Categories 4
สินค้าที่พบ
-
ITEM NO : 2633364
Cover Plate Plated 2-3/8 Outside Dia
BRAND : UNBRANDED
รหัสสินค้า : 19-161-4
One Hole Cover Plate Color Dark Gray Brass Plated Finish Material Steel Outside Dia 2-3/8 In. For Use With 1-3/4 in Door Thickness Hardware Included
ราคา : 4,102.00 บาท / EA
-
ITEM NO : 2633370
Cover Plate Plated 2-3/8 Outside Dia
BRAND : UNBRANDED
รหัสสินค้า : 19-169-4
Two Hole Cover Plate Color Silver Brass Plated Finish Material Steel Outside Dia 2-3/8 In. For Use With 1-3/4 in Door Thickness Hardware Not Included
ราคา : 2,860.00 บาท / EA
-
ITEM NO : 2633381
Cover Plate Plated 4-1/2 Outside Dia
BRAND : UNBRANDED
รหัสสินค้า : 19-174-4
One Hole Cover Plate Color Silver Brass Plated Finish Material Aluminum Outside Dia 4-1/2 In. For Use With 1-3/4 in Door Thickness Hardware Included
ราคา : 1,319.00 บาท / EA
-
ITEM NO : 2221393
Cylinder Hole Cover Brass O.D. 2 5/8 In
BRAND : UNBRANDED
รหัสสินค้า : 1XMU7
Cylinder Hole Cover Plate Color Brass Polished Brass Finish Material Steel Outside Dia 2-5/8 In. For Use With 1-3/4 in Door Thickness Hardware Included
ราคา : 804.00 บาท / EA
-
ITEM NO : 2221392
Cylinder Hole Cover Plate Brass
BRAND : UNBRANDED
รหัสสินค้า : 1XMU6
Cylinder Hole Cover Plate Color Brass Polished Brass Finish Material Brass Outside Dia 1-7/8 In. For Use With 1-3/4 in Door Thickness Hardware Included
ราคา : 2,922.00 บาท / EA
สินค้าที่ดูล่าสุด
-
ITEM NO : 2000722
10x4mm CONICAL 90DEG. CARBIDE BURR CUT 9
BRAND : KENNEDY
รหัสสินค้า : KEN2108930K
Carbide Burrs - Conical 90° Conical 90° Inc. Angle. All sizes are nominal. Sizes marked * are 3mm shank, all others are 6mm shank. Cut Numbers: Cut 9 - Chipbreaker Chipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron. Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc. up to HRC65 hardness. Please note: Workpiece and tools should always be steady and well supported. Carbide burrs are not suitable for 'milling' large amounts of material, they are for light stock removal at high rpm's 'LOW FEED - HIGH SPEED'. Always ensure that at least 70% of the shank length is clamped by the collet or chuck of the tool being used. Always ensure that the tool is rated to the recommended operating speed of the burr.
ราคา : 838.00 บาท / EA
สต็อกสินค้า คลังสินค้า จำนวน ระยะเวลาจัดส่ง (วัน) ประเทศไทย 20 7 ต่างประเทศ 20 25
