Categories 4
Product Result
-
ITEM NO : 2886387
Compressed Air Dryer 25 cfm 115V
BRAND : SPEEDAIRE
PART NO : 53RG65
Compressed Air Dryer Regenerative Desiccant ISO Class 2 25 CFM Dew Point (Deg. F) -40 For Air Comp. HP 7.5 115 Voltage 1.1 Full Load Amps 60 Hz 1 Phase Inlet Flow Capacity @ 100 PSI 25 Outlet Flow Capacity @ 100 PSI 25.0 1/2 Inlet/Outlet NPTF (In.) Max Working Pressure (PSI) 232 Min Working Pressure (PSI) 58 Max Inlet Temp (Deg. F) 122 Max Ambient Temp (F) 122 Pressure Drop 2 psi 5 minute Cycle Electronic Timer Heavy Duty Exhaust Muffler Removable Cleanable Diffuser
price : 252,800.00 Baht / EA
-
ITEM NO : 2886388
Compressed Air Dryer 30 cfm 115V
BRAND : SPEEDAIRE
PART NO : 53RG66
Compressed Air Dryer Regenerative Desiccant ISO Class 2 30 CFM Dew Point (Deg. F) -40 For Air Comp. HP 7.5 115 Voltage 1.1 Full Load Amps 60 Hz 1 Phase Inlet Flow Capacity @ 100 PSI 30 Outlet Flow Capacity @ 100 PSI 30.0 1/2 Inlet/Outlet NPTF (In.) Max Working Pressure (PSI) 232 Min Working Pressure (PSI) 58 Max Inlet Temp (Deg. F) 122 Max Ambient Temp (F) 122 Pressure Drop 2 psi 5 minute Cycle Electronic Timer Heavy Duty Exhaust Muffler Removable Cleanable Diffuser
price : 260,069.00 Baht / EA
recent products
-
ITEM NO : 2000738
10mmx19mm CYLINDRICAL ENDCUT CARBIDE BURR DBL CUT
BRAND : YORK
PART NO : YRK2100246K
Carbide Rotary Burrs - Cylindrical-End Cutting Cylindrical-End Cutting All sizes are nominal with a 6mm shank unless other wise stated. Cut Numbers: Cut 3 - Rapid Cut. for use on softer non ferrous and plastic materials, i.e aluminium, fibreglass, plastics, hard rubber and zinc alloy, Cut 6 - Double Cut. Crosscut and double cut to improve control and chipbreaks. Manufactured from high grade tungsten carbide for general-purpose use. Cut 9 - Chipbreaker Chipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron. Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc. up to HRC65 hardness. Please note: • Work piece and tools should always be steady and well supported. • Carbide burrs are not suitable for 'milling' large amounts of material, they are for light stock removal and high revolutions 'LOW FEED - HIGH SPEED'. • Always ensure that at least 70% of the shank length is clamped by the collet or chuck of the tool being used. • Always ensure that the tool is rated to the recommended operating speed of the burr.
price : 909.00 Baht / EA
Stock Location QTY Lead time (Days) Local Thailand 46 7 International 45 25 -
ITEM NO : 3332447
Impact Driver Boot
BRAND : MILWAUKEE
PART NO : 49-16-3453
Tool Boot
price : 1,925.00 Baht / EA
-
ITEM NO : 2380372
Outrigger Pad 18 x 18 x 1-1/2 In.
BRAND : TITAN
PART NO : 14473
Outrigger Pad Polymer Pad Length 18 In. Pad Width 18 in Pad Thickness 1 1/2 in
price : 22,801.00 Baht / EA
-
ITEM NO : 2868253
Pick Hammer Short Pick/Bullet Point 6 W
BRAND : KEYSCO TOOLS
PART NO : 55330AL
Pick Hammer Short Pick/Bullet Point Overall Length 12 In. Overall Width 4 In. Heat Treated Carbon Head Material Hickory Handle Material
price : 3,232.00 Baht / EA