Categories 4
Product Result
-
ITEM NO : 2286075
Powder Actuated Gun Semi Auto 27 Caliber
BRAND : RAMSET
PART NO : COBRA
Powder Actuated Gun Semi Automatic Strip Shot 0.27 Caliber Loads Fasteners 2 -1/2 in Pins and 3 in Pin with Washer Capacity Tool Length (In.) 13-1/4 Tool Weight (Lb.) 4-1/2 Steel Construction Powder Load Automatically Ejects Ergonomic Design Trigger Operated For General Purpose Concrete Masonry And Steel Fastening Includes Safety Glasses
price : 23,837.00 Baht / EA
-
ITEM NO : 2334322
Powder Actuated Gun Semi Automatic
BRAND : DEWALT ENGINEERED BY POWERS
PART NO : 52000-PWR
Powder Actuated Tool Semi Automatic 0.27 Caliber Loads Fasteners 0.3 Head Pin Tool Length (In.) 19-1/2 Tool Weight (Lb.) 13.2 Low Velocity Semi-Automatic Remodeling Electrical Maintenance Telecommunications
price : 23,236.00 Baht / EA
-
ITEM NO : 2334323
Powder Actuated Gun Semi Automatic
BRAND : DEWALT ENGINEERED BY POWERS
PART NO : 52019-PWR
Powder Actuated Tool Semi Automatic 0.27 Caliber Loads Fasteners 0.3 Head Pin Tool Length (In.) 19-1/2 Tool Weight (Lb.) 13.1 Low Velocity Semi-Automatic with Power Adjuster Remodeling Electrical Maintenance Telecommunications
price : 51,058.00 Baht / EA
recent products
-
ITEM NO : 2000769
10mmx19mm CYLINDRICAL BALL NOSED CARB' BURR DBL CU
BRAND : YORK
PART NO : YRK2101246K
Carbide Rotary Burrs - Cylindrical Ball Nosed Cylindrical Ball Nosed. All sizes are nominal with a 6mm shank unless other wise stated. Cut Numbers: Cut 3 - Rapid Cut. for use on softer non ferrous and plastic materials, i.e aluminium, fibreglass, plastics, hard rubber and zinc alloy, Cut 6 - Double Cut. Crosscut and double cut to improve control and chipbreaks. Manufactured from high grade tungsten carbide for general-purpose use. Cut 9 - Chipbreaker Chipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron. Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc. up to HRC65 hardness. Please note: • Work piece and tools should always be steady and well supported. • Carbide burrs are not suitable for 'milling' large amounts of material, they are for light stock removal and high revolutions 'LOW FEED - HIGH SPEED'. • Always ensure that at least 70% of the shank length is clamped by the collet or chuck of the tool being used. • Always ensure that the tool is rated to the recommended operating speed of the burr.
price : 983.00 Baht / EA
Stock Location QTY Lead time (Days) Local Thailand 539 7 International 519 25