Categories 4
สินค้าที่พบ
-
ITEM NO : 2119174
Foam Sanding Pads 4-1/2in x 82ft 1000G
BRAND : NORTON
รหัสสินค้า : 66623357616
Sanding Foam Pad Roll Length 5 1/2 In. Width 4-1/2 In. 1000 Grit Aluminum Oxide Abrasive Material Sheets per Roll 178 Grade Ultra Fine Color Tan
ราคา : 12,571.00 บาท / EA
-
ITEM NO : 2119164
Foam Sanding Pads 4-1/2in x 82ft 120G
BRAND : NORTON
รหัสสินค้า : 78072735316
Sanding Foam Pad Roll Length 5 1/2 In. Width 4-1/2 In. 120 Grit Aluminum Oxide Abrasive Material Sheets per Roll 178 Grade Fine Color Tan
ราคา : 12,636.00 บาท / EA
-
ITEM NO : 2119165
Foam Sanding Pads 4-1/2in x 82ft 150G
BRAND : NORTON
รหัสสินค้า : 78072757584
Sanding Foam Pad Roll Length 5 1/2 In. Width 4-1/2 In. 150 Grit Aluminum Oxide Abrasive Material Sheets per Roll 178 Grade Fine Color Tan
ราคา : 12,932.00 บาท / EA
-
ITEM NO : 2119166
Foam Sanding Pads 4-1/2in x 82ft 180G
BRAND : NORTON
รหัสสินค้า : 78072757599
Sanding Foam Pad Roll Length 5 1/2 In. Width 4-1/2 In. 180 Grit Aluminum Oxide Abrasive Material Sheets per Roll 178 Grade Very Fine Color Tan
ราคา : 12,786.00 บาท / EA
-
ITEM NO : 2119167
Foam Sanding Pads 4-1/2in x 82ft 220G
BRAND : NORTON
รหัสสินค้า : 78072757600
Sanding Foam Pad Roll Length 5 1/2 In. Width 4-1/2 In. 220 Grit Aluminum Oxide Abrasive Material Sheets per Roll 178 Grade Very Fine Color Tan
ราคา : 12,842.00 บาท / EA
-
ITEM NO : 2119169
Foam Sanding Pads 4-1/2in x 82ft 320G
BRAND : NORTON
รหัสสินค้า : 66623357606
Sanding Foam Pad Roll Length 5 1/2 In. Width 4-1/2 In. 320 Grit Aluminum Oxide Abrasive Material Sheets per Roll 178 Grade Very Fine Color Tan
ราคา : 12,801.00 บาท / EA
-
ITEM NO : 2119170
Foam Sanding Pads 4-1/2in x 82ft 400G
BRAND : NORTON
รหัสสินค้า : 66623357608
Sanding Foam Pad Roll Length 5 1/2 In. Width 4-1/2 In. 400 Grit Aluminum Oxide Abrasive Material Sheets per Roll 178 Grade Super Fine Color Tan
ราคา : 12,736.00 บาท / EA
-
ITEM NO : 2119171
Foam Sanding Pads 4-1/2in x 82ft 500G
BRAND : NORTON
รหัสสินค้า : 66623357611
Sanding Foam Pad Roll Length 5 1/2 In. Width 4-1/2 In. 500 Grit Aluminum Oxide Abrasive Material Sheets per Roll 178 Grade Super Fine Color Tan
ราคา : 12,611.00 บาท / EA
-
ITEM NO : 2119172
Foam Sanding Pads 4-1/2in x 82ft 600G
BRAND : NORTON
รหัสสินค้า : 66623357612
Sanding Foam Pad Roll Length 5 1/2 In. Width 4-1/2 In. 600 Grit Aluminum Oxide Abrasive Material Sheets per Roll 178 Grade Super Fine Color Tan
ราคา : 12,676.00 บาท / EA
-
ITEM NO : 2119173
Foam Sanding Pads 4-1/2in x 82ft 800G
BRAND : NORTON
รหัสสินค้า : 66623357613
Sanding Foam Pad Roll Length 5 1/2 In. Width 4-1/2 In. 800 Grit Aluminum Oxide Abrasive Material Sheets per Roll 178 Grade Ultra Fine Color Tan
ราคา : 12,842.00 บาท / EA
สินค้าที่ดูล่าสุด
-
ITEM NO : 2000659
12x20mm CYL. CARBIDE PLAIN END BURR CUT 9
BRAND : KENNEDY
รหัสสินค้า : KEN2100780K
Carbide Burrs - Cylindrical Plain End Cylindrical Plain End. All sizes are nominal. Sizes marked * are 3mm shank, all others are 6mm shank. Cut Numbers: Cut 3 - Rapid Cut For use on softer non-ferrous and plastic materials, i.e. aluminium, fibreglass, plastics, hard rubber and zinc alloy. Cut 9 - Chipbreaker Chipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron. Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc. up to HRC65 hardness. Please note: Workpiece and tools should always be steady and well supported. Carbide burrs are not suitable for 'milling' large amounts of material, they are for light stock removal at high rpm's 'LOW FEED - HIGH SPEED'. Always ensure that at least 70% of the shank length is clamped by the collet or chuck of the tool being used. Always ensure that the tool is rated to the recommended operating speed of the burr.
ราคา : 1,169.00 บาท / EA
สต็อกสินค้า คลังสินค้า จำนวน ระยะเวลาจัดส่ง (วัน) ประเทศไทย 29 7 ต่างประเทศ 29 25 -
ITEM NO : 2000821
12.7x11mm BALL SHAPE CARBIDE BURR CUT-9
BRAND : YORK
รหัสสินค้า : YRK2106329K
Carbide Rotary Burrs - Ball Shape Ball Shape. All sizes are nominal with a 6mm shank unless other wise stated. Cut Numbers: Cut 6 - Double Cut. Crosscut and double cut to improve control and chipbreaks. Manufactured from high grade tungsten carbide for general-purpose use. Cut 9 - Chipbreaker Chipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron. Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc. up to HRC65 hardness. Please note: • Work piece and tools should always be steady and well supported. • Carbide burrs are not suitable for 'milling' large amounts of material, they are for light stock removal and high revolutions 'LOW FEED - HIGH SPEED'. • Always ensure that at least 70% of the shank length is clamped by the collet or chuck of the tool being used. • Always ensure that the tool is rated to the recommended operating speed of the burr.
ราคา : 1,266.00 บาท / EA
สต็อกสินค้า คลังสินค้า จำนวน ระยะเวลาจัดส่ง (วัน) ประเทศไทย 230 7 ต่างประเทศ 230 25 -
ITEM NO : 2208407
Contour Sanding Sponge SF PK20
BRAND : NORTON
รหัสสินค้า : 7660703076
Contour Sanding Sponge Sides Dual Abrasive Material Aluminum Oxide Grade Super Fine Length 5-1/2 In. Width 4-1/2 In. Thickness 3/16 In. Color Gray Package Quantity 20
ราคา : 3,678.00 บาท / PK of 20 PK
-
ITEM NO : 2591982
Air Cooled Backing Pad 7 in.
BRAND : CENTURY DRILL AND TOOL
รหัสสินค้า : 77195
Air Cooled Backing Pad 7 in.
ราคา : 1,396.00 บาท / EA
-
ITEM NO : 3074593
Adhesive/PSA Disc Backup Pad 5D
BRAND : NORTON
รหัสสินค้า : 63642506131
Disc Backup Pad Disc Diameter 5 In. Face Mounting Type Adhesive/PSA Back Mounting Type Threaded Shaft Back Mounting Size 5/16 In.-24 Max RPM 10 000 Density Medium Vacuum Hole Design Non-Vacuum Thickness 1/2 In. Body Material Foam
ราคา : 1,666.00 บาท / EA
