Categories 4
Product Result
-
ITEM NO : 3218014
Abrasive Blast Cabinet
BRAND : WESTWARD
PART NO : 10Z916
Abrasive Blast Cabinet Blast Cabinet Grouping Abrasive Blast Cabinet Benchtop Cabinet Design Siphon Feed Type Work Area Dimensions 12 in x 22 in x 18 in Work Area Height 12 in Work Area Width 22 in Work Area Depth 18 in Overall Dimensions 19-11/32 in x 25 in x 20 in Overall Height 19 11/32 in Overall Width 25 in Overall Depth 20 in Top Opening 19 in x 15-1/2 in 20 in x 17 in Window 6.2 cfm Min CFM @ 80 PSI Side Opening No Side Opening Cabinet Material Steel
price : 38,609.00 Baht / EA
-
ITEM NO : 2515828
Abrasive Blast Cabinet
BRAND : ECONOLINE
PART NO : 101696G-A
Abrasive Blast Cabinet Blast Cabinet Grouping Abrasive Blast Cabinet Floor Cabinet Design Siphon Feed Type Work Area Dimensions 23 in x 42 in x 24 In. Work Area Height 23 In. Work Area Width 42 In. Work Area Depth 24 In. Overall Dimensions 65 in x 46 in x 54 In. Overall Height 65 In. Overall Width 46 In. Overall Depth 54 In. Top Opening 42 in x 24 In. 12 in x 24 in Window 12 Min CFM @ 80 PSI Side Opening 17 in x 11 In. Cabinet Material Steel
price : 234,943.00 Baht / EA
-
ITEM NO : 3229055
Abrasive Blast Cabinet
BRAND : ECONOLINE
PART NO : 101691G-A
Abrasive Blast Cabinet Blast Cabinet Grouping Abrasive Blast Cabinet Benchtop Cabinet Design Siphon Feed Type Work Area Dimensions 16 in x 18 in x 16 in Work Area Height 16 in Work Area Width 18 in Work Area Depth 16 in Overall Dimensions 33 in x 19 in x 17 in Overall Height 33 in Overall Width 19 in Overall Depth 17 in Top Opening 18 in x 12 in 6 in x 12 in Window 12 cfm Min CFM @ 80 PSI Side Opening No Side Opening Cabinet Material Steel
price : 65,205.00 Baht / EA
-
ITEM NO : 2886469
Abrasive Blast Cabinet Floor Siphon
BRAND : ALC
PART NO : 40403
Abrasive Blast Cabinet Blast Cabinet Grouping Abrasive Blast Cabinet Floor Cabinet Design Siphon Feed Type Work Area Dimensions 23 in x 36 in x 24 in Work Area Height 23 In. Work Area Width 36 In. Work Area Depth 24 In. Overall Dimensions 36 in x 60 in x 24 In. Overall Height 60 In. Overall Width 36 In. Overall Depth 24 In. Top Opening 13 in x 35 In. 12 in x 24 in Window 15 Min CFM @ 80 PSI Side Opening 11 in x 17 In. Cabinet Material Steel
price : 321,473.00 Baht / EA
-
ITEM NO : 2617267
Abrasive Blast Cabinet Siphon Feed Type
BRAND : ALC
PART NO : 40403L
Abrasive Blast Cabinet Blast Cabinet Grouping Abrasive Blast Cabinet Floor Cabinet Design Siphon Feed Type Work Area Dimensions 23 in x 36 in x 24 In. Work Area Height 23 In. Work Area Width 36 In. Work Area Depth 24 In. Overall Dimensions 36 in x 60 in x 24 In. Overall Height 60 In. Overall Width 36 In. Overall Depth 24 In. Top Opening 13 in x 35 In. 24 in x 12 in Window 15 Min CFM @ 80 PSI Side Opening 11 in x 17 In. Cabinet Material Steel
price : 316,045.00 Baht / EA
-
ITEM NO : 2141381
Pneumatic Blast Cabinet Siphon
BRAND : ALC
PART NO : 40389
Pneumatic Blast Cabinet Blast Cabinet Grouping Abrasive Blast Cabinet Benchtop Cabinet Design Siphon Feed Type Work Area Dimensions 12 in x 22 in x 18 In. Work Area Height 12 In. Work Area Width 22 In. Work Area Depth 18 In. Overall Dimensions 24 in x 21 in x 19 in Overall Height 21 in Overall Width 24 In. Overall Depth 19 In. Top Opening 18 in x 14-1/2 In. 16 in x 20 in Window 15 Min CFM @ 80 PSI Cabinet Material LDPE Polymer Includes Gun and Hose
price : 34,890.00 Baht / EA
-
ITEM NO : 2141382
Polymer Bench Top Cabinet
BRAND : ALC
PART NO : 40390
Pneumatic Blast Cabinet Blast Cabinet Grouping Abrasive Blast Cabinet Benchtop Cabinet Design Siphon Feed Type Work Area Dimensions 30 in x 27 in x 20 In. Work Area Height 27 In. Work Area Width 30 In. Work Area Depth 20 In. Overall Dimensions 31 in x 28 in x 21 In. Overall Height 28 In. Overall Width 31 In. Overall Depth 21 In. Top Opening 15 in x 27 In. 27 in x 15 in Window 15 Min CFM @ 80 PSI Cabinet Material LDPE Polymer Includes Gun and Hose Abrasive Blasting
price : 45,932.00 Baht / EA
-
ITEM NO : 2141383
Polymer Floor Model Cabinet 36x24
BRAND : ALC
PART NO : 40391
Pneumatic Blast Cabinet Blast Cabinet Grouping Abrasive Blast Cabinet Floor Cabinet Design Siphon Feed Type Work Area Dimensions 35 in x 23 in x 23 In. Work Area Height 23 In. Work Area Width 35 In. Work Area Depth 23 In. Overall Dimensions 38 in x 58 in x 24 in Overall Height 58 In. Overall Width 38 In. Overall Depth 24 In. Top Opening 16 in x 33 in 33 in x 15 in Window Cabinet Material LDPE Polymer Includes Gun and Hose Light Kit Abrasive Blasting
price : 105,266.00 Baht / EA
recent products
-
ITEM NO : 2000642
3x14mm CYL. CARBIDE END CUT BURR CUT 9
BRAND : KENNEDY
PART NO : KEN2100080K
Carbide Burrs - Cylindrical-End Cutting Cylindrical-End Cutting. All sizes are nominal. Sizes marked * are 3mm shank, all others are 6mm shank. Cut Numbers: Cut 3 - Rapid Cut For use on softer non-ferrous and plastic materials, i.e. aluminium, fibreglass, plastics, hard rubber and zinc alloy. Cut 9 - Chipbreaker Chipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron. Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc. up to HRC65 hardness. Please note: Workpiece and tools should always be steady and well supported. Carbide burrs are not suitable for 'milling' large amounts of material, they are for light stock removal at high rpm's 'LOW FEED - HIGH SPEED'. Always ensure that at least 70% of the shank length is clamped by the collet or chuck of the tool being used. Always ensure that the tool is rated to the recommended operating speed of the burr.
price : 374.00 Baht / EA
Stock Location QTY Lead time (Days) Local Thailand 4 7 International 15 25 -
ITEM NO : 3218602
3x5in Screen
BRAND : ALC
PART NO : 40029
Blasting Accessory Grouping Hoods 3x5in Screen For Use With 40339 3 x 5 in Polymer
price : 646.00 Baht / EA
-
ITEM NO : 2000711
3x11mm CONICAL 14DEG. CARBIDE BURR CUT 9
BRAND : KENNEDY
PART NO : KEN2108120K
Carbide Burrs - Conical 14° Conical 14°. All sizes are nominal. Sizes marked * are 3mm shank, all others are 6mm shank. Cut Numbers: Cut 3 - Rapid Cut For use on softer non-ferrous and plastic materials, i.e. aluminium, fibreglass, plastics, hard rubber and zinc alloy. Cut 9 - Chipbreaker Chipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron. Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc. up to HRC65 hardness. Please note: Workpiece and tools should always be steady and well supported. Carbide burrs are not suitable for 'milling' large amounts of material, they are for light stock removal at high rpm's 'LOW FEED - HIGH SPEED'. Always ensure that at least 70% of the shank length is clamped by the collet or chuck of the tool being used. Always ensure that the tool is rated to the recommended operating speed of the burr.
price : 342.00 Baht / EA
Stock Location QTY Lead time (Days) Local Thailand 2 7 International 11 25 -
ITEM NO : 2001206
A32 MOUNTED POINT
BRAND : KENNEDY
PART NO : KEN2500320K
A Shape Mounted Points High-quality 'A' Shape Mounted Points - with a Shank Diameter of 6mm. Features and Benefits • All points are aluminium oxide with 'rubenite™' as standard, providing vastly improved durability & reliability • Available in a wide range of shapes and sizes to suit every need Typical Applications • Suitable for portable die and straight hand grinders • For all general purpose grinding and deburring on steels and most metals Notes • Shank diameters are metric as listed below with inch sizes available on request • Maximum speeds are quoted assuming that collet to back of point does not exceed 12.7mm (1/2") and are for guidance only
price : 79.00 Baht / EA
Stock Location QTY Lead time (Days) Local Thailand 218 7 International 218 25 -
ITEM NO : 2001257
B123 MOUNTED POINT
BRAND : KENNEDY
PART NO : KEN2501230K
B Shape Mounted Points ‘B’ Shape - Shank Diameter 3mm Suitable for portable die and straight hand grinders. All points are aluminium oxide with ‘rubenite™’ as standard for all general-purpose grinding and deburring on steels and most metals. Shank diameters are metric as listed below with inch sizes available on request. Maximum speeds are quoted assuming that collet to back of point does not exceed 12.7mm (1/2”) and are for guidance only.
price : 58.00 Baht / EA
Stock Location QTY Lead time (Days) Local Thailand 404 7 International 404 25
