Categories 4
Product Result
-
ITEM NO : 2027907
Finishing Drum 4 1/2 x4 Coarse
BRAND : WALTER SURFACE TECHNOLOGIES
PART NO : 07M442
ABRASIVE FINISHING DRUM
price : 8,676.00 Baht / EA
-
ITEM NO : 2027910
Finishing Drum 4-1/2 x2 Medium
BRAND : WALTER SURFACE TECHNOLOGIES
PART NO : 07M423
ABRASIVE FINISHING DRUM
price : 4,958.00 Baht / EA
-
ITEM NO : 2027912
Finishing Drum 4-1/2 x4 Fine
BRAND : WALTER SURFACE TECHNOLOGIES
PART NO : 07M444
ABRASIVE FINISHING DRUM
price : 9,468.00 Baht / EA
-
ITEM NO : 2027914
Finishing Drum 4-1/2 x4 Ultrafine
BRAND : WALTER SURFACE TECHNOLOGIES
PART NO : 07M446
ABRASIVE FINISHING DRUM
price : 12,038.00 Baht / EA
recent products
-
ITEM NO : 2000797
12.7x19mm POINTED TREE CARBIDE BURR CUT-9
BRAND : YORK
PART NO : YRK2104289K
Carbide Rotary Burrs - Pointed Tree Pointed Tree. All sizes are nominal with a 6mm shank unless other wise stated. Cut Numbers: Cut 6 - Double Cut. Crosscut and double cut to improve control and chipbreaks. Manufactured from high grade tungsten carbide for general-purpose use. Cut 9 - Chipbreaker Chipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron. Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc. up to HRC65 hardness. Please note: • Work piece and tools should always be steady and well supported. • Carbide burrs are not suitable for 'milling' large amounts of material, they are for light stock removal and high revolutions 'LOW FEED - HIGH SPEED'. • Always ensure that at least 70% of the shank length is clamped by the collet or chuck of the tool being used. • Always ensure that the tool is rated to the recommended operating speed of the burr.
price : 1,170.00 Baht / EA
Stock Location QTY Lead time (Days) Local Thailand 59 7 International 59 25 -
ITEM NO : 2001498
75mm/3" DIA HOOK-N-LOOP BACKEDDISCS P400 (PK-25)
BRAND : KOBE
PART NO : KBE2800207A
Hook-n-Loop Sanding Discs - Pk25 No spanners required. 100% of disc can be used, material removal rate is therefore increased. Can be repeatedly removed and re-applied. Silicon carbide abrasive especially suitable for automotive body preparation prior to spraying and for cutting back two-pack paint finishes. Can be used wet or dry.
price : 1,336.00 Baht / EA
Stock Location QTY Lead time (Days) Local Thailand 8 7 International 8 25 -
ITEM NO : 2473788
Disc Holder Adaptor 3/8In 2-21/2InL
BRAND : CLIMAX METAL PRODUCTS
PART NO : W-23MSP
Disc Retainer Nut Fits Hole (In.) 3/8 Shank Dia (In.) 1/4 Length (In.) 2-1/2 Max Wheel Width (In.) 3/4 Washer O.D. (In.) 3/4 For Use With For Mounting Various Abrasive and Finishing Wheels Such As Buffs Cut-Off Wheels Wire Brushes Non-Woven Wheels Etc.
price : 424.00 Baht / EA
-
ITEM NO : 2506813
Bore Polisher Extension Mandrel
BRAND : MERIT
PART NO : 8834154463
Bore Polisher Extension Mandrel Shank Dia 1/4 In. Pilot Length 4 In. Thread Size 1/4 in - 20 In. For Use With B4 and B8 Bore Polisher
price : 504.00 Baht / EA
-
ITEM NO : 2591982
Air Cooled Backing Pad 7 in.
BRAND : CENTURY DRILL AND TOOL
PART NO : 77195
Air Cooled Backing Pad 7 in.
price : 1,544.00 Baht / EA
