Categories 1
Product Result
-
ITEM NO : 2000764
6.3x12.7mm CYLINDRICAL BALL NOSE CARB' BURR CUT-9
BRAND : YORK
PART NO : YRK2101129K
Carbide Rotary Burrs - Cylindrical Ball Nosed Cylindrical Ball Nosed. All sizes are nominal with a 6mm shank unless other wise stated. Cut Numbers: Cut 3 - Rapid Cut. for use on softer non ferrous and plastic materials, i.e aluminium, fibreglass, plastics, hard rubber and zinc alloy, Cut 6 - Double Cut. Crosscut and double cut to improve control and chipbreaks. Manufactured from high grade tungsten carbide for general-purpose use. Cut 9 - Chipbreaker Chipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron. Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc. up to HRC65 hardness. Please note: • Work piece and tools should always be steady and well supported. • Carbide burrs are not suitable for 'milling' large amounts of material, they are for light stock removal and high revolutions 'LOW FEED - HIGH SPEED'. • Always ensure that at least 70% of the shank length is clamped by the collet or chuck of the tool being used. • Always ensure that the tool is rated to the recommended operating speed of the burr.
price : 604.00 Baht / EA
Stock Location QTY Lead time (Days) Local Thailand 3 7 International 0 - -
ITEM NO : 2000766
6x16mm CYLINDRICAL BALL NOSE CARBIDE BURR CUT-9
BRAND : YORK
PART NO : YRK2101169K
Carbide Rotary Burrs - Cylindrical Ball Nosed Cylindrical Ball Nosed. All sizes are nominal with a 6mm shank unless other wise stated. Cut Numbers: Cut 3 - Rapid Cut. for use on softer non ferrous and plastic materials, i.e aluminium, fibreglass, plastics, hard rubber and zinc alloy, Cut 6 - Double Cut. Crosscut and double cut to improve control and chipbreaks. Manufactured from high grade tungsten carbide for general-purpose use. Cut 9 - Chipbreaker Chipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron. Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc. up to HRC65 hardness. Please note: • Work piece and tools should always be steady and well supported. • Carbide burrs are not suitable for 'milling' large amounts of material, they are for light stock removal and high revolutions 'LOW FEED - HIGH SPEED'. • Always ensure that at least 70% of the shank length is clamped by the collet or chuck of the tool being used. • Always ensure that the tool is rated to the recommended operating speed of the burr.
price : 587.00 Baht / EA
Stock Location QTY Lead time (Days) Local Thailand 0 - International 0 - -
ITEM NO : 2000769
10mmx19mm CYLINDRICAL BALL NOSED CARB' BURR DBL CU
BRAND : YORK
PART NO : YRK2101246K
Carbide Rotary Burrs - Cylindrical Ball Nosed Cylindrical Ball Nosed. All sizes are nominal with a 6mm shank unless other wise stated. Cut Numbers: Cut 3 - Rapid Cut. for use on softer non ferrous and plastic materials, i.e aluminium, fibreglass, plastics, hard rubber and zinc alloy, Cut 6 - Double Cut. Crosscut and double cut to improve control and chipbreaks. Manufactured from high grade tungsten carbide for general-purpose use. Cut 9 - Chipbreaker Chipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron. Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc. up to HRC65 hardness. Please note: • Work piece and tools should always be steady and well supported. • Carbide burrs are not suitable for 'milling' large amounts of material, they are for light stock removal and high revolutions 'LOW FEED - HIGH SPEED'. • Always ensure that at least 70% of the shank length is clamped by the collet or chuck of the tool being used. • Always ensure that the tool is rated to the recommended operating speed of the burr.
price : 1,033.00 Baht / EA
Stock Location QTY Lead time (Days) Local Thailand 8 7 International 0 - -
ITEM NO : 2000770
9.5x19mm CYLINDRICAL BALLNOSE CARBIDE BURR CUT-9
BRAND : YORK
PART NO : YRK2101249K
Carbide Rotary Burrs - Cylindrical Ball Nosed Cylindrical Ball Nosed. All sizes are nominal with a 6mm shank unless other wise stated. Cut Numbers: Cut 3 - Rapid Cut. for use on softer non ferrous and plastic materials, i.e aluminium, fibreglass, plastics, hard rubber and zinc alloy, Cut 6 - Double Cut. Crosscut and double cut to improve control and chipbreaks. Manufactured from high grade tungsten carbide for general-purpose use. Cut 9 - Chipbreaker Chipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron. Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc. up to HRC65 hardness. Please note: • Work piece and tools should always be steady and well supported. • Carbide burrs are not suitable for 'milling' large amounts of material, they are for light stock removal and high revolutions 'LOW FEED - HIGH SPEED'. • Always ensure that at least 70% of the shank length is clamped by the collet or chuck of the tool being used. • Always ensure that the tool is rated to the recommended operating speed of the burr.
price : 1,033.00 Baht / EA
Stock Location QTY Lead time (Days) Local Thailand 208 7 International 205 25 -
ITEM NO : 2000771
12.7x25mm CYLINDRICAL BALL NOSED CARB' BURR DBL CU
BRAND : YORK
PART NO : YRK2101326K
Carbide Rotary Burrs - Cylindrical Ball Nosed Cylindrical Ball Nosed. All sizes are nominal with a 6mm shank unless other wise stated. Cut Numbers: Cut 3 - Rapid Cut. for use on softer non ferrous and plastic materials, i.e aluminium, fibreglass, plastics, hard rubber and zinc alloy, Cut 6 - Double Cut. Crosscut and double cut to improve control and chipbreaks. Manufactured from high grade tungsten carbide for general-purpose use. Cut 9 - Chipbreaker Chipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron. Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc. up to HRC65 hardness. Please note: • Work piece and tools should always be steady and well supported. • Carbide burrs are not suitable for 'milling' large amounts of material, they are for light stock removal and high revolutions 'LOW FEED - HIGH SPEED'. • Always ensure that at least 70% of the shank length is clamped by the collet or chuck of the tool being used. • Always ensure that the tool is rated to the recommended operating speed of the burr.
price : 1,342.00 Baht / EA
Stock Location QTY Lead time (Days) Local Thailand 47 7 International 43 25 -
ITEM NO : 2000772
11x25mm CYLINDRICAL BALLNOSE CARBIDE BURR CUT-9
BRAND : YORK
PART NO : YRK2101329K
Carbide Rotary Burrs - Cylindrical Ball Nosed Cylindrical Ball Nosed. All sizes are nominal with a 6mm shank unless other wise stated. Cut Numbers: Cut 3 - Rapid Cut. for use on softer non ferrous and plastic materials, i.e aluminium, fibreglass, plastics, hard rubber and zinc alloy, Cut 6 - Double Cut. Crosscut and double cut to improve control and chipbreaks. Manufactured from high grade tungsten carbide for general-purpose use. Cut 9 - Chipbreaker Chipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron. Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc. up to HRC65 hardness. Please note: • Work piece and tools should always be steady and well supported. • Carbide burrs are not suitable for 'milling' large amounts of material, they are for light stock removal and high revolutions 'LOW FEED - HIGH SPEED'. • Always ensure that at least 70% of the shank length is clamped by the collet or chuck of the tool being used. • Always ensure that the tool is rated to the recommended operating speed of the burr.
price : 1,342.00 Baht / EA
Stock Location QTY Lead time (Days) Local Thailand 118 7 International 118 25 -
ITEM NO : 2000774
16x25mm CYLINDRICAL BALLNOSE CARBIDE BURR CUT-9
BRAND : YORK
PART NO : YRK2101409K
Carbide Rotary Burrs - Cylindrical Ball Nosed Cylindrical Ball Nosed. All sizes are nominal with a 6mm shank unless other wise stated. Cut Numbers: Cut 3 - Rapid Cut. for use on softer non ferrous and plastic materials, i.e aluminium, fibreglass, plastics, hard rubber and zinc alloy, Cut 6 - Double Cut. Crosscut and double cut to improve control and chipbreaks. Manufactured from high grade tungsten carbide for general-purpose use. Cut 9 - Chipbreaker Chipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron. Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc. up to HRC65 hardness. Please note: • Work piece and tools should always be steady and well supported. • Carbide burrs are not suitable for 'milling' large amounts of material, they are for light stock removal and high revolutions 'LOW FEED - HIGH SPEED'. • Always ensure that at least 70% of the shank length is clamped by the collet or chuck of the tool being used. • Always ensure that the tool is rated to the recommended operating speed of the burr.
price : 2,302.00 Baht / EA
Stock Location QTY Lead time (Days) Local Thailand 2 7 International 2 25 -
ITEM NO : 2000776
3x6.3mm FLAME SHAPE CARBIDE BURR CUT-9
BRAND : YORK
PART NO : YRK2102129K
Carbide Rotary Burrs - Flame Shape Flame Shape. All sizes are nominal with a 6mm shank unless other wise stated. Cut Numbers: Cut 6 - Double Cut. Crosscut and double cut to improve control and chipbreaks. Manufactured from high grade tungsten carbide for general-purpose use. Cut 9 - Chipbreaker Chipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron. Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc. up to HRC65 hardness. Please note: • Work piece and tools should always be steady and well supported. • Carbide burrs are not suitable for 'milling' large amounts of material, they are for light stock removal and high revolutions 'LOW FEED - HIGH SPEED'. • Always ensure that at least 70% of the shank length is clamped by the collet or chuck of the tool being used. • Always ensure that the tool is rated to the recommended operating speed of the burr.
price : 341.00 Baht / EA
Stock Location QTY Lead time (Days) Local Thailand 0 - International 0 - -
ITEM NO : 2000777
8x19mm FLAME SHAPE CARBIDE BURR DBL CUT
BRAND : YORK
PART NO : YRK2102166K
Carbide Rotary Burrs - Flame Shape Flame Shape. All sizes are nominal with a 6mm shank unless other wise stated. Cut Numbers: Cut 6 - Double Cut. Crosscut and double cut to improve control and chipbreaks. Manufactured from high grade tungsten carbide for general-purpose use. Cut 9 - Chipbreaker Chipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron. Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc. up to HRC65 hardness. Please note: • Work piece and tools should always be steady and well supported. • Carbide burrs are not suitable for 'milling' large amounts of material, they are for light stock removal and high revolutions 'LOW FEED - HIGH SPEED'. • Always ensure that at least 70% of the shank length is clamped by the collet or chuck of the tool being used. • Always ensure that the tool is rated to the recommended operating speed of the burr.
price : 756.00 Baht / EA
Stock Location QTY Lead time (Days) Local Thailand 0 - International 0 - -
ITEM NO : 2000778
8x19mm FLAME SHAPE CARBIDE BURR CUT-9
BRAND : YORK
PART NO : YRK2102169K
Carbide Rotary Burrs - Flame Shape Flame Shape. All sizes are nominal with a 6mm shank unless other wise stated. Cut Numbers: Cut 6 - Double Cut. Crosscut and double cut to improve control and chipbreaks. Manufactured from high grade tungsten carbide for general-purpose use. Cut 9 - Chipbreaker Chipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron. Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc. up to HRC65 hardness. Please note: • Work piece and tools should always be steady and well supported. • Carbide burrs are not suitable for 'milling' large amounts of material, they are for light stock removal and high revolutions 'LOW FEED - HIGH SPEED'. • Always ensure that at least 70% of the shank length is clamped by the collet or chuck of the tool being used. • Always ensure that the tool is rated to the recommended operating speed of the burr.
price : 702.00 Baht / EA
Stock Location QTY Lead time (Days) Local Thailand 349 7 International 349 25 -
ITEM NO : 2000779
12.7x32mm FLAME SHAPE CARBIDE BURR DBL CUT
BRAND : YORK
PART NO : YRK2102326K
Carbide Rotary Burrs - Flame Shape Flame Shape. All sizes are nominal with a 6mm shank unless other wise stated. Cut Numbers: Cut 6 - Double Cut. Crosscut and double cut to improve control and chipbreaks. Manufactured from high grade tungsten carbide for general-purpose use. Cut 9 - Chipbreaker Chipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron. Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc. up to HRC65 hardness. Please note: • Work piece and tools should always be steady and well supported. • Carbide burrs are not suitable for 'milling' large amounts of material, they are for light stock removal and high revolutions 'LOW FEED - HIGH SPEED'. • Always ensure that at least 70% of the shank length is clamped by the collet or chuck of the tool being used. • Always ensure that the tool is rated to the recommended operating speed of the burr.
price : 1,415.00 Baht / EA
Stock Location QTY Lead time (Days) Local Thailand 0 - International 0 - -
ITEM NO : 2000783
3x12.7mm ROUND TREE CARBIDE BURR CUT-9
BRAND : YORK
PART NO : YRK2103089K
Carbide Rotary Burr - Round Tree Round Tree. All sizes are nominal with a 6mm shank unless other wise stated. Cut Numbers: Cut 6 - Double Cut. Crosscut and double cut to improve control and chipbreaks. Manufactured from high grade tungsten carbide for general-purpose use. Cut 9 - Chipbreaker Chipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron. Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc. up to HRC65 hardness. Please note: • Work piece and tools should always be steady and well supported. • Carbide burrs are not suitable for 'milling' large amounts of material, they are for light stock removal and high revolutions 'LOW FEED - HIGH SPEED'. • Always ensure that at least 70% of the shank length is clamped by the collet or chuck of the tool being used. • Always ensure that the tool is rated to the recommended operating speed of the burr.
price : 366.00 Baht / EA
Stock Location QTY Lead time (Days) Local Thailand 0 - International 0 - -
ITEM NO : 2000785
6x16mm ROUND TREE CARBIDEBURR CUT-9
BRAND : YORK
PART NO : YRK2103169K
Carbide Rotary Burr - Round Tree Round Tree. All sizes are nominal with a 6mm shank unless other wise stated. Cut Numbers: Cut 6 - Double Cut. Crosscut and double cut to improve control and chipbreaks. Manufactured from high grade tungsten carbide for general-purpose use. Cut 9 - Chipbreaker Chipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron. Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc. up to HRC65 hardness. Please note: • Work piece and tools should always be steady and well supported. • Carbide burrs are not suitable for 'milling' large amounts of material, they are for light stock removal and high revolutions 'LOW FEED - HIGH SPEED'. • Always ensure that at least 70% of the shank length is clamped by the collet or chuck of the tool being used. • Always ensure that the tool is rated to the recommended operating speed of the burr.
price : 802.00 Baht / EA
Stock Location QTY Lead time (Days) Local Thailand 0 - International 0 - -
ITEM NO : 2000786
10mmx19mm ROUND TREE CARBIDE BURR DBL CUT
BRAND : YORK
PART NO : YRK2103246K
Carbide Rotary Burr - Round Tree Round Tree. All sizes are nominal with a 6mm shank unless other wise stated. Cut Numbers: Cut 6 - Double Cut. Crosscut and double cut to improve control and chipbreaks. Manufactured from high grade tungsten carbide for general-purpose use. Cut 9 - Chipbreaker Chipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron. Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc. up to HRC65 hardness. Please note: • Work piece and tools should always be steady and well supported. • Carbide burrs are not suitable for 'milling' large amounts of material, they are for light stock removal and high revolutions 'LOW FEED - HIGH SPEED'. • Always ensure that at least 70% of the shank length is clamped by the collet or chuck of the tool being used. • Always ensure that the tool is rated to the recommended operating speed of the burr.
price : 943.00 Baht / EA
Stock Location QTY Lead time (Days) Local Thailand 0 - International 0 - -
ITEM NO : 2000787
10mmx19mm ROUND TREE CARBIDE BURR CUT-9
BRAND : YORK
PART NO : YRK2103249K
Carbide Rotary Burr - Round Tree Round Tree. All sizes are nominal with a 6mm shank unless other wise stated. Cut Numbers: Cut 6 - Double Cut. Crosscut and double cut to improve control and chipbreaks. Manufactured from high grade tungsten carbide for general-purpose use. Cut 9 - Chipbreaker Chipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron. Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc. up to HRC65 hardness. Please note: • Work piece and tools should always be steady and well supported. • Carbide burrs are not suitable for 'milling' large amounts of material, they are for light stock removal and high revolutions 'LOW FEED - HIGH SPEED'. • Always ensure that at least 70% of the shank length is clamped by the collet or chuck of the tool being used. • Always ensure that the tool is rated to the recommended operating speed of the burr.
price : 943.00 Baht / EA
Stock Location QTY Lead time (Days) Local Thailand 211 7 International 211 25 -
ITEM NO : 2000789
12.7x25mm ROUND TREE CARBIDE BURR CUT-9
BRAND : YORK
PART NO : YRK2103329K
Carbide Rotary Burr - Round Tree Round Tree. All sizes are nominal with a 6mm shank unless other wise stated. Cut Numbers: Cut 6 - Double Cut. Crosscut and double cut to improve control and chipbreaks. Manufactured from high grade tungsten carbide for general-purpose use. Cut 9 - Chipbreaker Chipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron. Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc. up to HRC65 hardness. Please note: • Work piece and tools should always be steady and well supported. • Carbide burrs are not suitable for 'milling' large amounts of material, they are for light stock removal and high revolutions 'LOW FEED - HIGH SPEED'. • Always ensure that at least 70% of the shank length is clamped by the collet or chuck of the tool being used. • Always ensure that the tool is rated to the recommended operating speed of the burr.
price : 1,137.00 Baht / EA
Stock Location QTY Lead time (Days) Local Thailand 207 7 International 207 25 -
ITEM NO : 2000791
3x12.7mm POINTED TREE CARBIDE BURR DBL CUT
BRAND : YORK
PART NO : YRK2104126K
Carbide Rotary Burrs - Pointed Tree Pointed Tree. All sizes are nominal with a 6mm shank unless other wise stated. Cut Numbers: Cut 6 - Double Cut. Crosscut and double cut to improve control and chipbreaks. Manufactured from high grade tungsten carbide for general-purpose use. Cut 9 - Chipbreaker Chipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron. Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc. up to HRC65 hardness. Please note: • Work piece and tools should always be steady and well supported. • Carbide burrs are not suitable for 'milling' large amounts of material, they are for light stock removal and high revolutions 'LOW FEED - HIGH SPEED'. • Always ensure that at least 70% of the shank length is clamped by the collet or chuck of the tool being used. • Always ensure that the tool is rated to the recommended operating speed of the burr.
price : 335.00 Baht / EA
Stock Location QTY Lead time (Days) Local Thailand 86 7 International 86 25 -
ITEM NO : 2000792
3x12.7mm POINTED TREE CARBIDE BURR CUT-9
BRAND : YORK
PART NO : YRK2104129K
Carbide Rotary Burrs - Pointed Tree Pointed Tree. All sizes are nominal with a 6mm shank unless other wise stated. Cut Numbers: Cut 6 - Double Cut. Crosscut and double cut to improve control and chipbreaks. Manufactured from high grade tungsten carbide for general-purpose use. Cut 9 - Chipbreaker Chipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron. Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc. up to HRC65 hardness. Please note: • Work piece and tools should always be steady and well supported. • Carbide burrs are not suitable for 'milling' large amounts of material, they are for light stock removal and high revolutions 'LOW FEED - HIGH SPEED'. • Always ensure that at least 70% of the shank length is clamped by the collet or chuck of the tool being used. • Always ensure that the tool is rated to the recommended operating speed of the burr.
price : 335.00 Baht / EA
Stock Location QTY Lead time (Days) Local Thailand 0 - International 0 - -
ITEM NO : 2000793
6.3x12.7mm POINTED TREE CARBIDE BURR DBL CUT
BRAND : YORK
PART NO : YRK2104166K
Carbide Rotary Burrs - Pointed Tree Pointed Tree. All sizes are nominal with a 6mm shank unless other wise stated. Cut Numbers: Cut 6 - Double Cut. Crosscut and double cut to improve control and chipbreaks. Manufactured from high grade tungsten carbide for general-purpose use. Cut 9 - Chipbreaker Chipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron. Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc. up to HRC65 hardness. Please note: • Work piece and tools should always be steady and well supported. • Carbide burrs are not suitable for 'milling' large amounts of material, they are for light stock removal and high revolutions 'LOW FEED - HIGH SPEED'. • Always ensure that at least 70% of the shank length is clamped by the collet or chuck of the tool being used. • Always ensure that the tool is rated to the recommended operating speed of the burr.
price : 621.00 Baht / EA
Stock Location QTY Lead time (Days) Local Thailand 6 7 International 0 - -
ITEM NO : 2000794
6.3x12.7mm POINTED TREE CARBIDE BURR CUT-9
BRAND : YORK
PART NO : YRK2104169K
Carbide Rotary Burrs - Pointed Tree Pointed Tree. All sizes are nominal with a 6mm shank unless other wise stated. Cut Numbers: Cut 6 - Double Cut. Crosscut and double cut to improve control and chipbreaks. Manufactured from high grade tungsten carbide for general-purpose use. Cut 9 - Chipbreaker Chipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron. Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc. up to HRC65 hardness. Please note: • Work piece and tools should always be steady and well supported. • Carbide burrs are not suitable for 'milling' large amounts of material, they are for light stock removal and high revolutions 'LOW FEED - HIGH SPEED'. • Always ensure that at least 70% of the shank length is clamped by the collet or chuck of the tool being used. • Always ensure that the tool is rated to the recommended operating speed of the burr.
price : 621.00 Baht / EA
Stock Location QTY Lead time (Days) Local Thailand 0 - International 0 - -
ITEM NO : 2000796
9.5x19mm POINTED TREE CARBIDE BURR CUT-9
BRAND : YORK
PART NO : YRK2104249K
Carbide Rotary Burrs - Pointed Tree Pointed Tree. All sizes are nominal with a 6mm shank unless other wise stated. Cut Numbers: Cut 6 - Double Cut. Crosscut and double cut to improve control and chipbreaks. Manufactured from high grade tungsten carbide for general-purpose use. Cut 9 - Chipbreaker Chipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron. Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc. up to HRC65 hardness. Please note: • Work piece and tools should always be steady and well supported. • Carbide burrs are not suitable for 'milling' large amounts of material, they are for light stock removal and high revolutions 'LOW FEED - HIGH SPEED'. • Always ensure that at least 70% of the shank length is clamped by the collet or chuck of the tool being used. • Always ensure that the tool is rated to the recommended operating speed of the burr.
price : 980.00 Baht / EA
Stock Location QTY Lead time (Days) Local Thailand 2 7 International 26 25 -
ITEM NO : 2000797
12.7x19mm POINTED TREE CARBIDE BURR CUT-9
BRAND : YORK
PART NO : YRK2104289K
Carbide Rotary Burrs - Pointed Tree Pointed Tree. All sizes are nominal with a 6mm shank unless other wise stated. Cut Numbers: Cut 6 - Double Cut. Crosscut and double cut to improve control and chipbreaks. Manufactured from high grade tungsten carbide for general-purpose use. Cut 9 - Chipbreaker Chipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron. Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc. up to HRC65 hardness. Please note: • Work piece and tools should always be steady and well supported. • Carbide burrs are not suitable for 'milling' large amounts of material, they are for light stock removal and high revolutions 'LOW FEED - HIGH SPEED'. • Always ensure that at least 70% of the shank length is clamped by the collet or chuck of the tool being used. • Always ensure that the tool is rated to the recommended operating speed of the burr.
price : 1,228.00 Baht / EA
Stock Location QTY Lead time (Days) Local Thailand 1 7 International 1 25 -
ITEM NO : 2000799
12.7x25mm POINTED TREE CARBIDE BURR CUT-9
BRAND : YORK
PART NO : YRK2104329K
Carbide Rotary Burrs - Pointed Tree Pointed Tree. All sizes are nominal with a 6mm shank unless other wise stated. Cut Numbers: Cut 6 - Double Cut. Crosscut and double cut to improve control and chipbreaks. Manufactured from high grade tungsten carbide for general-purpose use. Cut 9 - Chipbreaker Chipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron. Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc. up to HRC65 hardness. Please note: • Work piece and tools should always be steady and well supported. • Carbide burrs are not suitable for 'milling' large amounts of material, they are for light stock removal and high revolutions 'LOW FEED - HIGH SPEED'. • Always ensure that at least 70% of the shank length is clamped by the collet or chuck of the tool being used. • Always ensure that the tool is rated to the recommended operating speed of the burr.
price : 1,158.00 Baht / EA
Stock Location QTY Lead time (Days) Local Thailand 117 7 International 115 25 -
ITEM NO : 2000801
16x25mm POINTED TREE CARBIDE BURR CUT-9
BRAND : YORK
PART NO : YRK2104409K
Carbide Rotary Burrs - Pointed Tree Pointed Tree. All sizes are nominal with a 6mm shank unless other wise stated. Cut Numbers: Cut 6 - Double Cut. Crosscut and double cut to improve control and chipbreaks. Manufactured from high grade tungsten carbide for general-purpose use. Cut 9 - Chipbreaker Chipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron. Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc. up to HRC65 hardness. Please note: • Work piece and tools should always be steady and well supported. • Carbide burrs are not suitable for 'milling' large amounts of material, they are for light stock removal and high revolutions 'LOW FEED - HIGH SPEED'. • Always ensure that at least 70% of the shank length is clamped by the collet or chuck of the tool being used. • Always ensure that the tool is rated to the recommended operating speed of the burr.
price : 2,207.00 Baht / EA
Stock Location QTY Lead time (Days) Local Thailand 24 7 International 24 25 -
ITEM NO : 2000803
6.3x9.5mm OVAL SHAPE CARBIDE BURR DBL CUT 3mm SHK
BRAND : YORK
PART NO : YRK2105166K
Carbide Rotary Burrs - Oval shape Oval Shape. All sizes are nominal with a 6mm shank unless other wise stated. Cut 9 - Chipbreaker Chipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron. Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc. up to HRC65 hardness. Please note: • Work piece and tools should always be steady and well supported. • Carbide burrs are not suitable for 'milling' large amounts of material, they are for light stock removal and high revolutions 'LOW FEED - HIGH SPEED'. • Always ensure that at least 70% of the shank length is clamped by the collet or chuck of the tool being used. • Always ensure that the tool is rated to the recommended operating speed of the burr.
price : 432.00 Baht / EA
Stock Location QTY Lead time (Days) Local Thailand 24 7 International 24 25 -
ITEM NO : 2000804
6.3x9.5mm OVAL SHAPE CARBIDE BURR CUT-9
BRAND : YORK
PART NO : YRK2105169K
Carbide Rotary Burrs - Oval shape Oval Shape. All sizes are nominal with a 6mm shank unless other wise stated. Cut 9 - Chipbreaker Chipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron. Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc. up to HRC65 hardness. Please note: • Work piece and tools should always be steady and well supported. • Carbide burrs are not suitable for 'milling' large amounts of material, they are for light stock removal and high revolutions 'LOW FEED - HIGH SPEED'. • Always ensure that at least 70% of the shank length is clamped by the collet or chuck of the tool being used. • Always ensure that the tool is rated to the recommended operating speed of the burr.
price : 476.00 Baht / EA
Stock Location QTY Lead time (Days) Local Thailand 21 7 International 21 25 -
ITEM NO : 2000806
9.5x16mm OVAL SHAPE CARBIDE BURR CUT-9
BRAND : YORK
PART NO : YRK2105209K
Carbide Rotary Burrs - Oval shape Oval Shape. All sizes are nominal with a 6mm shank unless other wise stated. Cut 9 - Chipbreaker Chipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron. Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc. up to HRC65 hardness. Please note: • Work piece and tools should always be steady and well supported. • Carbide burrs are not suitable for 'milling' large amounts of material, they are for light stock removal and high revolutions 'LOW FEED - HIGH SPEED'. • Always ensure that at least 70% of the shank length is clamped by the collet or chuck of the tool being used. • Always ensure that the tool is rated to the recommended operating speed of the burr.
price : 993.00 Baht / EA
Stock Location QTY Lead time (Days) Local Thailand 365 7 International 365 25 -
ITEM NO : 2000808
12.7x22mm OVAL SHAPE CARBIDE BURR CUT-9
BRAND : YORK
PART NO : YRK2105249K
Carbide Rotary Burrs - Oval shape Oval Shape. All sizes are nominal with a 6mm shank unless other wise stated. Cut 9 - Chipbreaker Chipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron. Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc. up to HRC65 hardness. Please note: • Work piece and tools should always be steady and well supported. • Carbide burrs are not suitable for 'milling' large amounts of material, they are for light stock removal and high revolutions 'LOW FEED - HIGH SPEED'. • Always ensure that at least 70% of the shank length is clamped by the collet or chuck of the tool being used. • Always ensure that the tool is rated to the recommended operating speed of the burr.
price : 1,159.00 Baht / EA
Stock Location QTY Lead time (Days) Local Thailand 11 7 International 11 25 -
ITEM NO : 2000809
16x25mm OVAL SHAPE CARBIDE BURR CUT-9
BRAND : YORK
PART NO : YRK2105329K
Carbide Rotary Burrs - Oval shape Oval Shape. All sizes are nominal with a 6mm shank unless other wise stated. Cut 9 - Chipbreaker Chipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron. Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc. up to HRC65 hardness. Please note: • Work piece and tools should always be steady and well supported. • Carbide burrs are not suitable for 'milling' large amounts of material, they are for light stock removal and high revolutions 'LOW FEED - HIGH SPEED'. • Always ensure that at least 70% of the shank length is clamped by the collet or chuck of the tool being used. • Always ensure that the tool is rated to the recommended operating speed of the burr.
price : 1,897.00 Baht / EA
Stock Location QTY Lead time (Days) Local Thailand 55 7 International 45 25 -
ITEM NO : 2000811
3x2.8mm BALL SHAPE CARBIDE BURR CUT-9
BRAND : YORK
PART NO : YRK2106089K
Carbide Rotary Burrs - Ball Shape Ball Shape. All sizes are nominal with a 6mm shank unless other wise stated. Cut Numbers: Cut 6 - Double Cut. Crosscut and double cut to improve control and chipbreaks. Manufactured from high grade tungsten carbide for general-purpose use. Cut 9 - Chipbreaker Chipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron. Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc. up to HRC65 hardness. Please note: • Work piece and tools should always be steady and well supported. • Carbide burrs are not suitable for 'milling' large amounts of material, they are for light stock removal and high revolutions 'LOW FEED - HIGH SPEED'. • Always ensure that at least 70% of the shank length is clamped by the collet or chuck of the tool being used. • Always ensure that the tool is rated to the recommended operating speed of the burr.
price : 314.00 Baht / EA
Stock Location QTY Lead time (Days) Local Thailand 0 - International 0 -





