Categories 4
Product Result
-
ITEM NO : 2224683
Pedestal Base 27 Dia
BRAND : DAYTON
PART NO : 1ZCP3
Pedestal Base Fan Accessory Type Pedestal Base Base Dia 27 In. Material Steel For Use With 1VCH4 1VCH5 Safety Yellow Fan Accessory Finish Polyester Powder Coated 59 in Height Adjustable Height 41-1/2 in to 59 In. Includes Assembly Hardware Standards Meets UL Std. 507 tilt test when used with Dayton Air Circulators Heads up to 30 In.
price : 20,082.00 Baht / EA
-
ITEM NO : 2224684
Pedestal Base 28 Length
BRAND : DAYTON
PART NO : 1ZCP4
Open Pedestal Base Fan Accessory Type Pedestal Base Material Steel For Use With Dayton Yoke-Mounted Air Circulator Heads Up Through 30 In. Gray Fan Accessory Finish Polyester Powder Coated 58-1/2 in Height 38 in Width 38 in Length Adjustable Height 41-1/2 in to 58-1/2 In. Includes Assembly Hardware Standards Meets UL Std. 507 tilt test when used with Dayton Air Circulators Heads up to 30 In.
price : 26,850.00 Baht / EA
recent products
-
ITEM NO : 2000843
12.7x28mm CONICAL 14 DEGCARBIDE BURR DBL CUT
BRAND : YORK
PART NO : YRK2108326K
Carbide Rotary Burrs - Conical 14° Conical 14°. All sizes are nominal with a 6mm shank unless other wise stated. Cut Numbers: Cut 6 - Double Cut. Crosscut and double cut to improve control and chipbreaks. Manufactured from high grade tungsten carbide for general-purpose use. Cut 9 - Chipbreaker Chipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron. Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc. up to HRC65 hardness. Please note: • Work piece and tools should always be steady and well supported. • Carbide burrs are not suitable for 'milling' large amounts of material, they are for light stock removal and high revolutions 'LOW FEED - HIGH SPEED'. • Always ensure that at least 70% of the shank length is clamped by the collet or chuck of the tool being used. • Always ensure that the tool is rated to the recommended operating speed of the burr.
price : 1,335.00 Baht / EA
Stock Location QTY Lead time (Days) Local Thailand 170 7 International 170 25 -
ITEM NO : 2280659
Flange Bolts Fastener L 1 1/2 in PK10
BRAND : FABORY
PART NO : U01049.050.0150
Flange Bolt System of Measurement Inch Basic Material Steel Material Grade Grade 5 Fastener Finish Zinc Plated Head Type - Bolts Hex Serrated Flange Dia./Thread Size 1/2 In.-13 Fastener Length 1-1/2 In. Fastener Thread Direction Right Hand Fastener Thread Type UNC (Coarse) Fastener Thread Style Fully Threaded IFI-111 Min Thread Length 1-1/4 In. Head Height 1/2 In. Head Width 3/4 In. Flange Dia 1-5/64 In. Tensile Strength 120 000 psi Rockwell Hardness C25 to C34
price : 757.00 Baht / PK of 10 PK
-
ITEM NO : 2311998
Boiler Brush Weil McLain 30 In.
BRAND : TOUGH GUY
PART NO : 2XTE5
Boiler Brush Weil McLain Boiler Single Spiral/Single Stem Fill Type Straight Wire Brush Length (In.) 2-3/4 Brush Dia (In.) 1-1/2 x 1-1/8 Handle Type Wooden and Twisted Wire Handle Length (In.) 27-1/4 Handle Dia (In.) 1/4 Overall Length (In.) 30
price : 701.00 Baht / EA
-
ITEM NO : 2416172
Air Assembly Set 15 ft. Red/Blue
BRAND : VELVAC
PART NO : 022639
Air Assembly Set Type Coiled Length 15' Outside Dia 1/2 In. Material Nylon Color Red/Blue Temp Range -85 Degrees to 200 Degrees F Standards FMVSS 106 Includes Brass Ends
price : 15,348.00 Baht / EA
-
ITEM NO : 2532709
Body Shim Steel 1-1/8 in PK100
BRAND : DISCO
PART NO : 6016PK
Slotted Shim Shim Material Steel Shim Thickness 0.1250 In. Shim Width 1-1/4 In. Shim Length 1-1/8 In. Slot Width 3/8 In. Slot Depth 13/16 In. Shim Temper Not Rated Color Bright Zinc Tensile Strength (PSI) 7/8 In. Bright Zinc Package Quantity 100
price : 5,187.00 Baht / PK of 100 PK
