Categories 4
Product Result
-
ITEM NO : 3228473
Arbor Hole 1 With A 1/4X1/8 Keyway
BRAND : WEILER
PART NO : 01250-12
Arbor Hole 1 With A 1/4X1/8+Keyway
price : 5,240.00 Baht / EA
-
ITEM NO : 2778209
Brush Drive Arbor 7/8 Stem L
BRAND : AMPCO
PART NO : DA-10
Brush Drive Arbor Arbor Hole (In.) 1/2 Shaft Length (In.) 3/4 Stem Dia (In.) 1/4 Stem Length (In.) 7/8 Max RPM 20 000 Slip Fit For Use With Wheel Brushes with 1/2 in Plain Arbors Number of Pieces 4
price : 708.00 Baht / EA
-
ITEM NO : 2529953
Drive Arbor w Threaded Shaft 5/8 Stem L
BRAND : BRUSH RESEARCH MFG.
PART NO : UA4
Drive Arbor with Threaded Shaft Arbor Hole (In.) 3/8 Shaft Length (In.) 5/8 Stem Dia (In.) 1/4 Stem Length (In.) 5/8 Flush Mount For Use With Brushes with Maximum Diameter of 4 In. Number of Pieces 2 Includes (2) Adapters
price : 470.00 Baht / EA
recent products
-
ITEM NO : 2000669
10x20mm CYL. CARBIDE BALLNOSE BURR CUT 9
BRAND : KENNEDY
PART NO : KEN2101240K
Carbide Burrs - Cylindrical Ball Nosed Cylindrical Ball Nosed All sizes are nominal. Sizes marked * are 3mm shank, all others are 6mm shank. Cut Numbers: Cut 3 - Rapid Cut For use on softer non-ferrous and plastic materials, i.e. aluminium, fibreglass, plastics, hard rubber and zinc alloy. Cut 9 - Chipbreaker Chipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron. Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc. up to HRC65 hardness. Please note: Workpiece and tools should always be steady and well supported. Carbide burrs are not suitable for 'milling' large amounts of material, they are for light stock removal at high rpm's 'LOW FEED - HIGH SPEED'. Always ensure that at least 70% of the shank length is clamped by the collet or chuck of the tool being used. Always ensure that the tool is rated to the recommended operating speed of the burr.
price : 1,063.00 Baht / EA
Stock Location QTY Lead time (Days) Local Thailand 2806 7 International 2804 25 -
ITEM NO : 2120562
Contact Arm Assembly Rubber
BRAND : DYNABRADE
PART NO : 11218
Contact Arm Assembly Size 5/8 x 3/8 In. Rubber Includes 1/2 in W Platen For Use With Mfr No 14000 14010
price : 4,386.00 Baht / EA
-
ITEM NO : 2240985
Vane Pump 8 gpm @ 1200 rpm and 100 psi
BRAND : EATON VICKERS
PART NO : 372639-3
Single Vane Pump Flow Rate 8 gpm @ 1200 rpm and 100 psi Displacement .40 cu in./rev. Inlet Port 1-5/16 In-12 Straight Thread Outlet Port 3/4 In-16 Straight Thread Outlet Port Location Inline With Inlet Shaft Size 1 In Shaft Style Keyed Shaft Rotation Right Mount Type 2 Bolt Flange Max Pressure 2500 psi Min RPM 600 Max RPM 1800 Application Power Units Mobile Equipment Lifts
price : 56,095.00 Baht / EA
-
ITEM NO : 2296801
Shim Roll 316 Annealed 6 x50 In x0.102mm
BRAND : MAUDLIN PRODUCTS
PART NO : 316-004-6-50
Shim Stock Roll Shim Material Stainless Steel Grade 316 Shim Thickness 0.0040 In. Thickness Tolerance +/-0.0002 In. Shim Width 6 In. Width Tolerance +/-0.005 In. Shim Length 50 In. Length Tolerance +/-0.250 In. Shim Temper Soft (Annealed) Tensile Strength (PSI) 80 000 Rockwell Hardness B88 Temp Range (F) - Color - Compress To - Moisture Absorption - Tool and Die Fields for Templates and Shim where Toughness and High Fatigue Strength are Required
price : 1,830.00 Baht / EA
-
ITEM NO : 2731548
Hydrometer 305mm Internal Revenue Code N
BRAND : VEE GEE
PART NO : 6613-N-C
Hydrometer Scale Alcohol Proof Scale Divisions 0.2 Percent / +/-0.3 Percent Tolerance Range 125 to 145 Percent Length 305mm Accuracy +/-0.3 Percent Degrees Hydrometer Solution Temp 60 Degrees F/15 Degrees C Calibration Increments 0.002 Hydrometer Internal Revenue Code N Application IRS Alcohol Standards IRS
price : 26,158.00 Baht / EA
