Categories 4
Product Result
-
ITEM NO : 3276035
Acceleometer Vibration Probe 2.2x0.9
BRAND : TEST PRODUCTS INTL.
PART NO : A9014
Acceleometer Vibration Probe (2) Pins
price : 7,195.00 Baht / EA
-
ITEM NO : 3276034
Anchor Stud 0.7 dia SS
BRAND : TEST PRODUCTS INTL.
PART NO : A9033
Anchor Stud
price : 458.00 Baht / EA
-
ITEM NO : 3069304
Connecting Stud
BRAND : MONARCH
PART NO : 6480-033
Hex Socket Connecting Stud 4-28 x 1/2 Inch
price : 609.00 Baht / EA
-
ITEM NO : 3069305
Headphones
BRAND : MONARCH
PART NO : 6480-040
Passive Noise Reduction Headphones 8 Foot Cable
price : 6,031.00 Baht / EA
-
ITEM NO : 3275405
MS Connector to Flying Leads 32.8ft.
BRAND : TEST PRODUCTS INTL.
PART NO : A9028
Cable 10 m (2) Pins Blue Flying Lead
price : 3,949.00 Baht / EA
-
ITEM NO : 3276442
MS Connector to Flying Leads 49.2ft.
BRAND : TEST PRODUCTS INTL.
PART NO : A9029
Cable 15 m (2) Pins Blue Flying Lead
price : 6,391.00 Baht / EA
-
ITEM NO : 3275404
Protective Boot 6-3/4x2-1/2X1-1/2
BRAND : TEST PRODUCTS INTL.
PART NO : A9086
Protective Boot Rubber
price : 2,510.00 Baht / EA
-
ITEM NO : 2957568
Replacement Vibration Meter 10Hz to 1KHz
BRAND : REED INSTRUMENTS
PART NO : R7000SD-PROBE
Replacement Vibration Meter 50 In. RMS Peak Min/Max Frequency Range (Hz) 10 to 1 kHz 0.5 to 199.9m/s2 0.05 to 20.39g 2 to 656ft/s2 Acceleration Range Steel Plastic Rubber For Use With Mfr No R7000SD
price : 27,908.00 Baht / EA
recent products
-
ITEM NO : 2000725
13x12mm INVERTED CONE CARBIDE BURR CUT 9
BRAND : KENNEDY
PART NO : KEN2109320K
Carbide Burrs - Inverted Cone Inverted Cone. All sizes are nominal. Sizes marked * are 3mm shank, all others are 6mm shank. Cut Numbers: Cut 9 - Chipbreaker Chipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron. Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc. up to HRC65 hardness. Please note: Workpiece and tools should always be steady and well supported. Carbide burrs are not suitable for 'milling' large amounts of material, they are for light stock removal at high rpm's 'LOW FEED - HIGH SPEED'. Always ensure that at least 70% of the shank length is clamped by the collet or chuck of the tool being used. Always ensure that the tool is rated to the recommended operating speed of the burr.
price : 1,302.00 Baht / EA
Stock Location QTY Lead time (Days) Local Thailand 253 7 International 253 25 -
ITEM NO : 2239702
Connector 3R 4X 12 Male Ylw 2/0 to 4/0
BRAND : HUBBELL
PART NO : HBL400MY
Connector NEMA Rating 3R 4X 12 Series 16 Amps AC/DC 400AC/DC Single Pole Device Style Taper Nose Cable Range 2/0 to 4/0 Voltage Rating 600VAC/250VDC Terminal Connection Double Set Screw Male/Female Male Color Yellow Material Thermoplastic Elastomer Conductor Material Brass Fits UL1691 Power Terminals Wire Size 2/0 to 4/0 Standards UL cUL
price : 2,366.00 Baht / EA
-
ITEM NO : 2256289
Brake Pad Gauge 3 In.
BRAND : OTC
PART NO : 6596
Brake Pad Gauge Length 3 In. Allows For A Definitve Measurement Of Brake Pads To Determine Remaining Life. For Use With Automobiles
price : 2,422.00 Baht / EA
-
ITEM NO : 2308565
Band Heater 2-1/2 in Dia Steel
BRAND : TEMPCO
PART NO : NHW00186
Band Heater Heater Voltage 120VAC Inside Dia 2-1/2 In. Width 1-1/2 In. Material Mica Insulated Steel Inside SS Outside Max Temp 900 Degrees F Terminals None Termination 12 in Lead Wire with 10 in SS Braid 350 Watts Watt Density 34 sq. in. 2.92 Amps Width Tolerance +/-1/16 In. Features Rust Resistant
price : 1,892.00 Baht / EA
-
ITEM NO : 2465655
Mug Fenwick 8 oz Cranberry PK48
BRAND : CARLISLE DINEX
PART NO : DX500061
H2192 Mug Fenwick Size 8 oz. Overall Height 3-1/2 In. Diameter 3-1/2 In. Material Urethane Foam Color Cranberry
price : 16,191.00 Baht / PK of 48 PK
