standards • Manufactured to BS 328/DIN338RN Typical Applications • Cutting and drilling • Ferrous materials Notes • Available in sizes 0.25mm -20.00mm
ราคา : 509.00 บาท / PK of 10 EA
สต็อกสินค้า คลังสินค้า จำนวน ระยะเวลาจัดส่ง (วัน) ประเทศไทย 100 7 ต่างประเทศ 100 25 -
ITEM NO : 2018374
0.60mm CARBIDE PCB DRILL
BRAND : SHERWOOD
รหัสสินค้า : SHR1583008H
Carbide Printed Circuit Board Drills Solid carbide printed circuit board drills. Suitable for drilling through printed circuit boards. Shank diameter 3.175mm, 38mm overall length. Manufactured to DIN 1899.
ราคา : 310.00 บาท / EA
สต็อกสินค้า คลังสินค้า จำนวน ระยะเวลาจัดส่ง (วัน) ประเทศไทย 188 7 ต่างประเทศ 188 25 -
ITEM NO : 2016586
0.60mm HSS S/S JOBBER DRILL
BRAND : SHERWOOD
รหัสสินค้า : SHR0250024W
J100 Series HSS Straight Shank Black Oxide Jobber Drills (Metric) The J100 Series are general purpose HSS straight shank drills with a black oxide finish. Ideal for applications involving steel (including cast steel) cast iron (Including malleable cast iron) as well as nickel, brass aluminium alloys and graphite. Their 118° point allows for precise hole alignment and reliable cutting performance whilst the black oxide coating helps reduce heat by retaining coolant on the tool surface. It also helps reduce the risk of the tool staining. Features and Benefits • General purpose drills with a black oxide finish • Ideal for applications involving steel, iron, nickel, brass, aluminium alloy and graphite • Point angle of 118° for precise holemaking and precision cutting • Black oxide coating helps aid chip flow, reduce heat and prevent staining Standards • Manufactured to BS 328/DIN338RN Typical Applications • Cutting and drilling • Ferrous materials Notes • Available in sizes 0.25mm -20.00mm
ราคา : 509.00 บาท / PK of 10 EA
สต็อกสินค้า คลังสินค้า จำนวน ระยะเวลาจัดส่ง (วัน) ประเทศไทย 162 7 ต่างประเทศ 162 25 -
ITEM NO : 2017226
0.60x60mm O/Ax40mm FL S/S VENTDRILL
BRAND : SHERWOOD
รหัสสินค้า : SHR0252180D
HSS Straight Shank Quick Spiral, Extra Length Vent Drills - Metric Sherwood HSS quick spiral extra length Vent drills are designed for drilling the initial vent hole in aluminium tyre moulds, and are also used in the tyre industry for clean-out work post production where the high helix and extra reach are ideal for the efficient evacuation of waste rubber. Manufactured to works standard. 118° point angle.
ราคา : 301.00 บาท / EA
สต็อกสินค้า คลังสินค้า จำนวน ระยะเวลาจัดส่ง (วัน) ประเทศไทย 516 7 ต่างประเทศ 516 25 -
ITEM NO : 2016588
0.65mm HSS S/S JOBBER DRILL
BRAND : SHERWOOD
รหัสสินค้า : SHR0250026Y
J100 Series HSS Straight Shank Black Oxide Jobber Drills (Metric) The J100 Series are general purpose HSS straight shank drills with a black oxide finish. Ideal for applications involving steel (including cast steel) cast iron (Including malleable cast iron) as well as nickel, brass aluminium alloys and graphite. Their 118° point allows for precise hole alignment and reliable cutting performance whilst the black oxide coating helps reduce heat by retaining coolant on the tool surface. It also helps reduce the risk of the tool staining. Features and Benefits • General purpose drills with a black oxide finish • Ideal for applications involving steel, iron, nickel, brass, aluminium alloy and graphite • Point angle of 118° for precise holemaking and precision cutting • Black oxide coating helps aid chip flow, reduce heat and prevent staining Standards • Manufactured to BS 328/DIN338RN Typical Applications • Cutting and drilling • Ferrous materials Notes • Available in sizes 0.25mm -20.00mm
ราคา : 509.00 บาท / PK of 10 EA
สต็อกสินค้า คลังสินค้า จำนวน ระยะเวลาจัดส่ง (วัน) ประเทศไทย 20 7 ต่างประเทศ 18 25 -
ITEM NO : 2023756
0.6m ANTI WHIP HOSE FITTED WITH STD ADAPTOR & 1/4 NPT MALE THREAD
BRAND : KOBE
รหัสสินค้า : KBE2801360K
0.6mtr Anti Whip Hose, fitted with Standard Adaptor & 1/4 NPT Male Thread Air Tool Whip Hoses which distances an air tool from its air supply to prevent vibration is highly recommended by Health and Safety. The vibrations caused in the use of air tools make a coupling connection subject to Health & Safety Regulations. Features and Benefits • Helps to prolong the life of couplings and adaptors • Increases comfort of use • Enables you to use the tools safely. • Simply "Plug-in and go" Notes • 0.6mtr Anti Whip Hose, fitted with Standard Adaptor at one end & 1/4 NPT Male Thread at the other.
ราคา : 753.00 บาท / EA
สต็อกสินค้า คลังสินค้า จำนวน ระยะเวลาจัดส่ง (วัน) ประเทศไทย 41 7 ต่างประเทศ 41 25 -
ITEM NO : 2018375
0.70mm CARBIDE PCB DRILL
BRAND : SHERWOOD
รหัสสินค้า : SHR1583010K
Carbide Printed Circuit Board Drills Solid carbide printed circuit board drills. Suitable for drilling through printed circuit boards. Shank diameter 3.175mm, 38mm overall length. Manufactured to DIN 1899.
ราคา : 310.00 บาท / EA
สต็อกสินค้า คลังสินค้า จำนวน ระยะเวลาจัดส่ง (วัน) ประเทศไทย 76 7 ต่างประเทศ 76 25 -
ITEM NO : 2016590
0.70mm HSS S/S JOBBER DRILL
BRAND : SHERWOOD
รหัสสินค้า : SHR0250028A
J100 Series HSS Straight Shank Black Oxide Jobber Drills (Metric) The J100 Series are general purpose HSS straight shank drills with a black oxide finish. Ideal for applications involving steel (including cast steel) cast iron (Including malleable cast iron) as well as nickel, brass aluminium alloys and graphite. Their 118° point allows for precise hole alignment and reliable cutting performance whilst the black oxide coating helps reduce heat by retaining coolant on the tool surface. It also helps reduce the risk of the tool staining. Features and Benefits • General purpose drills with a black oxide finish • Ideal for applications involving steel, iron, nickel, brass, aluminium alloy and graphite • Point angle of 118° for precise holemaking and precision cutting • Black oxide coating helps aid chip flow, reduce heat and prevent staining Standards • Manufactured to BS 328/DIN338RN Typical Applications • Cutting and drilling • Ferrous materials Notes • Available in sizes 0.25mm -20.00mm
ราคา : 509.00 บาท / PK of 10 EA
สต็อกสินค้า คลังสินค้า จำนวน ระยะเวลาจัดส่ง (วัน) ประเทศไทย 812 7 ต่างประเทศ 812 25 -
ITEM NO : 2017227
0.70x76mm O/Ax40mm FL S/SVENT DRILL
BRAND : SHERWOOD
รหัสสินค้า : SHR0252180H
HSS Straight Shank Quick Spiral, Extra Length Vent Drills - Metric Sherwood HSS quick spiral extra length Vent drills are designed for drilling the initial vent hole in aluminium tyre moulds, and are also used in the tyre industry for clean-out work post production where the high helix and extra reach are ideal for the efficient evacuation of waste rubber. Manufactured to works standard. 118° point angle.
ราคา : 301.00 บาท / EA
สต็อกสินค้า คลังสินค้า จำนวน ระยะเวลาจัดส่ง (วัน) ประเทศไทย 15 7 ต่างประเทศ 85 25 -
ITEM NO : 2016591
0.72mm HSS S/S JOBBER DRILL
BRAND : SHERWOOD
รหัสสินค้า : SHR0250029B
J100 Series HSS Straight Shank Black Oxide Jobber Drills (Metric) The J100 Series are general purpose HSS straight shank drills with a black oxide finish. Ideal for applications involving steel (including cast steel) cast iron (Including malleable cast iron) as well as nickel, brass aluminium alloys and graphite. Their 118° point allows for precise hole alignment and reliable cutting performance whilst the black oxide coating helps reduce heat by retaining coolant on the tool surface. It also helps reduce the risk of the tool staining. Features and Benefits • General purpose drills with a black oxide finish • Ideal for applications involving steel, iron, nickel, brass, aluminium alloy and graphite • Point angle of 118° for precise holemaking and precision cutting • Black oxide coating helps aid chip flow, reduce heat and prevent staining Standards • Manufactured to BS 328/DIN338RN Typical Applications • Cutting and drilling • Ferrous materials Notes • Available in sizes 0.25mm -20.00mm
ราคา : 509.00 บาท / PK of 10 EA
สต็อกสินค้า คลังสินค้า จำนวน ระยะเวลาจัดส่ง (วัน) ประเทศไทย 5 7 ต่างประเทศ 5 25 -
ITEM NO : 2022105
0.75 TON 1.5MTR LEVER HOIST C/WOVERLOAD BREAK
BRAND : MATLOCK
รหัสสินค้า : MTL9416200K
Lever Hoists 750 to 3000kg range capacities. Fitted with heat treated and ground, triple-spur geared shaft and pinion. Hooks fitted with robust safety latches and rotate 360 degrees. Includes mechanical overload brake for extra safety. EN 13157+A1:2009 and EC Council Directive 2006/42/EC Machinery compliant.
ราคา : 9,972.00 บาท / EA
สต็อกสินค้า คลังสินค้า จำนวน ระยะเวลาจัดส่ง (วัน) ประเทศไทย 1 7 ต่างประเทศ 1 25 -
ITEM NO : 2018376
0.75mm CARBIDE PCB DRILL
BRAND : SHERWOOD
รหัสสินค้า : SHR1583011L
Carbide Printed Circuit Board Drills Solid carbide printed circuit board drills. Suitable for drilling through printed circuit boards. Shank diameter 3.175mm, 38mm overall length. Manufactured to DIN 1899.
ราคา : 310.00 บาท / EA
สต็อกสินค้า คลังสินค้า จำนวน ระยะเวลาจัดส่ง (วัน) ประเทศไทย 217 7 ต่างประเทศ 217 25 -
ITEM NO : 2016592
0.75mm HSS S/S JOBBER DRILL
BRAND : SHERWOOD
รหัสสินค้า : SHR0250030C
J100 Series HSS Straight Shank Black Oxide Jobber Drills (Metric) The J100 Series are general purpose HSS straight shank drills with a black oxide finish. Ideal for applications involving steel (including cast steel) cast iron (Including malleable cast iron) as well as nickel, brass aluminium alloys and graphite. Their 118° point allows for precise hole alignment and reliable cutting performance whilst the black oxide coating helps reduce heat by retaining coolant on the tool surface. It also helps reduce the risk of the tool staining. Features and Benefits • General purpose drills with a black oxide finish • Ideal for applications involving steel, iron, nickel, brass, aluminium alloy and graphite • Point angle of 118° for precise holemaking and precision cutting • Black oxide coating helps aid chip flow, reduce heat and prevent staining Standards • Manufactured to BS 328/DIN338RN Typical Applications • Cutting and drilling • Ferrous materials Notes • Available in sizes 0.25mm -20.00mm
ราคา : 509.00 บาท / PK of 10 EA
สต็อกสินค้า คลังสินค้า จำนวน ระยะเวลาจัดส่ง (วัน) ประเทศไทย 80 7 ต่างประเทศ 80 25 -
ITEM NO : 2017228
0.75x100mm O/Ax50mm FL S/S VENTDRILL
BRAND : SHERWOOD
รหัสสินค้า : SHR0252181P
HSS Straight Shank Quick Spiral, Extra Length Vent Drills - Metric Sherwood HSS quick spiral extra length Vent drills are designed for drilling the initial vent hole in aluminium tyre moulds, and are also used in the tyre industry for clean-out work post production where the high helix and extra reach are ideal for the efficient evacuation of waste rubber. Manufactured to works standard. 118° point angle.
ราคา : 308.00 บาท / EA
สต็อกสินค้า คลังสินค้า จำนวน ระยะเวลาจัดส่ง (วัน) ประเทศไทย 0 - ต่างประเทศ 496 90 -
ITEM NO : 2016593
0.78mm HSS S/S JOBBER DRILL
BRAND : SHERWOOD
รหัสสินค้า : SHR0250031D
J100 Series HSS Straight Shank Black Oxide Jobber Drills (Metric) The J100 Series are general purpose HSS straight shank drills with a black oxide finish. Ideal for applications involving steel (including cast steel) cast iron (Including malleable cast iron) as well as nickel, brass aluminium alloys and graphite. Their 118° point allows for precise hole alignment and reliable cutting performance whilst the black oxide coating helps reduce heat by retaining coolant on the tool surface. It also helps reduce the risk of the tool staining. Features and Benefits • General purpose drills with a black oxide finish • Ideal for applications involving steel, iron, nickel, brass, aluminium alloy and graphite • Point angle of 118° for precise holemaking and precision cutting • Black oxide coating helps aid chip flow, reduce heat and prevent staining Standards • Manufactured to BS 328/DIN338RN Typical Applications • Cutting and drilling • Ferrous materials Notes • Available in sizes 0.25mm -20.00mm
ราคา : 509.00 บาท / PK of 10 EA
สต็อกสินค้า คลังสินค้า จำนวน ระยะเวลาจัดส่ง (วัน) ประเทศไทย 3 7 ต่างประเทศ 3 25 -
ITEM NO : 2018377
0.80mm CARBIDE PCB DRILL
BRAND : SHERWOOD
รหัสสินค้า : SHR1583012M
Carbide Printed Circuit Board Drills Solid carbide printed circuit board drills. Suitable for drilling through printed circuit boards. Shank diameter 3.175mm, 38mm overall length. Manufactured to DIN 1899.
ราคา : 310.00 บาท / EA
สต็อกสินค้า คลังสินค้า จำนวน ระยะเวลาจัดส่ง (วัน) ประเทศไทย 148 7 ต่างประเทศ 148 25 -
ITEM NO : 2016594
0.80mm HSS S/S JOBBER DRILL
BRAND : SHERWOOD
รหัสสินค้า : SHR0250032E
J100 Series HSS Straight Shank Black Oxide Jobber Drills (Metric) The J100 Series are general purpose HSS straight shank drills with a black oxide finish. Ideal for applications involving steel (including cast steel) cast iron (Including malleable cast iron) as well as nickel, brass aluminium alloys and graphite. Their 118° point allows for precise hole alignment and reliable cutting performance whilst the black oxide coating helps reduce heat by retaining coolant on the tool surface. It also helps reduce the risk of the tool staining. Features and Benefits • General purpose drills with a black oxide finish • Ideal for applications involving steel, iron, nickel, brass, aluminium alloy and graphite • Point angle of 118° for precise holemaking and precision cutting • Black oxide coating helps aid chip flow, reduce heat and prevent staining Standards • Manufactured to BS 328/DIN338RN Typical Applications • Cutting and drilling • Ferrous materials Notes • Available in sizes 0.25mm -20.00mm
ราคา : 509.00 บาท / PK of 10 EA
สต็อกสินค้า คลังสินค้า จำนวน ระยะเวลาจัดส่ง (วัน) ประเทศไทย 1011 7 ต่างประเทศ 1009 25 -
ITEM NO : 2016595
0.82mm HSS S/S JOBBER DRILL
BRAND : SHERWOOD
รหัสสินค้า : SHR0250033F
J100 Series HSS Straight Shank Black Oxide Jobber Drills (Metric) The J100 Series are general purpose HSS straight shank drills with a black oxide finish. Ideal for applications involving steel (including cast steel) cast iron (Including malleable cast iron) as well as nickel, brass aluminium alloys and graphite. Their 118° point allows for precise hole alignment and reliable cutting performance whilst the black oxide coating helps reduce heat by retaining coolant on the tool surface. It also helps reduce the risk of the tool staining. Features and Benefits • General purpose drills with a black oxide finish • Ideal for applications involving steel, iron, nickel, brass, aluminium alloy and graphite • Point angle of 118° for precise holemaking and precision cutting • Black oxide coating helps aid chip flow, reduce heat and prevent staining Standards • Manufactured to BS 328/DIN338RN Typical Applications • Cutting and drilling • Ferrous materials Notes • Available in sizes 0.25mm -20.00mm
ราคา : 509.00 บาท / PK of 10 EA
สต็อกสินค้า คลังสินค้า จำนวน ระยะเวลาจัดส่ง (วัน) ประเทศไทย 55 7 ต่างประเทศ 55 25 -
ITEM NO : 2018378
0.85mm CARBIDE PCB DRILL
BRAND : SHERWOOD
รหัสสินค้า : SHR1583013N
Carbide Printed Circuit Board Drills Solid carbide printed circuit board drills. Suitable for drilling through printed circuit boards. Shank diameter 3.175mm, 38mm overall length. Manufactured to DIN 1899.
ราคา : 310.00 บาท / EA
สต็อกสินค้า คลังสินค้า จำนวน ระยะเวลาจัดส่ง (วัน) ประเทศไทย 11 7 ต่างประเทศ 11 25 -
ITEM NO : 2016596
0.85mm HSS S/S JOBBER DRILL
BRAND : SHERWOOD
รหัสสินค้า : SHR0250034G
J100 Series HSS Straight Shank Black Oxide Jobber Drills (Metric) The J100 Series are general purpose HSS straight shank drills with a black oxide finish. Ideal for applications involving steel (including cast steel) cast iron (Including malleable cast iron) as well as nickel, brass aluminium alloys and graphite. Their 118° point allows for precise hole alignment and reliable cutting performance whilst the black oxide coating helps reduce heat by retaining coolant on the tool surface. It also helps reduce the risk of the tool staining. Features and Benefits • General purpose drills with a black oxide finish • Ideal for applications involving steel, iron, nickel, brass, aluminium alloy and graphite • Point angle of 118° for precise holemaking and precision cutting • Black oxide coating helps aid chip flow, reduce heat and prevent staining Standards • Manufactured to BS 328/DIN338RN Typical Applications • Cutting and drilling • Ferrous materials Notes • Available in sizes 0.25mm -20.00mm
ราคา : 509.00 บาท / PK of 10 EA
สต็อกสินค้า คลังสินค้า จำนวน ระยะเวลาจัดส่ง (วัน) ประเทศไทย 361 7 ต่างประเทศ 361 25 -
ITEM NO : 2016597
0.88mm HSS S/S JOBBER DRILL
BRAND : SHERWOOD
รหัสสินค้า : SHR0250035H
J100 Series HSS Straight Shank Black Oxide Jobber Drills (Metric) The J100 Series are general purpose HSS straight shank drills with a black oxide finish. Ideal for applications involving steel (including cast steel) cast iron (Including malleable cast iron) as well as nickel, brass aluminium alloys and graphite. Their 118° point allows for precise hole alignment and reliable cutting performance whilst the black oxide coating helps reduce heat by retaining coolant on the tool surface. It also helps reduce the risk of the tool staining. Features and Benefits • General purpose drills with a black oxide finish • Ideal for applications involving steel, iron, nickel, brass, aluminium alloy and graphite • Point angle of 118° for precise holemaking and precision cutting • Black oxide coating helps aid chip flow, reduce heat and prevent staining Standards • Manufactured to BS 328/DIN338RN Typical Applications • Cutting and drilling • Ferrous materials Notes • Available in sizes 0.25mm -20.00mm
ราคา : 509.00 บาท / PK of 10 EA
สต็อกสินค้า คลังสินค้า จำนวน ระยะเวลาจัดส่ง (วัน) ประเทศไทย 56 7 ต่างประเทศ 56 25 -
ITEM NO : 2018379
0.90mm CARBIDE PCB DRILL
BRAND : SHERWOOD
รหัสสินค้า : SHR1583014P
Carbide Printed Circuit Board Drills Solid carbide printed circuit board drills. Suitable for drilling through printed circuit boards. Shank diameter 3.175mm, 38mm overall length. Manufactured to DIN 1899.
ราคา : 310.00 บาท / EA
สต็อกสินค้า คลังสินค้า จำนวน ระยะเวลาจัดส่ง (วัน) ประเทศไทย 170 7 ต่างประเทศ 170 25 -
ITEM NO : 2016598
0.90mm HSS S/S JOBBER DRILL
BRAND : SHERWOOD
รหัสสินค้า : SHR0250036J
J100 Series HSS Straight Shank Black Oxide Jobber Drills (Metric) The J100 Series are general purpose HSS straight shank drills with a black oxide finish. Ideal for applications involving steel (including cast steel) cast iron (Including malleable cast iron) as well as nickel, brass aluminium alloys and graphite. Their 118° point allows for precise hole alignment and reliable cutting performance whilst the black oxide coating helps reduce heat by retaining coolant on the tool surface. It also helps reduce the risk of the tool staining. Features and Benefits • General purpose drills with a black oxide finish • Ideal for applications involving steel, iron, nickel, brass, aluminium alloy and graphite • Point angle of 118° for precise holemaking and precision cutting • Black oxide coating helps aid chip flow, reduce heat and prevent staining Standards • Manufactured to BS 328/DIN338RN Typical Applications • Cutting and drilling • Ferrous materials Notes • Available in sizes 0.25mm -20.00mm
ราคา : 509.00 บาท / PK of 10 EA
สต็อกสินค้า คลังสินค้า จำนวน ระยะเวลาจัดส่ง (วัน) ประเทศไทย 72 7 ต่างประเทศ 72 25 -
ITEM NO : 2018380
0.95mm CARBIDE PCB DRILL
BRAND : SHERWOOD
รหัสสินค้า : SHR1583015Q
Carbide Printed Circuit Board Drills Solid carbide printed circuit board drills. Suitable for drilling through printed circuit boards. Shank diameter 3.175mm, 38mm overall length. Manufactured to DIN 1899.
ราคา : 310.00 บาท / EA
สต็อกสินค้า คลังสินค้า จำนวน ระยะเวลาจัดส่ง (วัน) ประเทศไทย 83 7 ต่างประเทศ 83 25 -
ITEM NO : 2016599
0.95mm HSS S/S JOBBER DRILL
BRAND : SHERWOOD
รหัสสินค้า : SHR0250038L
J100 Series HSS Straight Shank Black Oxide Jobber Drills (Metric) The J100 Series are general purpose HSS straight shank drills with a black oxide finish. Ideal for applications involving steel (including cast steel) cast iron (Including malleable cast iron) as well as nickel, brass aluminium alloys and graphite. Their 118° point allows for precise hole alignment and reliable cutting performance whilst the black oxide coating helps reduce heat by retaining coolant on the tool surface. It also helps reduce the risk of the tool staining. Features and Benefits • General purpose drills with a black oxide finish • Ideal for applications involving steel, iron, nickel, brass, aluminium alloy and graphite • Point angle of 118° for precise holemaking and precision cutting • Black oxide coating helps aid chip flow, reduce heat and prevent staining Standards • Manufactured to BS 328/DIN338RN Typical Applications • Cutting and drilling • Ferrous materials Notes • Available in sizes 0.25mm -20.00mm
ราคา : 509.00 บาท / PK of 10 EA
สต็อกสินค้า คลังสินค้า จำนวน ระยะเวลาจัดส่ง (วัน) ประเทศไทย 99 7 ต่างประเทศ 99 25 -
ITEM NO : 2016600
0.98mm HSS S/S JOBBER DRILL
BRAND : SHERWOOD
รหัสสินค้า : SHR0250039M
J100 Series HSS Straight Shank Black Oxide Jobber Drills (Metric) The J100 Series are general purpose HSS straight shank drills with a black oxide finish. Ideal for applications involving steel (including cast steel) cast iron (Including malleable cast iron) as well as nickel, brass aluminium alloys and graphite. Their 118° point allows for precise hole alignment and reliable cutting performance whilst the black oxide coating helps reduce heat by retaining coolant on the tool surface. It also helps reduce the risk of the tool staining. Features and Benefits • General purpose drills with a black oxide finish • Ideal for applications involving steel, iron, nickel, brass, aluminium alloy and graphite • Point angle of 118° for precise holemaking and precision cutting • Black oxide coating helps aid chip flow, reduce heat and prevent staining Standards • Manufactured to BS 328/DIN338RN Typical Applications • Cutting and drilling • Ferrous materials Notes • Available in sizes 0.25mm -20.00mm
ราคา : 509.00 บาท / PK of 10 EA
สต็อกสินค้า คลังสินค้า จำนวน ระยะเวลาจัดส่ง (วัน) ประเทศไทย 0 - ต่างประเทศ 0 - -
ITEM NO : 2016246
010 P20/P30 BRAZED TOOL
BRAND : KENNEDY
รหัสสินค้า : KEN1000100K
Straight Round Nosed Turning Tools - P30 Kennedy Brazed Tip Turning & Boring Tools are manufactured in three standard grades. (All sizes are nominal). Manufactured to ISO DIN BHMA Standards. P40: Roughing to heavy roughing of steel and steel castings using heavy feeds and low to medium cutting speeds. Also used under unfavourable conditions, particularly where intermittent cutting is involved. This grade is also suitable for planing operations and for machining manganese steel. P30: Carbide tipped tools are suitable for heavy duty turning and boring on all classes of steel. Suitable also for interrupted cutting and machining at low speeds and heavy feeds. K20: General-purpose tools for most applications. Ideal for machining cast iron, non-ferrous metals, bakelite etc. Combines wear resistance with toughness when rough turning at moderate cutting speeds. Suitable for high feed rates.
ราคา : 1,260.00 บาท / EA
สต็อกสินค้า คลังสินค้า จำนวน ระยะเวลาจัดส่ง (วัน) ประเทศไทย 34 7 ต่างประเทศ 34 25 -
ITEM NO : 2016248
012 K20 BRAZED TOOL
BRAND : KENNEDY
รหัสสินค้า : KEN1000150K
Straight Round Nosed Turning Tools - K20 Kennedy Brazed Tip Turning & Boring Tools are manufactured in three standard grades. (All sizes are nominal). Manufactured to ISO DIN BHMA Standards. K20: General-purpose tools for most applications. Ideal for machining cast iron, non-ferrous metals, bakelite etc. Combines wear resistance with toughness when rough turning at moderate cutting speeds. Suitable for high feed rates.
ราคา : 1,260.00 บาท / EA
สต็อกสินค้า คลังสินค้า จำนวน ระยะเวลาจัดส่ง (วัน) ประเทศไทย 15 7 ต่างประเทศ 15 25 -
ITEM NO : 2016247
012 P20/P30 BRAZED TOOL
BRAND : KENNEDY
รหัสสินค้า : KEN1000140K
Straight Round Nosed Turning Tools - P30 Kennedy Brazed Tip Turning & Boring Tools are manufactured in three standard grades. (All sizes are nominal). Manufactured to ISO DIN BHMA Standards. P40: Roughing to heavy roughing of steel and steel castings using heavy feeds and low to medium cutting speeds. Also used under unfavourable conditions, particularly where intermittent cutting is involved. This grade is also suitable for planing operations and for machining manganese steel. P30: Carbide tipped tools are suitable for heavy duty turning and boring on all classes of steel. Suitable also for interrupted cutting and machining at low speeds and heavy feeds. K20: General-purpose tools for most applications. Ideal for machining cast iron, non-ferrous metals, bakelite etc. Combines wear resistance with toughness when rough turning at moderate cutting speeds. Suitable for high feed rates.
ราคา : 1,260.00 บาท / EA
สต็อกสินค้า คลังสินค้า จำนวน ระยะเวลาจัดส่ง (วัน) ประเทศไทย 14 7 ต่างประเทศ 14 25 -
ITEM NO : 2016250
016 K20 BRAZED TOOL
BRAND : KENNEDY
รหัสสินค้า : KEN1000200K
Straight Round Nosed Turning Tools - K20 Kennedy Brazed Tip Turning & Boring Tools are manufactured in three standard grades. (All sizes are nominal). Manufactured to ISO DIN BHMA Standards. K20: General-purpose tools for most applications. Ideal for machining cast iron, non-ferrous metals, bakelite etc. Combines wear resistance with toughness when rough turning at moderate cutting speeds. Suitable for high feed rates.
ราคา : 1,816.00 บาท / EA
สต็อกสินค้า คลังสินค้า จำนวน ระยะเวลาจัดส่ง (วัน) ประเทศไทย 2 7 ต่างประเทศ 125 25 -
ITEM NO : 2016249
016 P20/P30 BRAZED TOOL
BRAND : KENNEDY
รหัสสินค้า : KEN1000190K
Straight Round Nosed Turning Tools - P30 Kennedy Brazed Tip Turning & Boring Tools are manufactured in three standard grades. (All sizes are nominal). Manufactured to ISO DIN BHMA Standards. P40: Roughing to heavy roughing of steel and steel castings using heavy feeds and low to medium cutting speeds. Also used under unfavourable conditions, particularly where intermittent cutting is involved. This grade is also suitable for planing operations and for machining manganese steel. P30: Carbide tipped tools are suitable for heavy duty turning and boring on all classes of steel. Suitable also for interrupted cutting and machining at low speeds and heavy feeds. K20: General-purpose tools for most applications. Ideal for machining cast iron, non-ferrous metals, bakelite etc. Combines wear resistance with toughness when rough turning at moderate cutting speeds. Suitable for high feed rates.
ราคา : 1,816.00 บาท / EA
สต็อกสินค้า คลังสินค้า จำนวน ระยะเวลาจัดส่ง (วัน) ประเทศไทย 147 7 ต่างประเทศ 147 25 -
ITEM NO : 3105567
01700 B13-13 BENCH PILLAR DRILL230V
BRAND : SINTRA
รหัสสินค้า : SIP2770762K
01700 - Bench Mounted Pillar Drill - 230V (13amp) This bench mounted pillar Drill has a cast iron construction with an integrated magnetic NVR switch, thermally-protected motor, and soft-grip handles. Features: •Integrated magnetic NVR (No Volt Release) Stop/Start & Emergency Stop switch •Telescopic drill guard •Quick and easy speed adjustment •Sturdy cast iron table and base •Thermal cut out protection for prolonged life of the motor Typical Applications: •Suited to drilling both hard and soft woods as well as metals and plastics within the manufacturing/engineering environments
ราคา : 17,547.00 บาท / EA
สต็อกสินค้า คลังสินค้า จำนวน ระยะเวลาจัดส่ง (วัน) ประเทศไทย 1 7 ต่างประเทศ 1 25
สินค้าที่ดูล่าสุด
-
ITEM NO : 2012929
15mm SPARK RESISTANT SOCKET 1/2SQ. DR Al-Br
BRAND : KENNEDY
รหัสสินค้า : KEN5757265K
Aluminium-Bronze Spark-Resistant Sockets, 1/2" Drive Sockets 12 point bi-hexagon. Spark-resistant tools are used to eliminate the chances of accidental fires or explosions in potentially combustible or explosive environments. They resist the sparks that a standard tool could potentially create when striking hard surfaces. The use of spark resistant tools is essential in many industrial applications such as petroleum and chemical manufacturing, spray booth operations, the marine industry, the mining industry, the paper industries, or any location where flammable vapours or combustible residues are present. Aluminium-bronze spark resistant safety tools are manufactured to 25HRC and offer a breaking strain of 75 - 85kgf/mm2. Spark-resistant tools must be maintained with special care. Frequent cleaning/re-dressing to remove ferrous particles or contaminants, which may impair the spark-resistant properties, is essential.
ราคา : 1,643.00 บาท / EA
สต็อกสินค้า คลังสินค้า จำนวน ระยะเวลาจัดส่ง (วัน) ประเทศไทย 7 7 ต่างประเทศ 7 25 -
ITEM NO : 2075742
Wall Clock Analog Battery
BRAND : UNBRANDED
รหัสสินค้า : 2CHZ8
Wall Clock Analog Clock Movement Type Manual Arabic Shape Round Overall Dia 12 In. Face Dia 11-3/8 In. Frame Color Black Basic Power Source Battery Mount Wall Features Low Profile Case Material Plastic Case Color Black Face Color White Time Adjustment Manual Adjust Lens Material Glass Depth 1-1/2 In. Specific Power Source (1) AA Battery
ราคา : 2,113.00 บาท / EA
-
ITEM NO : 2079883
Tee Feed Through 20A 6-Wire
BRAND : HUBBELL WIRING DEVICE-KELLEMS
รหัสสินค้า : TX2306002306T00
Tee Max Voltage 600 VAC Amps AC 20 Conductor Material Copper Gauge/Conductor 12/10 Plug End Male/Female/Female Plug Type 6-Wire Receptacle Male/Female/Female Enclosure Type NEMA 4X For Use With 2DZU4 2DZU5 2DZU6 2DZU7 2DZU8 Cable Assemblies 2DZV4 Female Receptacle and 2DZV8 Male Receptacle
ราคา : 11,540.00 บาท / EA
-
ITEM NO : 2631826
Table Clamp Pivot Lock Clamp 1-3/16 inD
BRAND : BESSEY
รหัสสินค้า : TWV16-20-15-2K
Table Clamp Depth 1-3/16 In. Number of Surfaces 1 For Use With 16mm Matrix Welding Tables Diameter 5/8 In. Features Pivot Lock Clamp
ราคา : 3,864.00 บาท / EA
-
ITEM NO : 2750845
Mobile Bench Table 20in Bench H 12 Seats
BRAND : NATIONAL PUBLIC SEATING
รหัสสินค้า : MTFB12-MDPEPC-GYGY
Mobile Bench Table Seats 12 Shape Rectangle Width 145 In. Depth 56 In. Height 29 In. Tabletop Color Family Gray Tabletop Color Gray Table Material MDF Assembled/Unassembled Assembled Seat Height 17 In. Surface Material High Pressure Laminate Frame Material Steel Caster Type (4) Swivel Chair Color Gray Edge Color Black Edge Type Protect Edge Frame Color Black Top Thickness 3/4 In. Series MTFB
ราคา : 190,696.00 บาท / EA
