Categories 4
Product Result
-
ITEM NO : 2071054
Can Tumblers 2HP Single Phase 23rpm 115V
BRAND : MORSE DRUM
PART NO : 2-305-1
Can Tumbler 1/4 HP Phase 1 115VAC Drum Speed 23 rpm Number of Drums 2 Full Drum Capacity 100 lb. 60 Hz 5 Full Load Amps Motor Enclosure TEFC with 1 to 60 Minute Timer Overall Length 50 In. Overall Width 28 In. Overall Height 33 In. Includes Timer
price : 220,799.00 Baht / EA
recent products
-
ITEM NO : 3105414
1" DRIVE H/D IN-LINE IMPACTWRENCH
BRAND : KOBE
PART NO : KBE2701630B
IWS100X - 1" Heavy-Duty In-Line Air Impact Wrench IWS100X - 1" square drive. Suitable for industrial and commercial production and assembly applications. Side handle for two-handed operation. Top mounted spring balance loop. Easy to use forward/reverse switch and three position power regulator. Top venting exhaust. Oiling points for daily maintenance. Bolt Capacity: M33 Working torque: 2,030 Nm Maximum torque: 2,300Nm Safe working pressure: 6.2bar / 90psi. Air inlet thread: 1/2" NPT. Minimum air hose size (ID): 1/2" (13mm). Air pressure: 6.3bar/90 psi. Air consumption: 7.0 cfm. Sound pressure level: 96 dBA. Sound power level: 101.67 dBA. Vibration level: 6.0 m/s². Overall length: 448mm.
price : 26,100.00 Baht / EA
Stock Location QTY Lead time (Days) Local Thailand 92 7 International 90 25 -
ITEM NO : 2015817
1/4" BSP 90 DEG ANGLE HYDRAULIC NIPPLES
BRAND : KENNEDY
PART NO : KEN5410710K
Hydraulic Grease Nipples - Imperial 90° Type For use with Kennedy grease guns and all other hydraulic grease equipment.
price : 135.00 Baht / EA
Stock Location QTY Lead time (Days) Local Thailand 3714 7 International 3714 25 -
ITEM NO : 2022209
1.1/16" A/F OPEN JAW SLOGGINGWRENCH
BRAND : KENNEDY
PART NO : KEN5806500K
Imperial Open Ended Slogging Spanners, Chrome Satin Hardened Steel Forged and hardened steel. Flat striking faces to allow hammer blows to be used to loosen or tighten stubborn fasteners. To DIN 133.
price : 887.00 Baht / EA
Stock Location QTY Lead time (Days) Local Thailand 8 7 International 8 25 -
ITEM NO : 2022220
1.3/4" A/F OPEN JAW SLOGGINGWRENCH
BRAND : KENNEDY
PART NO : KEN5806610K
Forged and hardened steel. Flat striking faces to allow hammer blows to be used to loosen or tighten stubborn fasteners. To DIN 133. *This product is in discontinued phase. Offer valid while stocks last!.
price : 3,327.00 Baht / EA
Stock Location QTY Lead time (Days) Local Thailand 2 7 International 2 25 -
ITEM NO : 2022276
1.5/16" A/F RING SLOGGING WRENCH
BRAND : KENNEDY
PART NO : KEN5807540K
Imperial Ring Slogging Spanners, Chrome Satin Hardened Steel Manufactured from forged and hardened steel with machined drive faces to ensure good contact with the fastener. With flat striking faces to allow hammer blows to be used to loosen or tighten stubborn fasteners. Manufactured to DIN 7444.
price : 1,160.00 Baht / EA
Stock Location QTY Lead time (Days) Local Thailand 19 7 International 19 25
