Welcome to QTEC-TECHNOLOGY.com
Logging to website


Please wait

close
 
{{products.length}}
  • {{data.name}}
  • {{data.name}}
 
{{products.length}}
  • {{data.name}}
  • {{data.name}}
You are here:




Product Result




recent products

  • 2000819

    11x9.5mm BALL SHAPE CARBIDE BURR CUT-9

    BRAND : YORK

    PART NO : YRK2106249K

    Carbide Rotary Burrs - Ball Shape Ball Shape. All sizes are nominal with a 6mm shank unless other wise stated. Cut Numbers: Cut 6 - Double Cut. Crosscut and double cut to improve control and chipbreaks. Manufactured from high grade tungsten carbide for general-purpose use. Cut 9 - Chipbreaker Chipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron. Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc. up to HRC65 hardness. Please note: • Work piece and tools should always be steady and well supported. • Carbide burrs are not suitable for 'milling' large amounts of material, they are for light stock removal and high revolutions 'LOW FEED - HIGH SPEED'. • Always ensure that at least 70% of the shank length is clamped by the collet or chuck of the tool being used. • Always ensure that the tool is rated to the recommended operating speed of the burr.

    More Info

    price : 1,055.00 Baht / EA

    Stock
    Location QTY Lead time (Days)
    Local Thailand 125 7
    International 124 25
    add to cart
  • 3296933

    Leaded Hex Bar Carbon Steel 1 ft

    BRAND : GRAINGER APPROVED

    PART NO : 14H.25-12

    Rectangular Bar Stock Thickness (Decimal) 0.25 in Width - Carbon Steel 1/4 in Length - Carbon Steel 1 ft Unpolished Finish - Carbon Steel Alloy Type - Carbon Steel 12L14 Grade - Carbon Steel Low Carbon Steel ASTM A108 ASTM A29 Carbon Steel Standards Temper Cold Finish Thickness Tolerance +0.000/-0.003 in Width Tolerance +0.000/-0.002 in Length Tolerance +/- 1.00 in Typical Tensile Strength (PSI) Not Rated Typical Yield Strength (PSI) 60 000 psi Typical Hardness 85

    More Info

    price : 936.00 Baht / EA


    add to cart
  • 2197863

    Cage Nut Pln CrbStl 1/2 -13 .092x.87 5

    BRAND : UNBRANDED

    PART NO : 1LBF1

    Cage Nut Cage Nut System of Measurement Inch Basic Material Steel Square Shape Fastener Finish Zinc Plated Fastener Thread Direction Right Hand Dia./Thread Size 1/2 In.-13 Fastener Thread Type UNC (Coarse) Nut Height 7/16 In. Width 0.870 In. 0.025 In. For Panel Thickness 0.059 to 0.092 In. Center of Hole to Panel Edge 0.410 In. Package Quantity 5

    More Info

    price : 848.00 Baht / PK of 5 PK


    add to cart
  • 2280296

    Rod Stock Aluminum 36 in Overall L

    BRAND : UNBRANDED

    PART NO : 61R2.5-36

    Aluminum Rod 6061 Material Aluminum Outside Diameter 2 1/2 in Overall Length 36 in Mechanical Finish Mill Outside Diameter Tolerance +/-0.024 in Length Tolerance +/-3.000 in Temper T6511 Tensile Strength 45 000 psi Yield Strength 40 000 psi Fabrication Extruded Material Grade 6061 Shape Rod Minimum Temperature -320 Degrees F Maximum Temperature 300 Degrees F Brinell Hardness 95 Heat Treatment Hardened Tolerance Rating Standard Alloy Type 6061-T6511

    More Info

    price : 11,314.00 Baht / EA


    add to cart
  • 2358024

    Lay-In Flat-Cover Wireway 8inWx8inH

    BRAND : HOFFMAN

    PART NO : F88T148GVP

    Wireway NEMA Rating 1 Length 4 ft. Width 8 In. Height 8 In. Cover Type Flat Steel Without Knockouts ANSI 61 Gray Polyester Powder Finish NEMA/UL cUL CSA IEC

    More Info

    price : 24,819.00 Baht / EA


    add to cart